LOFTNESS 95CFISUV4 Cool Flow Auxiliary Hydraulic Cooler Owner’s Manual
- September 28, 2024
- LOFTNESS
Table of Contents
LOFTNESS 95CFISUV4 Cool Flow Auxiliary Hydraulic Cooler
FEATURES
- Single-Fan Model Includes 16-Inch-Diameter Cooling Fan and 95,000 BTUs/Hr. Capacity for Mid-Frame Skid Steers
- Twin-Fan Model Includes Two 14-Inch-Diameter Cooling Fans and Industry-Leading 150,000 BTUs/Hr. Capacity
- 12 Volt Heavy-Duty Fan Speed Controller
- Rugged Roof-Mounted Design
- Automatic Thermostatically Controlled On/Off Switch
- Easy-Cleaning Screens
- Built-In By-Pass Protection Allows Reverse Hyd. Flow
- Aluminum Brazed Core
- Continuous Cooling of Entire Hydraulic System
- Less Vibration & Back Pressure Than Head-Mounted
- 10-60 GPM Flow Capacity
- Stays on Skid-Steer for Use With Any Attachment
- Cold Weather By-Pass for Start-Up
- Heavy-Duty Construction & Screens
GENERAL COOLER INSTALLATION INFO
- The Loftness cooler and protective box are designed to be used where more hydraulic cooling is needed in mobile equipment.
- The oil cooler consists of the oil cooler/protective box, oil cooler core, electric fan(s), fan controller, by-pass check valve, temperature sensor, wire harness, inlet and outlet ports, slide-out screen, removable top and mounting feet.
- The oil cooler draws air in from the bottom and blows it out the top.
- Generally, the cab roof is the best place to mount the cooler. Alternative locations might be behind the operator’s cab or on top of a forestry package where the unit is shielded.
- Hydraulic hoses are not included. Hydraulic adapters to make the hydraulic connections to your machine are not included. Power unit designs vary, which make the fittings and hoses unique to each machine type.
- Generally, the auxiliary cooler is plumbed into the existing hydraulic system in series with the existing cooler. There are two main hoses needed to reach from the auxiliary cooler to the existing cooler, along with various adapter fittings. The recommended plumbing procedures are given in more detail in the operator’s manual.
- We also recommend that you check with the manufacturer of your power unit regarding mounting and plumbing procedures.
SPECIFICATIONS
Single Fan | Twin Fan | ||
---|---|---|---|
Cooling Capacity | 95,000 BTU/Hour | 150,000 BTU/Hour | |
Max Inlet Pressure | 250 PSI | ||
Max Inlet Flow | 10-37.9 GPM | 38-60 GPM | |
Electrical System | 12 Volt DC | ||
Dimensions (Width x Length x Height) | 29.5″ x 36.75″ x 12.75″ | 34″ x 44″ x 14″ | |
Weight | 223 lbs | 334 lbs | |
Inlet & Outlet Port | 16 Male JIC | ||
60 PSI By-Pass Check Valve (For Cold Start-up) |
PRODUCT CODE
Circle/select 1 item from each group in the proper size/model column and product code column.
GROUP| Circle/select 1 item from each group in the proper size/model column and product code column.| PRODUCT
CODE
| |
---|---|---|---|---
1
| MODEL
Generic Cooler Kit (Single Fan)| 95CFISUV4| $5,604|
Generic Cooler Kit (Twin Fan)| 15CFISUV6| | $7,994
2
| Mount
Takeuchi Mount – TL12-V2/R2| 201883| N/A| $650
Kubota Mount – SVL75/90/95/97-2| 212512| $900| $900
Kubota Mount – SVL75-3| 212431| $900| N/A
John Deere Mount – 325G / 331G / 333G (For Serial # 307152 and Up)|
212610| N/A| $950
Adjustable Leg Kit| 206362| $250| $250
3
| Hose Kits
Takeuchi Hose Kit – TL12-V2/R2| N49247| N/A| $270
Kubota Hose Kit – SVL95/97-2| N49253| $390| $390
Kubota Hose Kit – SVL75-3| 212609| $450| N/A
John Deere Hose Kit – 331G / 333G (For Serial # 307152 and Up)| 209047|
N/A| $470
Generic Cooler Kits include cooler, protective box and generic mounting feet.
Model specific mounting hardware/brackets or hoses are not included with
generic kit. Various hoses and adapter fittings will be needed to install and
are NOT included. Some welding or drilling may be required. See operator’s
manual for more install information or call the factory.
(800)828-7624 / (320)848-6266
LOFTNESS.COM
USD – FOB Factory
Uncrated (Prices Effective 1/1/24 (Subject to Change)
650 South Main Street
Hector, MN 55342.