FX Luminaire PO-ZD-1LED-WW-BZ LED Wall Light Owner’s Manual
- June 1, 2024
- FX Luminaire
Table of Contents
FX Luminaire PO-ZD-1LED-WW-BZ LED Wall Light
DESIGNER PREMIUM
1 LED recessed wall light available in four brass faceplate styles for any application.
Quick Facts
- Die-cast brass or aluminum
- Natural, powder-coated, or antique brass
- Cree® integrated LEDs
- Color temperature filters
- Compatible with Luxor® technology
- Phase and PWM dimmable
- Input voltage: 10-15V
SPECIFICATIONS
| Output | 1LED |
|---|---|
| Total Lumens†‡ | 4–39 |
| Input Voltage | 10 to 15V |
| Input Power (W) | 2.0 |
| VA | 2.4 |
| Efficacy (Lumens/Watt) | 8 |
| Color Rendering Index (CRI) | 80+ |
| Max Candela‡ | 24 |
| Dimming | PWM, Phase** |
| RGBW Available | No |
Luxor Compatibility
Default| Zoning
ZD Option| Zoning/Dimming
ZDC Option| —
Minimum Rated Life (L90/B10)| 55,000 Hrs
† Measured using the 3,900K CCT lens. Multipliers for other CCTs include 0.80
(2,700K), 0.65 (4,500K), and 0.65 (5,200K).
‡ Measured using the Round (RD) faceplate. Multipliers for other faceplates
include: 1.0 (Square), 2.0 (Spot), and 0.4 (Wall Wash).
** For optimal performance, use a trailing-edge, phase-cut dimmer.
FX Luminaire
FX Luminaire is an industry leading manufacturer of landscape and
architectural lighting products with a focus on the advancement of LED
technology and digital lighting control with zoning, dimming, and color
adjustment capabilities. We offer a full spectrum of specification-driven
lighting fixtures that can be utilized to create elegant, cutting-edge
landscape lighting systems for commercial or residential applications. Our
products are available exclusively via our extensive professional distributor
network.
Materials
Die-cast C360 brass faceplate, A380 aluminum housing, ABS construction conduit
sleeve.
Socket
Socket contains MoistureBlock™ technology, preventing moisture from wicking up
into sealed areas of the fixture.
Lamp
Integrated module with Cree LEDs. Gold-plated connectors and conformal coated
for maximum reliability and corrosion resistance. Proprietary on-board
intelligent driver uses firmware-controlled temperature regulation, maximizing
LED life. Field upgradeable and replaceable, the LEDs are rated to 50,000 hrs.
Maximum drive current : 1 A.
Optics
Polycarbonate color temperature adjustment lenses included with fixture:
2,700K (pre-installed); 3,900K (no lens); 4,500K; and 5,200K. Color
temperature lenses field serviceable. Beam angle is calculated using LM-79
method for SSL luminaires.
Wiring
18 AWG (1 mm); SPT-1W; 220°F (105°C); 300V; 10′ (3 m) length.
Power
Input 10–15 VAC/VDC, 50/60 Hz. Remote transformer required (specify
separately).
Housing
Die-cast aluminum housing with capacity for 1LED integrated LEDs.
Faceplate
Die-cast brass faceplate.
Lens
Tempered glass lens with shock resistance and high tolerance for thermal
expansion and stress.
Finish
Options of natural brass finish, antique finish with brushed (Antique Bronze)
or tumbled (Antique Tumbled) effect, or TGIC powder-coat finish. Antique
finishes sealed with a clear TGIC powder-coat layer.
Hardware
Includes ABS conduit sleeve with ½”-14 (13 mm) NPT female hole for strain
relief. Strain relief specified separately. Outer diameter of ABS conduit
sleeve: 1.9″ (48 mm).
Ambient Operating Temperature
0°F to 140°F (-18°C to 60°C)
Weight
2.3 lbs. (1.0 kg)
Control
ZD option utilizes Luxor technology to zone light fixtures in up to 250
groups, dim each group in 1% increments between 0% and 100%.
