Jumbo ABS Bluetooth VR Joystick Installation Guide

 ABS Bluetooth VR Joystick

BLUETOOTH VR JOYSTICK INSTRUCTIONS FOR USE
Material: ABS
10Keys
Bluetooth range: 10m
Battery voltage: 1.5V
Switch system (Android and 10S)
Turn on:

• if the battery already had been put inside,please long press the switch key
• if had not put the battery inside before using, it will be turn not after you put the battery inside

Connecting:
Please turn on your Bluetooth of smart phone or tablet, search “i-JMB K-207Z” and then connect Please choose the system, Android or lOS Take the picture:
Open your camera of phone, press “D” or “C” for take the picture: press the “R”’B’ for exit
Play the song:
First, please change the model to music mode, press the “@+A”(usually, the product in music model when it turn on)
Rocker: Turn right-next song; Turn left-previous song
“C”: tum up the volume
“D”: turn down the volume
“A” &”L”: stop/resume playing
“B”: back to home page
Gaming model:
Press the keys “@+B” change to gaming model and please horizontal operation
Rocker: turn upesquat; turn down dump; tum righteright move
B/C-hand
A/D-foot
Lemenu
P-stop the game
**** (Different using for different game)

CAUTION BATTERY:

1. Non-rechargeable batteries are not to be recharged
2. Never mix different types of batteries
3. Empty batteries are to be removed from the item. Do not mix them with the new ones.
4. Never short-circuit the contacts. Follow the battery polarity indications.
5. Change the batteries if they do not work properly or they have leak.
6. Never put the batteries near the fire or heat sources, nor throw them into the fire.
7. Please wash immediately if the skin or clothes touched the liquid from the battery.
8. Changing of batteries to be done by adults. Keep away from children,
9. In case of swallowing seek medical attention immediately!

HEREBY, THE MANUFACTURER(Guangzhou WESDAR Electronic Technology Co.,Ltd) DECLARES THAT (item no: K-207Z, BLUETOOTH JOYSTICK) COMPLIES WITH THE ESSENTIAL REQUIREMENTS AND OTHER RELEVANT PROVISIONS OF DIRECTIVE 2014/53/EU.

WARRANTY OF WIRELESS ELECTRONIC DEVICES  SOLD BY «JUMBO SA”

1. The “JUMBO SA TRADING COMPANY” (head office: Moshato Attiki, 9 Cyprus & Hydra) (hereinafter “The Company”) makes every effort to ensure its products meet the standards of suitability and safety of domestic and Community legislation.

2. In wireless electronic devices which fall within the radio equipment marketing (e.g. H/PC mouse, headphones, bell, etc.) through the stores of the Company, it is provided warranty period of one (1) year  from the date of purchase of the product, resulting from the purchase document (receipt or invoice),

3. In case of manufacturing fault, found on inspection by the authorised department of the Company during the scheduled procedures, the product will be replaced with the same or with another of the same specifications or refunded.

4. In any case, the consumer has all the rights provided by the regulations in force and more specifically the regulations of sale agreements.

5. The above warranty does not cover damage caused by:
   a.Incorrect, inappropriate or contrary to the product instructions, installation, use, maintenance or storage of the product.
   b.Voltage power drop, conditions of incorrect operation or product exposure to inappropriate and unsuitable environmental conditions.
   c.Natural events, accidental or force majeure events, external influences and interventions of all kinds of the buyer or a third part and / or non=specialized and authorized person.
   d.Normal wear of the product due to intended use,

6. The Company has no responsibility for any injury and / or property damage (direct or consequential) that may occur from damage or fault of the product caused by any of the abovementioned events.

Guangzhou WESDAR Electronic Technology Co., Ltd DECLARATION OF CONFORMITY
We
Guangzhou WESDAR Electronic Technology Co., Ltd No.
6 XiaoQian East Road XinWei Village XinTang Town Zengcheng District Guangzhou,China
Declare under our responsibility that the product
K-207Z BLUETOOTH JOYSTICK
Is in conformity and has passed successfully testing relevant with the RED DIRECTIVE 2014/53/EU(Radio Equipment Directive)

Essential Requirement| Applied Specifications/Standards| Documentary Evidence| Resit
---|---|---|---
SAFETY| EN 60950-1:2006+A11:2009+ A1:2010+Al2:2011+A2:2013| AGC06563170701ES01| PASS
EMC| EN 301 489-1 V2.20(2017-03) EN 301 489-17 V3.2.0(2017-03)| AGC06563170701EE01| PASS
Radio| EN 300 328 V2.1.1(2016-11)| AGC06563170701EE04| PASS
Health| EN62479:2010| AGC06563170701EH02| PASS

Date :2017-09-12
Name : Celine
Position: Sales Manager
Stamp and signature :

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>