XtremeMac XWH-ALM-13 Multi Connection Mouse User Guide
- June 6, 2024
- XtremeMac
Table of Contents
**XtremeMac XWH-ALM-13 Multi Connection Mouse User Guide
**
Product Overview
A. left Click
B. Right Click
C. Scrol1Wheel
D. DPI Button
E. Micro Charging Port
F. USB Connection Indicator Light
H. Type-C Connection Indicator Light
I. Mode Switch Button
J. On / Off Button
K. Type-C Receiver
L. USB Receiver
M. Battery Indicator Light
HOW TO CHARGE YOUR MOUSE
When the battery of your mouse is low, the battery indicator light will flash red. Use the included USB cable to charge your mouse. When charging the battery indicator light will turn red and will turn off when its fully charged.
HOW TO CONNECT YOUR MOUSE
To connect your mouse with USB receiver
- Turn on your mouse.
- Press the mode switch button until the USB conncetion indicator light turns red.
- Open the battery cover and take out the USB receiver.
- Insert the USB receiver into your computer and your mouse will connect automatically.
To connect your mouse with Tyner. receiver
- Turn on your mouse.
- Press the mode switch button until the Type-C conncetion indicator light turns green.
- Open the battery cover and take out the Type-C receiver.
- Insert the Type-C receiver into your computer or smartphone and your mouse will connect automatically.
To connect your motive with Bluetooth:
- Turn on your mouse.
- Press the mode switch button until the bkuetooth indicator light turns blue.
- Long press the mode switch button for 5 seconds until the bluetooth indicator light flashes blue.
- Open the bluetooth settings on your computer or smartphone and select ‘XWH-ALM-13* to pair.
SPECIFICATIONS
Lmon Battery: 300mAh
OPI: 1000-1600-2400
Dimensions: 110.07 x 59.91 x 31.35 mm
Weight: 82.5g
bluetooth technology: 4.0
Working distance: 10m
Voltage: 3.7V
Working current: 4mA
Maximum radiofrequency power:
Frequency Bands:
Compatiblity: Windows8, Windows10 Mac OS X 10.10 or higher, Android 4.3
or higher 2.4GHz wireless
Working distance: 20m
Voltage: 3.7V
Working current: 5.5mA
Maximum radiofrequency power: OdbM
Frequency Bands: 2402MHz – 2480MHz
Compatibility: Windows XP Windows], Windows8, Windowsl0, Mac OS X 10.10
or higher
Warning
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>