EDIFIER TO-U7 Pro True Wireless Cancellation In Ear Headphones User Manual

EDIFIER TO-U7 Pro True Wireless Cancellation In-Ear Headphones

On/Off

1. On when the case is opened.
2. Off when placed in the case and closed.

Note
If there is no Bluetooth connection within 10 minutes of turning on the headphones, they will automatically turn off; if there is no Bluetooth connection in noise cancelling mode or noise cancelling mode ambient sound, the headphones will automatically turn off after 2 hours.

Pairing

1. The earbuds are placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. The LEDs will light up one by one in a clockwise direction, showing circularly.
3. Select “EDIFIER TO-U7 Pro” in your device setting to connect. The LEDs will flash once and turn off when the connection is successful.

1st Pairing

1. Earbuds are placed in the case and keep the case open. The LEDs will light up one by one in a clockwise direction, displayed circularly.
2. Select “EDIFIER TO-U7 Pro” in your device setting to connect. The LEDs will flash once and turn off when the connection is successful.
   note: The headphones will automatically connect to the device used last time for later use.

Restart

1. The earbuds are placed in the case and keep the case open.
2. Press the case button 3 times to reinsert the left connection and right and clear the pairing records.
3. The LEDs will flash twice and turn off when the connection succeeds. Then, the LEDs will light up one by one in a clockwise direction, displayed circularly.
4. Select “EDIFIER TO-U7 Pro” in your device setting to connect. The LEDs will flash once and turn off when the connection is successful.

Charging

Charging box

1. Connect the case to the power supply with the included Type-C charging cable to load.

2. During charging, the LEDs will light up one by one. After all LEDs are lit, they will change gradually, according to the level of the battery; the LEDs will turn off when the battery is fully charged.
   note: Do not charge the headphones when there is sweat or other liquids inside the port charging, this could damage the headphones by ear.

3. Controls note: 1. Standard sound control: both headphones – turn on cancellation noise & ambient sound & shut off noise cancellation; one phone earpiece – turn off noise cancellation & ambient sound.

4. Images are for illustrative purposes only and may differ from the actual product.

5. Download the Edifier Connect App for more settings and customizable controls.

6. Input: 5V 200mA (Headphones) 5V 1A (Charging box)

Left Touch Panel Right Touch Panel

note

1. Standard sound control: both headphones – turn on cancellation noise & ambient sound & shut off noise cancellation; one phone earpiece – turn off noise cancellation & ambient sound.
2. Images are for illustrative purposes only and may differ from the actual product.
3. Download the Edifier Connect App for more settings and customizable controls. For more information, please visit our website:

Model: EDF280001 Edifier International Limited P.O. Box 6264 General Post Office Hong Kong www.edifier.com 2022 Edifier International Limited. All rights reserved. Printed in China
NOTICE: For the need for technical improvement and updating of the system, the information contained in this document may be subject to change periodically without prior notice.
EDIFIER products will be customized for applications many different. The images and illustrations presented in this manual may differ slightly from the actual product. If any difference is found, the actual product prevails.

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>