International Compliance
Compliant per IEC 60598-1 and IEC 60598-2-7 when used with International Wall
Kit (“EKITWALL”).
Sustainability
Innovation meets conservation in the design and manufacturing of our
products. Where we can, we use recycled materials while maintaining superior
functionality. Our LED products provide high quality light at optimal energy
efficiency, lifespan, and durability.
IES Classification
Type IV (RD & SQ), Type V (ST) Type II (WW).
Warranty
10-year limited warranty
Installation Requirements
RD & SQ – Designed for recessed installation in a vertical wall in the down
lighting position only.
WW – Designed for recessed installation in a vertical wall in any orientation.
ST – Designed for recessed installation in a vertical or horizontal wall; ensure substantial drainage flow for up lighting (e.g., decking).
**Listings
**
ORDERING INFORMATION
Fixture| Luxor Option| Output| Faceplate| Finish|
---|---|---|---|---|---
PO*| [default] Zone| 1LED 4–39 Lumens| RD Round| BS Natural Brass|
| ZD Zone/Dim| | SQ Square| BZ Bronze Metallic|
| ST Spot| DG Desert Granite|
WW Wall Wash| WI Weathered Iron|
| SB Sedona Brown|
FB Black|
WG White Gloss|
FW Flat White|
AL Almond|
SV Silver|
NP Nickel Plate|
AB Antique Bronze|
AT Antique Tumbled|
EXAMPLE FIXTURE CONFIGURATION:
PO-ZD–1LED–RD–BZ
*Includes 1.5″ (38 mm) Conduit Sleeve (25001859000) 
ACCESSORIES: Specify Separately
Accessories| Code|
---|---|---
PO MOUNTING BRACKET 1.3″ H x 2.5″ W (33 mm x 64 mm)| POBRKT|
STANDARD OPTICS KIT| 1LEDOPTICSKIT|
WALL LIGHT CONNECTION KIT| EKITWALL|
PHOTOMETRICS
| PO 1LED Illuminance at a Distance | RD/SQ |
|---|---|
| Feet (Meters) | Center Beam |
| Foot-Candle (Lux) | Vertical 35º |
| 2.0′ (0.6 m) | 0.2 fc (2.2 lx) |
| 4.0′ (1.2 m) | 0.1 fc (1.1 lx) |
| 6.0′ (1.8 m) | 0.02 fc (0.2 lx |
| 8.0′ (2.4 m) | 0.01 fc (0.1 lx) |
| 10.0′ (3.1 m) | 0.01 fc (0.1 lx) |
| PO 1LED Illuminance at a Distance | ST |
| --- | --- |
| Feet (Meters) | Center Beam |
| Foot-Candle (Lux) | Vertical 80º |
| 2.0′ (0.6 m) | 6.1 fc (66 lx) |
| 4.0′ (1.2 m) | 1.5 fc (16.4 lx) |
| 6.0′ (1.8 m) | 0.7 fc (7.3 lx) |
| 8.0′ (2.4 m) | 0.4 fc (4.1 lx) |
| 10.0′ (3.1 m) | 0.24 fc (2.6 lx) |
| PO 1LED Illuminance at a Distance | WW |
| --- | --- |
| Feet (Meters) | Center Beam |
| Foot-Candle (Lux) | Vertical 45º |
| 2.0′ (0.6 m) | 0.9 fc (9.5 lx) |
| 4.0′ (1.2 m) | 0.2 fc (2.4 lx) |
| 6.0′ (1.8 m) | 0.1 fc (1.1 lx) |
| 8.0′ (2.4 m) | 0.1 fc (0.5 lx) |
| 10.0′ (3.1 m) | 0.04 fc (0.4 lx) |
Customer Support
Cree is a registered trademark of Cree Inc. MoistureBlock is a trademark of
DSM&T Co. Inc.
© 2020 Hunter Industries™. Hunter, FX Luminaire, and all related logos are
trademarks of Hunter Industries, registered in the U.S. and other countries.
Learn more. Visit fxl.com | +1 760.744.5240
