FX Luminaire FC-3LED-CW-BZ FC Well Light Instruction Manual
- June 12, 2024
- FX Luminaire
Table of Contents
FX Luminaire FC-3LED-CW-BZ FC Well Light
Product Information
The LED Well Lights are premium landscape lighting fixtures designed for recessed installation in an upward direction. They are available in different types, including Ring (RG), Cowling (CW), Wash (GW), and Louver (LV). The fixtures are made with die-cast brass or aluminum construction and feature a two-layer marine-grade anodization and powder coat finish. They have tamper- resistant features and are compatible with Luxor technology. The lights are phase and PWM dimmable and have an input voltage range of 10-15V. The FC Well Lights come with different specifications, including output, input voltage, input power, efficacy, color rendering index (CRI), center beam candlepower, dimming capabilities, RGBW availability, Luxor compatibility, and minimum rated life. The materials used for the fixtures include die-cast C360 brass faceplate with powder coated A380 aluminum housing. The socket contains MoistureBlockTM technology to prevent moisture from wicking up into sealed areas of the fixture. The lamp is an integrated module with Cree LEDs, gold- plated connectors, and conformal coated for maximum reliability and corrosion resistance. The on-board intelligent driver uses firmware-controlled temperature regulation to maximize LED life. The fixtures require a remote transformer (to be specified separately) and are designed for recessed installation in the upward direction only. The ground wash option is approved for driveover according to IEC 60598-1 requirements. The LED Well Lights come with a 10-year limited warranty and are available with wildlife-friendly amber LEDs in the ZD 3LEDT option.
The fixtures are manufactured in a facility certified with ISO 9001:2015 standards. The faceplate is made of die-cast C360 brass with designed features for protection, glare control, walkway illumination, or optimal beam pattern. Aluminum faceplate is available on select models.
Product Usage Instructions
- Choose the desired type of LED Well Light: Ring (RG), Cowling (CW), Wash (GW), or Louver (LV).
- Ensure you have a remote transformer with an input voltage range of 10-15VAC/VDC 50/60Hz.
- Select the appropriate output based on your lighting needs: 1LED, 3LED, 3LEDT, 6LED, 9LED, or ZDC-integrated LEDs.
- Install the fixture in a recessed position, facing upward.
- Make sure the ground wash option is installed according to the requirements listed in IEC 60598-1 if using it for driveover purposes.
- If dimming is desired, use a trailing-edge, phase-cut dimmer for optimal performance.
- Refer to the color temperature filters to achieve the desired lighting effect.
- For Luxor compatibility, follow the specified zoning options for each type of LED Well Light.
- Ensure that the fixture is properly sealed to prevent moisture ingress using the MoistureBlockTM technology in the socket.
- Replace the integrated module with Cree LEDs if needed. The LEDs have a rated life of 55,000 hours.
- Contact customer support if any issues arise within the 10-year limited warranty period.
For more information, visit the website: https://fxl.com or contact +1 760.744.5240.
OVERVIEW
- PROJECT
- CATALOG #
- TYPE
- NOTES
DESIGNER PREMIUM
Cylindrical in-grade fixture with versatile faceplate options in 1, 3, 6, or 9 LED. An RGBW version is also available for use with Luxor® system.
Quick Facts
- Die-cast brass or aluminum construction
- Two-layer marine-grade anodization and powder coat finish
- Cree® integrated LEDs
- Tamper-resistant features
- Color temperature filters
- Compatible with Luxor technology
- Phase and PWM dimmable
- Input voltage: 10-15V
- Information not available for Flood or Wide Flood.
- For optimal performance, use a trailing-edge, phase-cut dimmer.
- Measured using the Ring (RG) faceplate. Multipliers for other faceplates include: 0.60 (Cowling), 0.33 (Louver), 0.16 (Ground Wash).
- Measured using the 3,900K CCT lens. Multipliers for other CCTs include 0.80 (2,700K), 0.65 (4,500K), and 0.65 (5,200K).
