ROBENS 690166 Lighthouse Rechargeable Lantern Instruction Manual

June 17, 2024
ROBENS

ROBENS-690166-Lighthouse-Rechargeable-Lantern-
product

ROBENS 690166 Lighthouse Rechargeable Lantern

ROBENS-690166-Lighthouse-Rechargeable-Lantern-product

Product Information

Specifications:

  • Input: 5V, 1A
  • Output: 5V, 1A
  • Battery: 3.7V, 4000 mAh Li-Ion
  • Light Source: 12W LED
  • Class: 3 appliance

Product Usage Instructions:

Components:

  1. Hanger
  2. Removable lampshade
  3. Hook
  4. Button and power indicator
  5. USB power output
  6. Micro USB power input

Light Modes:

  • Press the button for warm light (700 Lm)
  • Press the button twice for cool light (300 Lm)
  • Press the button three times for warm and cool together (1000 Lm)
  • Press the button four times for flashing mode
  • In the first three modes, press and hold the button to dim the light

Disassembly and Disposal Instructions:

  1. Remove lampshade by rotating it counterclockwise
  2. Remove clear lens covering light source PCB by prying back tabs
  3. Unscrew screws holding light source PCB in place
  4. Cut wires to remove required components for testing
  5. Dispose of battery according to local regulations after removing it
  6. Cut wires to remove charge port electronics on circuit board and dispose of them according to local regulations
  7. Dispose of remaining components according to local regulations

FAQs:

  • Q: How do I charge the lantern?
    A: To charge the lantern, use the Micro USB power input with a compatible charging cable.

  • Q: Can I replace the LED light source?
    A: The LED light source and control gear are not replaceable to maintain the product’s construction integrity and longevity.

LIGHTHOUSE RECHARGEABLE LANTERN
MODEL: 690166 / ZY-CL502R

INSTRUCTION MANUAL

INSTRUCTIONS FOR USE

  1. Hanger
  2. Removeable lampshade
  3. Hook
  4. Button and power indicator
  5. USB power output
  6. Micro USB power input

ROBENS-690166-Lighthouse-Rechargeable-Lantern- \(1\)

LIGHT MODES

  • Press the button for warm light (700 Lm)
  • Press the button twice for cool light (300 Lm)
  • Press the button three times for warm and cool together (1000 Lm)
  • Press the button four times for flashing mode

In the first three modes, press and hold the button to dim the light

USE OF THE LAMP

  • Lamp is charged using 5V DC USB power outlet. Micro USB input (6.) is located under protective lid Charging cable is included with the lamp
  • Lamp have built in overcharge protection circuit
  • When charging the power indicator lights red. When fully charged it lights green
  • When power is low the indicator will light red
  • Please fully charge the lamp before use
  • Lamp can also be used as power bank to charge phones etc. USB output (5.) is located under protective lid Lamp can be used hanging from the hanger, standing, or hanging from the hook
  • To remove the lampshade, rotate it counterclockwise from the body of the lamp
  • Lamp can be cleaned with water and a damp rag
  • Lamp is water resistant to IP44
  • Do not use corrosive liquids to clean the lamp
  • Do not stare into the light source
  • Do not modify the product

LIGHT SOURCE: 12W LED

Light source and control gear is not replaceable.
This would introduce weak points in the construction, that could reduce the lifetime of the product.

INSTRUCTION FOR DISASSEMBLING AND DISPOSAL WHEN THE PRODUCT HAS REACHED

THE END OF ITS USABLE LIFE

  1. Remove lamp shade by hand, rotating it counterclockwise

  2. Remove clear lens covering light source PCB, by using a flathead screwdriver to pry back 3 pcs tabs holding it in place

  3. Unscrew screws holding light source PCB in place

  4. Cut needed wires to remove the required components for testing

  5. Remove battery compartment lid, by rotating it counterclockwise

  6. Remove 2 pcs screws to remove the inner battery lid

  7. Cut wires to allow removal of battery. Dispose of battery according to local regulations

  8. Cut wires to allow removal of charge port electronics on circuit board.
    Dispose of electronics according to local regulations

  9. Dispose of remaining components according to local regulations

TECHNICAL DATA:

  • 3.7V , 12W
  • Input : 5V , 1A
  • Output: 5V , 1A
  • Battery: 3.7V , 4000 mAh Li-Ion

Class 3 appliance

Robens® is a reg. trademark of Oase Outdoors
EU: Kornvej 9, DK-7323 Give, Denmark, UK: One Glass Wharf, Bristol, BS2 0ZX

ROBENS.DE

© 11/2023 Oase Outdoors. Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals