Lyfreen BF002 Bird Feeder with Camera User Manual

**Lyfreen BF002 Bird Feeder with Camera User Manual

**

FREQUENTLY ASKED QUESTIONS

Q: Should | must register before use the App?

A:Yes, both Phone number and E-mail address are workable for register. For Apple phone, the Apple ID can login in directly. The account only used to identify the code. We ensure to protect your private data.

Q: How to install the App?

A: 1. Please scan the QR code on the color box or instruction manual to download the App 2.For Android system, please go to Google Play and input “Bird Lover” to search the App then download. For I0S system, please go to App Store and input “Bird Lover Feeder” to search the App then download

Q: The workable phone operation system for this App.

A:i0S=2V10.0 version, Android=V5.0 version.

Q: How to connect the camera with the App?

A:Please push the reset button and hold for 5 seconds. To make sure the red light flash rapidly. Then open the App and add the device under the App guiding step by step.

Q:Does the camera support 5G WiFi signal?

A:No, at present, only 2.4Ghz WiFi signal is workable.

Q: How many account can connect this Smart Bird Feeder?

A:Only one account can connect the Smart Bird Feeder. If the device have been occupied by other account, but you don’t know whom, please contact your directly seller to help you deal with it.

Q: How to share the device with others?

A:lmportant: Every one who wants to be shared or use this Smart Bird Feeder, the one should install this “Bird Lover” App. And you have below methods to share the device: 1.Share the device by add other's App account name. 2.Add others account to your family group 3.Give your account name and code for others to loginin.

Q:What's the language of the App?

:The App language is sync to your phone system language. So you don't worry about you will don't understand the App language. Only the Al recognition result is English and Chinese dual languages.

Q:Why the camera battery is drain so fast?

Altis low power consumption camera. Plus the solar panel power incharge, it can maintains the daily energy consume in sunny day. If the battery drain too fast you should check 1. If you check the camera with App too often? 2. If the camera always wake up due to too many birds visiting? 3. If the WiFi performance is good or not? Once the camera lost WiFi or WiFiis too weak, the camera will scouring the WiFi signal again and again, till the power used up.

A1, Please confirm you have input the TF card or purchased the | cloud storage. 2. Please make sure if you have allowed the “Recording Settings.”

Q:How to turn on or turn off the message notify?

A: 1. Enter the main page find “Me

Q: Why the Identified result is wron

A:Theresult accuracy depends on the angle and clarity of the bird pictures. To ensure get a correct result please ensure the picture is clear enough. The identify features (bird’s head, tail wings or pattern on feathers are not covered by obstacles. The bird should occupies the main position of the picture. Try to capture the best moment to recognize the bird if the previous recognition accuracy rate is too low. If there are two or more bird species in one picture the identified result will be the one on the main position

Schematic: The best angle for identification

WHAT’S IN THE BOX

• Bird feeder

• Bird feeder bracket

• Bird Stand

• Bracket connector

• Long screw*3
  

• Anchors

• Screws for wall *4

• Pin

• Waterproof rubber

• Short screw*2

• Micro-USB Charging cable

BIRD FEEDER STRUCTURE

BIRD FEEDER SPECIFICATION

SOLAR PANEL SPECIFICATION
IPCE| 19%
Working voltage(Vmp)| 6V5%
Working current(Imp)| 400mA+5%
Open Circuit Voltage(VOC)| 7.2V45%
Short-circut current (1SC)| 480mA5%

CAMERA STRUCTURE

1. Status LED
2. Infrared LED
3. Microphone
4. Motion sensor
5. Light sensor
6. Lens
7. Mounting hole
8. Speaker
9. Power ON/OFF
10. Sync/Reset
11. Charging port
12. TF card slot

CAMERA SPECIFICATION

Power supply: DC5V2A
Power Consumption: 2W Watts (Max.)
Standby current: <500uA
Battery life: 4-6 months
Battery capacity: 5200mAh
Pixel: 2 megapixel 1080P
Viewing angle: 130°
Night visual range: 8m(Max)
Wireless connection: 2.4GHz WIi-FiIEEE802.11 b/g/n;
Anti-flicker: 50HZ 60HZ
Operating temperature:   -20.5°C ~ 48.5°C
Operating humidity: 10% ~ 95% non-condensing

STATUS LED

1. Boot up : Red light always ON.
2. Waiting for network setting: Red light fast blinking.
3. Network connecting Green light fast blinking.
4. Network connected: Green light always ON.
5. Abnormal status: Red light slow blinking.
6. During firmware upgrade: Yellow light always ON.
7. Charging status: White light always ON during charging/Turn OFF after fully charged.

READ BEFORE INSTALLATION

1. Keep the bird feeder and all accessories out of reach of children and pets
2. Make sure the camera has been fully charge .(DC 5V/2A)
3. Working temperature :-5°F to 120°F(-20.5°C t0 48.5°C)
4. Working relative humidity: 10%~95%
5. Please do not expose the camera lens to direct sunlight
6. The camera has an IP65 waterproof rating, which support working properly under rains or snows. But it can not be soaked in water.

NOTE

1. The bird feeder can only works with 2.4GHz WI-FI
2. Strong lights may interfere with the device’s ability to scan QR code.
3. Avoid placing the device behind furniture or near microwaves products
4. Try to keep the bird feeder within range of your WI-FI signal

INSTALL BIRD FEEDER

The firs installation effect.

1. Use the provided drilling template to mark the position of holes on your wall. Use drill bit to drill 4 holes.
   

2. Install 4 Anchors.
   

3. Install the screws to fix the bracket
   

4. As shown in the picture, put the Bracket connector into the bottom of the bracket, and find 3 long screws to install it, and the bird feeder is fixed.
   

5. After opening the lid and adding the bird food. As shown in the picture, fastening the 2 Short screws can prevent it from being opened by squirrels.
   

INSTALL BIRD FEEDER

The second installation effect.

1. Need to unscrew 4 sets of screws from the Bird feeder wall mount and putthem aside.

2. Put plastic accessories on the back, Re-tighten the four sets of screws.
   

3. Use the provided drilling template to mark the position of holes on your wall. Use drill bit to drill 4 holes.
   

4. Install 4 Anchors.
   

5. Install the screws to fix the bracket.
   

6. .As shown in the picture, put the Bracket connector into the bottom of the bracket, and find 3 long screws to install it, and the bird feeder is fixed.
   

7. After opening the lid and adding the bird food. As shown in the picture, fastening the 2 container lid Short screws can prevent it from being opened by squirrels.
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>