FX Luminaire
FX Luminaire is an industry-leading manufacturer of landscape and
architectural lighting products with a focus on the advancement of LED
technology and digital lighting control with zoning, dimming, and color
adjustment capabilities. We offer a full spectrum of specification-driven
lighting fixtures that can be utilized to create elegant, cutting-edge
landscape lighting systems for commercial or residential applications. Our
products are available exclusively via our extensive professional distributor
network.
Materials
Die-cast C360 brass faceplate with powder coated A380 aluminum housing. Black
oxide stainless steel set screws and PBT construction sleeve.
Wiring
18 AWG (1 mm); SPT-1W; 220°F (105°C); 300V; 10′ (3 m) length
Weight
2.4 lbs. (1.1 kg)
Ambient Operating Temperature
0°F to 140°F (-18°C to 60°C)
Socket
Socket contains MoistureBlock™ technology, preventing moisture from wicking up
into sealed areas of the fixture.
Lamp
Integrated module with Cree LEDs. Gold-plated connectors and conformal coated
for maximum reliability and corrosion resistance. Proprietary on-board
intelligent driver uses firmware-controlled temperature regulation, maximizing
LED life. Field upgradeable and replaceable, the LEDs are rated to 55,000 hrs.
Maximum drive current: 1 A.
Power
Input 10-15VAC/VDC 50/60Hz. Remote transformer required (specify separately).
Housing
Die-cast A380 aluminum housing with capacity for 1LED, 3LED, 6LED, 9LED, or
ZDC integrated LEDs.
Installation Requirements
Designed for recessed installation in the upward direction only.
Optics
Polycarbonate color temperature adjustment lenses included with fixture:
2,700K (preinstalled), 3,900K (no lens), 4,500K, and 5,200K. Interchangeable
optics for 10°, 20°, 30°-32°, or 55-58° distributions ordered preassembled to
fixture. Color temperature and beam angle lenses field serviceable. Photometry
is calculated using LM-79 method for SSL luminaires. Drive-over Ground wash
option approved for drive- over according to the requirements listed in IEC
60598-1 up to 1,125 lbs. (510 kg).
Warranty
10-year limited warranty
Wildlife-Friendly Lighting
Available with wildlife-friendly amber LEDs. ZD 3LEDT option only.
Manufacturing
9001:2015 ISO certified facility
Faceplate
Die-cast C360 brass faceplate with designed features for protection, glare
control, walkway illumination, or optimal beam pattern. Aluminum faceplate on
selecte models only.
Lens
RG, CW, or LV: Tempered glass lens with shock resistance and high tolerance
for thermal expansion and stress. GW: Frosted polycarbonate lens with high
tolerance for thermal expansion, stress, and abuse. ABS light shields mask
specified quadrants of light in 90° increments between 90° and 360°.
Finish
Options of natural copper/brass finish, antiqued finish with brushed (Antique
Bronze) or tumbled (Antique Tumbled) effect, or TGIC powder coat finish.
Antique finishes sealed with a clear TGIC powder coat layer. Brass accent
pieces remain natural (not powder coated) for Bronze, Silver, Black, and Flat
White finishes.
Hardware
Includes six black oxide stainless steel faceplate screws and two gold tamper-
resistant wood screws to secure housing to construction sleeve.
Control
ZD and ZDC options utilize Luxor technology to zone light fixtures in up to
250 groups, dim each group in 1% increments between 0 and 100%, or change to
one of 30,000 colors with RGBW LEDs. Select the ZD option for zoning/dimming
or ZDC for zoning/dimming/color. Standard fixture is zoneable with Luxor.
Sustainability
Innovation meets conservation in the design and manufacturing of our products.
Where we can, we use recycled materials while maintaining superior
functionality. Our LED products provide high-quality light at optimal energy
efficiency, lifespan, and durability.
