JADE BIRD ME201Aeye-P4 Smart Vision Aid User Guide
- June 6, 2024
- JADE BIRD
Table of Contents
Aeye-P4 Smart Vision Aid
User Guide
Dear Aeye-P4 users
Thank you for choosing Jadebird Vision Aye-P4 For your convenience, please read the instructions carefully and follow the steps in the steps Please keep the manual properly. Please contact us if you have any problem.
Visit Jadebird Vision website
www.jadebirdvision.com Get more
information
Product list
Package Components
Buttons and interface
Instruction
How to open
- Place the vision aid flat on the table as shown and assemble the wide-angle lens by screwing it clockwise if you want to use it.
- Press down on the bottom panel A with one hand and push up the screen panel B by 90° with the other hand.
- Pull up the screen panel B by hand to a comfortable visual angle and access the distance camera (if available).
Charging
Plug the adapter into a power outlet Insert the rounded end into the DC port of the vision aid
Note :
- Use the original adaptor to charge the visual aid
- When connected to the adapter, both the LED lights battery and the visual aid battery will be charged at the same time
- Do not use the distance camera port (Type-C) to charge the vision aid
*This indicator is for the LED lights battery level only, please refer to the screen display for the battery level of the visual aid.
- Power on: Sleeping mode, LED lights tower on Press and hold the power button for 2 seconds to start the system
- Power off: Press and hold the power button for 2 seconds, the system will prompt whether to shut down the system, select confirm, the system will shut down
- Sleeping mode: In the power-on state, press the power button or fold the visual aid, the visual aid system automatically enters the screen sleeping mode
- LED lights: by toggling the LED lights switch, you can turn on and adjust the brightness of the LED light with three brightness adjustments
Distance camera (not standard)
- Plug the US8A end of the distance camera power cable Into the adapter
- Plug the Type-C end of the distance camera cable into the distance camera port.
- Turn on the switch of the distance camera to use.
Note: It is recommended to turn off the distance camera when the screen is on Sleeping mode to reduce the standby power consumption of the visual aid.
Usage Scenarios
Close up viewing camera mode: desktop reading/writing
‘Close up viewing camera mode mainly for desktop book reading writing with up
to 20x magnification of text content
Distance camera mode: blackboard viewing
‘Distance camera mode can be used for viewing blackboard information, with its
powerful optical zoom function allowing graphic information from up to 10
meters away to be displayed clearly on the screen. ‘Steps to use: first of
all, you can adjust to the best field of view by optical zoom, and then adjust
the content of the image by digital magnification.
Distance camera mode: desktop reading/writing ‘The use of a distance camera allows for better desktop reading/writing with a larger field of view and maneuverability. The distance camera angle can be adjusted in conjunction with the image rotation function in distance camera mode for optimum use.
Dual screen mode: blackboard viewing, desktop reading/writing
‘Dual screen mode for simultaneous reading of blackboard and desktop book
information
Specification
screen type: LCD
Screen size: 10.1″ FHD
Screen resolution: 1920*1200
Battery capacity of the vision aid: 3.7V/6000mAh Battery life of the vision
aid: 3 hours
(The battery life varies greatly under different modes, so the data is for
reference only)
Charging time for the vision aid: 3.5 hours (switched off) LED lights battery
type: 18650 lithium-ion batteryLED lights battery capacity: 5200mAh
LED lights battery life: weak (30 hours) medium (25 hours) strong (20 hours)
| ROM: Nand Flash 64GB
Close up viewing camera: 13.0 MP
Distance camera (not standard): optical zoom WIFI: WIFI 802.11a/b/g/n-Ac
Bluetooth: BT 4.2
Earphone Port: 3.5mm standard earphone port Power adapter: Input: 110V-220V 50Hz/60Hz Output: DC 5.5V/3A
Magnification: close up viewing camera mode: 1-20x
---|---
Safety Notification
- Jaybird Vision makes no claims about the suitability of the Aye-P4 for any particular event.
- Use of non-original equipment, accessories, or software may cause unforeseen functional problems• resulting in damage to the product, which may result in personal Injury to you or others.
The product uses lithium batteries, please do not disassemble the equipment, do not expose the batteries to hot, humid or corrosive environments.
- Do not expose products and accessories to rain, high humidity, dust, or other airborne contaminants.
- Do not expose the product and accessories to excessive temperatures (over 602C) (e.g. hairdryers. microwave ovens or strong direct sunlight).
- Do not use this product in areas where the radio equipment is prohibited, or request authorization for use from the relevant area
.Turn off the power when you stop using the product.
- The product will generate some heat during normal operation, please give the product enough space to dissipate heat, if the product is too hot, please tum off the machine and suspend it for a period of time before use.
- Initial use of the product requires a certain amount of time for training, so please take it to step by step to improve your proficiency.
- IF you feel tired or uncomfortable, please take a break.
- Do not heat, open, puncture, damage, or repair any battery, and do not allow liquid to come into contact with skin or eyes when a battery leak; if contact occurs, flush the affected area with plenty of water and seek medical attention immediately.
- Do not put the product in liquid or flush with liquid.
- Do not over-bend, knot, or damage the data cable or charging cable.
- IF you notice strange smells or sounds from products and accessories, please stop using them immediately and contact Jadebird Vision as soon as possible.
‘This product emits electromagnetic waves that may affect nearby electronic devices, including pacemakers, hearing aids. defibrillators.
- If you are using a pacemaker or other implanted medical device, please consult your doctor or device manufacturer before using this prcduct.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: ·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver. ·Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. ·Consult the dealer or an experienced radio/TV
technician for help. Caution: Any changes or modifications to this device not
explicitly approved by the manufacturer could void your authority to operate
this equipment. This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RF Exposure Information This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 25mm between the radiator
and your body.
JADEBIRD VISION
Copyright © Jadebird Vision 2021. All rights reserved. This material is for informational purposes only and does not constitute a commitment of any kind. Please refer to the actual product (including but not limited to color, size, etc.). The company reserves the right to change product data without prior notice.