XTM 650261 12V Mini Control Box Instruction Manual
- June 12, 2024
- XTM
Table of Contents
XTM 650261 12V Mini Control Box
12V MINI CONTROL BOX
Instruction Manual
+ The XTM 12V mini control box is the perfect pre-wired DIY solution to power
most of your 12V accessories in one central location. Please read and
understand all the instructions carefully before installation and operation.
FEATURES
+ 12V CONTROL PANEL, PRE-WIRED SUITABLE FOR MOST 4WD, TRAILER OR CARAVAN
APPLICATIONS
+ FEATURES 2 X QUICK CONNECT PLUGS, 4 X USB PORTS, 1 X TYPE-C PORT, 1 X QC3.0
PORT, 3 X CIG SOCKETS , LED VOLTMETER WITH MULTI-COLOUR
+BUILT-IN LED LIGHT
+ INPUT CONNECTION: 50A QUICK CONNECT PLUG WITH 90CM CABLE
SPECIFICATIONS
| MAXIMUM CUMULATIVE AMP: | 50A |
|---|---|
| VOLTMETER: | MULTI-COLOUR DISPLAY, d.c. 12V |
| USB PORT(EACH): | d.c. 5V 2.1A OUTLET |
| TYPE-C PORT: | d.c. 5V 18W OUTLET |
| QC 3.0 PORT: | d.c. 5V 18W OUTLET |
| CIG SOCKET (EACH): | d.c. 12V 15A |
| QUICK CONNECT PLUG: | 50A TOTAL (SUPPORT MAX 50A WHEN SINGLE USE) |
| PRE-WIRED FUSE: | 30A FOR 3 X CIG SOCKETS |
| CIRCUIT BREAKER FOR QUICK CONNECT PLUG: | AUTOMATIC RESET, 50A |
| OPERATING TEMPERATURE: | -5-45°C |
| BOX DIMENSIONS: | 18 X 12 X 6CM |
| WEIGHT: | 845G |
SAFETY WARNINGS
+ Keep children and pets away from the control box.
+ Installation by a licensed auto electrician is recommended.
+ Always use appropriate personal protective equipment when installing.
+ Always disconnect any power source, eg car battery before commencing any
electrical work, to ensure person and vehicle safety.
+ Do not insert any body parts or tooling into any components.
+ Ensure all exposed wires are covered.
+ Do not expose the control box to wet weather.
+ Provide as much ventilation as possible for the control box to decrease
heat accumulation.
INSTALLATION INSTRUCTIONS
+ Ensure the installation area is a flat surface and accessibility to the unit is not obstructed.
+ Ensuring the unit is level use two M4 screws to secure. We recommend predrilling the mounted surface first and fastening the screws by hand screwdriver only. Do not over tighten the mounting screws.
+ Connect the 12Volt supply via the input quick connect plug. This is either a permanent supply from a battery or it could also be from a extension cable of quick connect plug from a portable battery box when using the unit for portable use. The unit is now ready for use.
+ Once complete, the two switch indicators light up while the power go into the panel. If there is no power, check cabling, wiring, 12v switch is on, test using a 12v multimeter, or contact a licensed auto electrician.
FUSE REPLACING INSTRUCTION
+ Disassemble the unit from wall or other surface
+ Unscrew the screws to open the box
+ Take out the melted fuse and replace with a new 30A fuse
WARRANTY
Our product is guaranteed to be free from quality and manufacturing defects
for a period of 12 months.
If your product becomes defective during this period, SRGS PTY LTD will offer
you either a replacement, credit or refund where a product is faulty; wrongly
described; different from the sample shown to you or do not do what they are
supposed to do.
This warranty will not cover substantially modified product; misuse or abuse
of the product contrary to user instructions or packaging label; change of
mind and normal wear and tear.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and failure does not amount to a major failure.
To claim the warranty, take the product to the front Service Desk of your
nearest store of purchase. You will need to show receipt or other proof of
purchase. Additional information may be required to process your claim.
Should you not be able to provide proof of purchase with a receipt or bank
statement, identification showing name, address and signature may be required
to process your claim.
Any expenses relating to the return of your product to the store will normally
have to be paid by you. For online store purchases, SRGS PTY LTD will pay for
the return freight for any product assessed as having a major failure.
The benefits to the customer given by this warranty are in addition to other
rights and remedies of the Australian Consumer Law in relation to the goods or
services to which this warranty relates.
This warranty is provided by SRGS PTY LTD, 6 Coulthards Avenue, Strathpine QLD
4500, Australia.
Phone : 1300 880 764
CUSTOMER SERVICES
PLU: 650261
CODE: DT220719
Manufactured and packaged for
SRGS PTY LTD
ABN 23 113 230 050
6 Coulthards Avenue,
Strathpine QLD 4500, Australia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>