International Compliance Compliant per IEC 60598-1 and IEC 60598-2-7 by selecting the “e” version in parts builder. Listings
Well Light ORDERING INFORMATION
FC 1LED Illuminance at a Distance| RG/CW/LV| | FC 3LED Illuminance at a
Distance| RG/CW/LV
---|---|---|---|---
Feet (Meters) Center Beam| Beam Width| | Feet (Meters) Center Beam|
Beam Width
Foot-Candle (Lux)| Vertical 19.5º| | Foot-Candle (Lux)| Vertical 18.6º
4′ (1.2 m) 19 fc (206 lx)| 1′ (0.4 m)| | 4′ (1.2 m) 52
fc (560 lx)| 1′ (0.4 m)
8′ (2.4 m) 5 fc (52 lx)| 3′ (0.9 m)| | 8′ (2.4 m)
13 fc (140 lx)| 3′ (0.8 m)
12′ (3.7 m) 2 fc (23 lx)| 4′ (1.3 m)| | 12′ (3.7 m)
6 fc (62 lx)| 4′ (1.2 m)
16′ (4.9 m) 1.2 fc (13 lx)| 6′ (1.7 m)| | 16′ (4.9 m)
3 fc (34 lx)| 5′ (1.6 m)
20′ (6.1 m) 0.8 fc (9 lx)| 7′ (2.1 m)| | 20′ (6.1 m)
2 fc (22 lx)| 7′ (2.0 m)
24′ (7.3 m) 0.5 fc (5 lx)| 8′ (2.5 m)| | 24′ (7.3 m)
1.4 fc (15 lx)| 8′ (2.4 m)
FC 3LEDT Illuminance at a Distance| RG/CW/LV| | FC 6LED Illuminance at a
Distance| RG/CW/LV
---|---|---|---|---
Feet (Meters) Center Beam| Beam Width| | Feet (Meters) Center Beam|
Beam Width
Foot-Candle (Lux)| Vertical 21.1º| | Foot-Candle (Lux)| Vertical 21.1º
4′ (1.2 m) 38 fc (412 lx)| 2′ (0.5 m)| | 4′ (1.2 m)
77 fc (835 lx)| 2′ (0.5 m)
8′ (2.4 m) 10 fc (103 lx)| 3′ (0.9 m)| | 8′ (2.4 m)
19 fc (209 lx)| 3′ (0.9 m)
12′ (3.7 m) 4 fc (46 lx)| 5′ (1.4 m)| | 12′ (3.7 m)
9 fc (93 lx)| 5′ (1.4 m)
16′ (4.9 m) 2 fc (26 lx)| 6′ (1.8 m)| | 16′ (4.9 m)
5 fc (53 lx)| 6′ (1.8 m)
20′ (6.1 m) 1.5 fc (16 lx)| 7′ (2.3 m)| | 20′ (6.1 m)
3 fc (33 lx)| 7′ (2.3 m)
24′ (7.3 m) 1.1 fc (12 lx)| 9′ (2.7 m)| | 24′ (7.3 m)
2 fc (24 lx)| 9′ (2.7 m)
FC 9LED Illuminance at a Distance| RG/CW/LV| | FC ZDC Illuminance at a
Distance| RG (CW/LV
---|---|---|---|---
Feet (Meters) Center Beam| Beam Width| | Feet (Meters) Center Beam|
Beam Width
Foot-Candle (Lux)| Vertical 21.4º| | Foot-Candle (Lux)| Vertical 43.2º
4′ (1.2 m) 100 fc (1,071 lx)| 2′ (0.5 m)| | 4′ (1.2 m)
18 fc (191 lx)| 3′ (1.0 m)
8′ (2.4 m) 25 fc (269 lx)| 3′ (0.9 m)| | 8′ (2.4 m)
4 fc (47 lx)| 6′ (1.9 m)
12′ (3.7 m) 11 fc (120 lx)| 5′ (1.4 m)| | 12′ (3.7 m)
2 fc (22 lx)| 10′ (2.9 m)
16′ (4.9 m) 6 fc (67 lx)| 6′ (1.8 m)| | 16′ (4.9 m)
1 fc (12 lx)| 13′ (3.9 m)
20′ (6.1 m) 4 fc (43 lx)| 7′ (2.3 m)| | 20′ (6.1 m)
1 fc (8 lx)| 16′ (4.8 m)
24′ (7.3 m) 3 fc (30 lx)| 9′ (2.7 m)| | 24′ (7.3 m)
0.5 fc (5 lx)| 19′ (5.8 m)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>