STRICH DYNACOMP Guitar Compressor Pedal Owner’s Manual
- June 17, 2024
- STRICH
Table of Contents
STRICH DYNACOMP Guitar Compressor Pedal
Congratulations
Congratulations on your ownership this effect pedal. Before using the pedal, please carefully read the manual, which offers important information concerning how to properly operate the unit.
Product Description
Precautions When Connecting
- To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
- Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this pedal. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
- Raise the amp volume only after turning on the power to all connected devices.
- Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
When powering up: Turn on the power to your guitar amp last.
When powering down: Turn off the power to your guitar amp first.
Specifications
Input Impedance: Min. 100k Ohm; Max. 350k Ohm
Output Impedance: 300 Ohm
Recommended Load Impedance: 10 kohm
Equivale Input Noise: -90 dBu or less
Power Supply: 9V AC adapter
Current Draw: 10mA
Dimension: 115mm (length) x73mm (width) x48mm (thickness)
Weight: 270g
Accessory: Owner’s Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>