SPY SHOP EUROPE COM H.264-1080P Remote Wireless Camera Instruction Manual
- June 4, 2024
- SPY SHOP EUROPE COM
Table of Contents
SPY SHOP EUROPE COM H.264-1080P Remote Wireless Camera Instruction Manual
Thank you for having chosen this product. This camera adopts a unique ultra- portable design, which enables it to be applied in various fields and brings you convenient, safe and colorful daily life. Please follow the steps in the instructions to set up your camera correctly.
- Press the ON/OFF key to turn on the camera. Press the ON/OFF key for 3 seconds to turn it off.
(When the camera is on, you may press Reset for 5 seconds to restart the camera for factory settings)
Mode represented by key indicator
Red light is power indicator, which is always on when the power is on.
Blue light is WIFI indicator.
Specific mode is as follows:
- Point-to-point mode: Blue light flashes slowly
- Configuration of remote camera completed: Blue light is always on If you are not clear what mode it is, reset the camera and switch to point-to-point mode.
Note: This reset works only when the blue light is always on or flashes slowly. Press the Reset key for about 5 seconds until the indicators all go out, and let go until the camera starts (about 30 seconds).
Download APP software
-
Method 1. Scan the QR code (Figure 1), and enter the download page
(Figure 2). Choose to download the software according to the system
of the mobile phone. Download and install the computer client through the download address http://lookcam.ffvv.xyz:8800/lookcam_download.html
-
Method 2. For Android, search for APP software called LOOKCAM on Google Play, and download and install it.
For Apple, search for APP software called LOOKCAM in App Store, and download and install it.
Note: If you scan with WeChat, when (Figure 2) appears, click the browser in sharing in the upper right corner to open and download the software. After downloading and installing, the following icon appears on the mobile phone
Point-to-point connection of mobile phone to camera
Enter the mobile phone WI-FI settings, find the WiFi account (UID number) and
connect. As shown in the figure
After the UID of the device is connected, open the phone APP (LOOKCAM). (As
shown below)
Click Cancel point-to-point short-range viewing (point-to-point is connected
and viewing allowed) and click Yes to fast pair router and enter remote
viewing (If you need to set up remote, please continue to read the
instructions and follow the steps)
Set up the camera remote
When point-to-point video can be viewed, return to the previous level and enter the interface as shown in the figure.
Click the setup icon → Advanced Configuration →WiFi Connection Configuration →
Find WiFi → Enter Password → Click OK and the camera will restart
automatically. (Wait for the camera to restart (about 40 seconds). The camera
will change from offline to online, at which time the viewable video can be
accessed remotely.)
Note: When connecting to remote, make sure you enter the correct WIFI password. Otherwise, the camera will restart automatically after clicking OK. However, due to the wrong password, the camera will not be online, and then you need to reset it and re-pair.
| Resolution Ratio | 1080P/720P/640P/320P |
|---|---|
| Video Format | AVI |
| Frame Number | 25 |
| Visual Angle | 150 /90 degree |
Motion Detection Camera
Shooting| Straight line 6 meters
Minimal Illumination| 1LUX
Video Duration| Over 1 Hours
Compressed Format| H.264
Recording Range| 5m’
Consumption| 380MA/3.7V
Storage Temperature| -20-80 degree centigrade
Operating Temperature| -10-60 degree centigrade
Operation Humidity| 15-85%RH
Memory Card Type| TF card
Player Software| VLCPlayer/SMPlayer
Computer Operating
System| Windows/Mac OS X
Mobile Phone Operating
System| Android/i0S
Web browser| 1E7 and above,chrome,firefox safari.etc
Largest customer| 4
Specifications and parameters
Reminder: What Micro SD Card is required for recording? Why can’t I use
my Micro SD Card for recording? The camera supports up to 128 GB Micro SD
card. Please use High Speed Class 10 FAT formatted memory card. You must
format the Micro SD before using. If SD card is not recognized when inserted
into camera, just remove and re-insert.
Why can’t the camera go online?
-
Powerless.
-
Check if your router is working properly or not.
-
Weak Wi-Fi signal.
-
Wrong password wrong while Wi-Fi setting
Why is remote monitoring not smooth?
You should choose a suitable resolution to watch according to your internet speed.
Why I can’t save to my SD card?
SD Card must be formatted if this is your first time to use it. How do I when I forgot my password? Press reset key for 10 seconds and restore the factory setting. -
The initial password for each camera is 123456. Please change the password to ensure the security of your camera.
-
If the camera cannot be connected to the router, please reset, and connect the hot spots before completing the configuration.
Contact Us
Beling d.o.o.
Franje tandeka 23B
51000 Rijeka, Croatia
VAT No. HR 80249393012
Tel. +385 51 673 400
Fax. +385 51 671 542
Mail: info@spyshopeurope.com
sales@spyshopeurope.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>