SW-MOTECH mss-23-017-10000-b Motec Engine Guard Instruction Manual
- June 17, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH mss-23-017-10000-b Motec Engine Guard Instruction Manual
Thank you for choosing this premium product from SW-MOTECH. Visit our online shop for more information (e.g. model assignments). Required documents (e.g. national type approval) are available there for you to download.
Please read and understand all the instructions, safety information and warnings in these mounting instructions before mounting and using the product in order to avoid injury and damage. Keep these mounting instructions for reference.
This product was developed for vehicles in factory condition. Compatibility with original accessories or accessories from other manufacturers cannot be guaranteed.
These mounting instructions have been prepared to the best of our current knowledge. No legal claims relating to accuracy can be made. Errors and omissions excepted. We reserve the right to make technical and design changes. The copyright is held by SW-MOTECH.
SAFETY WARNING SYMBOL
This warning symbol is used in these mounting instructions to warn of deadly
dangers, injuries or other hazards. The words DANGER, WARNING or
CAUTION are used as part of this warning symbol to convey important safety
messages and information relating to the installation and use of this product.
These words, together with the safety warning symbol, mean:
DANGER: Indicates a hazardous situation which, if not avoided, will result in
death or serious injury!
WARNING: Indicates a hazardous situation which, if not avoided, may result in
death or serious injury!
CAUTION: Indicates a hazardous situation which, if not avoided, may result in
minor or moderate injury!
NOTE: Important information, but not relating to a risk of death or injury
(property damage only)!
GENERAL INFORMATION
WARNING: Assembly and/or maintenance of this product requires advanced
technical skill, appropriate tools, and a good understanding of tool usage and
torque specifications. For your own safety, SW-MOTECH recommends having the
assembly and/or maintenance carried out by a qualified and certified
motorcycle workshop.
WARNING: If you do choose to assemble this product yourself, carefully and
fully read the mounting instructions before assembly and use, and follow all
instructions to avoid serious injury or death. Also observe all relevant
information in the vehicle manual when mounting or using the product. IF YOU
DO NOT UNDERSTAND ANY PART OF THESE MOUNTING INSTRUCTIONS OR NEED AN
EXPLANATION AS TO A SPECIFIC INSTRUCTION, DO NOT ATTEMPT TO INSTALL THIS
PRODUCT WITHOUT CONSULTING SW-MOTECH FOR ASSISTANCE!
PREPARATION : Read the mounting instructions carefully and make sure that all parts on the parts list are available.
CAUTION : Ensure that your vehicle is standing securely. Switch off the engine and remove the ignition key. Allow the engine/exhaust to cool down if necessary. Disconnect the battery when working on the electrical system. Only use proper tools and always wear safety goggles and gloves during assembly and maintenance. Have a second person help you with assembly and maintenance.
ASSEMBLY : All parts and connections removed from the vehicle must be reinstalled according to the vehicle manufacturer’s specifications or replaced with parts and hardware supplied by SW-MOTECH.
WARNING: Secure all threads with a medium-strength liquid thread locker, unless otherwise specified.
DANGER: Tightening torques not defined by SW-MOTECH must be obtained from the vehicle manufacturer or a certified motorbike workshop.
FUNCTIONAL CHECK: After mounting the product, ensure that no moving parts are obstructed and that the function of the vehicle is not impeded. Cables and hoses must not rub against each other and/or be hindered in any way.
WARNING: Carry out a comprehensive functionality check before you start
to drive. Check the tightening torque of all connections and the tight fit
of the product after the first 50 km and then at regular intervals.
Mounted accessories can change the handling and stability of the vehicle
info@sw-motech.com
www.sw-motech.com
https://www.youtube.com/user/swbccom
https://www.tiktok.com/@swmotech
https://www.instagram.com/swmotech/
https://www.facebook.com/SWMOTECH/
LEGEND OVERVIEW
PARTS LIST
PRODUCT INFORMATION
PRODUCT-SPECIFIC NOTES
WARNING: Ground clearance may be restricted by this product! Particular
caution is required when cornering at extreme inclination and/or driving on
uneven ground (e.g. curbs and bumps)!
WARNING : Motorcycle exhaust pipes often have large geometric tolerances.
Make sure that there is sufficient distance between all parts in the affected
areas!
NOTE : Please observe the country-specific regulations for the registration/operation of your vehicle or any applicable TÜV regulations. After installation, parts subject to registration should be entered in the vehicle documents by your test center.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
Errors and omissions excepted
Subject to technical and design changes.
References
- Modesto Technologies
- SW-MOTECH | Motorcycle parts (@swmotech) • Instagram photos and videos
- SW-MOTECH Shop - qualitativ hochwertiges Motorradzubehör
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>