luminaire IP44 Pad Instructions
- June 4, 2024
- luminaire
Table of Contents
IP44.DE outside lighting
pad
instructions for use
IP44 Pad
For unpaved beds and greens
- Stick ground spike in the ground.
- Provide the electrical connection between the safety plug and the grounded electrical socket aboveground.
- Optionally fix mains cable in the ground spike.
- Grounded electrical sockets have to correspond to the essential protection class.
- The safety plug signals the movability of the luminaire. Please note, that a fixed installation and/or a connection with an earth joint is not permitted.
light technology:
230V Power LED / 2700K
system performance: 8 W/553 lm
A+ EEC
technical information:
operating voltage 230V / 50Hz supply cable H05RN–F 3G0,75
| protection class
---|---
| safety class 1
| Luminaire is suitable for mounting on normally inflammable fixing surfaces.
| conformity mark
maintenance:
Disconnect the electrical installation.
This luminaire contains built-in LED lamps. The LED lamps can be replaced by
IP44.de in case of a failure of the LED. In this case, please get in touch
with your retailer.
dimming:
The luminaire can be dimmed with an approved leading- or trailing-edge dimmer. Please contact the IP44.de service center for a list of approved dimmers.
care:
Regularly clean luminaire from dirt and deposits. Do not use a high-pressure cleaner for cleaning. Please note care instructions at www.IP44.de.
safety:
We point out that the electric connection of light fixtures has to be done by a certified installer. We assume no accountability for damages that are a result of non-appropriate mounting or application of the luminaire. Modifications on the luminaire will result in a loss of warranty.
assembly instruction:
The luminaire may not come into contact with highly acidic or alkaline soils, or with other aggressive substances, chemicals or fertilizers.
welcome@IP44.de.
www.IP44.de
00 06/21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>