MODify Kit 02 Gondol Modular Merchandising System Instructions

MODify Kit 02 Gondol Modular Merchandising System

Specifications

• Dimensions: 76.5W x 96H x 28.5D (1943.1mm x 2438.4mm x 723.9mm)
• Approximate Weight: 104 lbs (47.1736 kg)
• Shipping Dimensions: 85L x 14H x 24D (2159mm x 355.6mm x 609.6mm)
• Approximate Shipping Weight: 177 lbs (80.2858 kg)
• Graphic Material: Dye-sublimated fabric

Product Information

The MODify Gondola Kit 02 is a part of the MODify Modular Merchandising System, featuring interchangeable fixtures and accessories that allow for easy assembly, disassembly, and rearrangement to create various display configurations. This kit includes five frames with silicone-edge graphics that can be customized with branded graphics and optional accessories like shelves or hang bars.

MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Gondola Kit 02 is composed of five frames adorned with high-quality silicone-edge graphics. This versatile display can be tailored to your brand’s unique aesthetic with custom printed graphics, and you can also enhance its functionality by incorporating optional shelves or hang bars.

Features and Benefits

• Base Kit includes: Towel bars, U bars
• Optional Accessories Include: Faceout bars, Shelves

Product Usage Instructions

How to Apply & Remove Graphics

Installation: Push the SEG bead into each corner of the frame with your thumb, then push the SEG bead into the middle of the run and work your way around the perimeter until all beading is secure. Ensure beading is properly pushed into the extrusion profile.

Removal: Use the pull tab on the graphic and gently pull it from the frame, going around the perimeter.

Graphics Storage & Care

Graphics should be folded with the graphic facing inward and stored in a sealable plastic bag. Spot clean with a damp white cloth or machine wash on a gentle cycle with cool water. Line dry flat.

features and benefits

Base Kit includes

• Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
• Heavy-duty aluminum frame, steel base
• Steel, slotted uprights
• Five frames: two ends, two center, one header
• Two, 35W” sections in center hold SEG push-fit fabric graphics on both sides
• End caps each hold a 28”W x 81””H SEG push-fit fabric graphic, black liners on inside
• Frame topper with 59”W x 12”H SEG push-fit graphic, one on each side
• Non-rolling base
• Display is easy to assemble and install
• Lifetime hardware warranty against manufacturer defects.

Optional Accessories Include

• Towel bars.
• Faceout bars
• U bars
• Shelves

dimensions

Hardware

Assembled unit

• 76.5”W x 96”H x 28.5”D
• 1943.1mm(w) x 2438.4mm(h) x 723.9mm(d)
• Approximate Weight:
• 104 lbs / 47.1736 kg

Shipping

Packing case(s):

• 1 Box

Shipping dimensions:

• (85″L x 14″H x 24″D)
• 2159mm(l) x 355.6mm(h) x 609.6mm(d)
• Approximate shipping weight:
• 177 lbs / 80.2858 kg

additional information

MODify Accessories

Tools Required

How to Apply & Remove Graphics

Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.]

Graphics Storage & Care

Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

Kit Hardware BOM

Kit Graphics BOM

FAQ

Q: Are additional accessories available for the MODify Gondola Kit 02?

A: Yes, additional accessories such as towel bars, face out bars, U bars, and shelves are available to enhance the functionality of the display.

Q: What tools are required for assembly?

A: The assembly requires a multi-hex key (included), a Phillips screwdriver (not included), and a 9/16 socket wrench (not included).

References

• The Exhibitors' Handbook

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>