MODify GN-K-03 Gondola Display Pros User Manual
- June 17, 2024
- MODify
Table of Contents
MODify Gondola Kit 03
GN-K-03 Gondola Display Pros
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of
interchangeable fixtures and accessories that can be easily assembled,
disassembled, and rearranged to create a variety of different display
configurations. The MODify system incorporates SEG push-fit fabric graphics
that enable you to brand, promote and merchandise with ease.
MODify Gondola Kit 03 features three frames (center, side, and header) that
all include SEG push-fit printed graphics. With its rolling base, this display
is versatile and can be placed almost anywhere. Enhance and MODify by
incorporating optional shelves or hang bars to showcase merchandise.
We are
continually improving and modifying our product range and reserve the right to
vary the specifi cations without prior notice. All dimensions and weights
quoted are approximate and we accept no responsibility for variance. E&OE. See
Graphic Templates for graphic bleed specifications
features and benefits:
Base Kit includes:
- Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
- Heavy-duty aluminum frame, steel base
- Steel, slotted uprights
- Three frames: side, center, one header
- Center section holds 35.5”W x 57”H SEG push-fit fabric graphic, one on each side
- End cap includes a 37”w x 57”H SEG push-fit fabric graphic and black liner on inside
- Rolling base (casters included)
- Display is easy to assemble and install
- Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
| – Towel bars. | – U bars |
|---|---|
| – Faceout bars | – Shelves |
dimensions:
| Hardware | Shipping |
|---|
Assembled unit:
39”W x 61.5”H x 37.5”D990.6mm(w) x 1562.1mm(h) x 952.5mm(d)
Approximate Weight: 87 lbs / 39.4625 kg| Packing case(s):1 Box
Shipping dimensions:(62″L x 14″H x 24″D)1574.8mm(l) x 355.6mm(h) x 609.6mm(d)
Approximate shipping weight:145 lbs / 65.7709 kg
Graphics
Graphic material: Dye-sublimated fabric
See graphic templates for graphic sizes.
https://www.theexhibitorshandbook.com/downloads/download-graphic-templates
or Refer to related graphic templates for more information Visit: click here
additional information:
Tools Required
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1- 4) with your
thumb, then push the SEG bead into the middle of the run (5-8) and work your
way around the perimeter of the frame until all beading is pushed in properly;
if necessary, go around the perimeter again to ensure beading is secure in the
extrusion profile. 
Note: Keep the set up area clean by
using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic
from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip
lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If
washing is necessary, use a commercial size front-loading washing machine,
gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to
prevent shrinkage.
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 2 |  | 3/8-16 |
x 2.5-3″L bolt
1| 1435MM (56.50in) OF 832 DOUBLE SIDED UPRIGHT OPEN EXTRUSION
1| 1435MM (56.50in) OF 833 ) RIGHT UPRIGHT
2| 2.5″ Caster, no brake and 5/16″ threaded post x 1.4″ length
1| 947MM (37.28IN) RIGHT SUPPORT LEG
2| 2.5″ Caster, with brake and 5/16″ threaded post x 1.4″ length.
1| 947MM (37.28IN) LEFT SUPPORT LEG
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 2 | 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS | |
| 1 | 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION | |
| 1 | 7MM SEG PLASTIC END CAP FOR 832 EXTRUSION |
NOTE: BOTTOM CROSS BRACE SITS ON TOP INSIDEEDGE OF LEFT AND RIGHT SUPPORT
LEG
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 2 | (39.26 w X 60.59 h total size ) 35.26 w X 56.59 h finish size, Dye-sub |
print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 1 | 943MM (37.13in) LENGTH OF WMFCD EXTRUSION |
45 DEGREE MITER CUT BOTH ENDS WITH SIDE
BRACKET
1| | 943MM (37.13in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS
2| | 1439MM (56.65in) LENGTH OF WMFCD EXTRUSION
45 DEGREE MITER CUT BOTH ENDS
4| | SINGLE VECTOR CORNER CLEAT
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 1 | (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish size, Unprinted |
5oz. Black Soft Knit, sewn with silicone beading around perimeter & pull tab in bottom right corner
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 1 | SIDE BRACKET | |
| 4 | MFY-BOLT-8-32-0.75 | |
| 1 | (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish size, Dye-sub |
print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 2 | 883MM (34.76in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS | |
| 4 | SINGLE VECTOR CORNER CLEAT | |
| 2 | 305MM (12.01in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS | |
| 2 | 1/4″-20 x 13″L bolt |
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 2 | (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish size, Dye-sub |
print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone
beading around perimeter & pull tab in bottom right corner
2| | 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN
Kit Hardware BOM
| ITEM | COMPONENTS | QTY | DESCRIPTION |
|---|
|
306-305-15-15| 2| 305MM (12.01in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER
CUT BOTH ENDS
306-883-15-15| 2| 883MM (34.76in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER
CUT BOTH ENDS
306-943-15-15| 1| 943MM (37.13in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER
CUT BOTH ENDS WITH SIDE BRACKET
306-943-15-15| 1| 943MM (37.13in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER
CUT BOTH ENDS
306-1439-15-15| 2| 1439MM (56.65in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER
CUT BOTH ENDS
824-947| 1| 947MM (37.28IN) RIGHT SUPPORT LEG
824-947| 1| 947MM (37.28IN) LEFT SUPPORT LEG
832-1435| 1| 1435MM (56.50in) OF 832 DOUBLE SIDED UPRIGHT OPEN EXTRUSION
832-EC| 1| 7MM SEG PLASTIC END CAP FOR 832 EXTRUSION
833-1435| 1| 1435MM (56.50in) OF 833 ) RIGHT UPRIGHT
833-EC| 1| 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION
835-883-01-01| 2| 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM
LOCKS BOTH ENDS
MFY-BOLT-.25-20-1| 2| 1/4″-20 x 13″L bolt
MFY-BOLT-8-32-0.75| 4| MFY-BOLT-8-32-0.75
MFY-BOLT-375-16-2.5| 2| 3/8-16 x 2.5-3″L bolt
MFY-CSTR-L| 2| 2.5″ Caster, with brake and 5/16″ threaded post x 1.4″ length.
MFY-CSTR-NL| 2| 2.5″ Caster, no brake and 5/16″ threaded post x 1.4″ length
MFY-DB-36-17| 2| 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN
SIDE BRACRET| 1| SIDE BRACKET
VF-CC| 8| SINGLE VECTOR CORNER CLEAT
Kit Graphics BOM
| MFY-GN-03-A-G| 1| (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner
---|---|---|---
MFY-GN-03-B-G| 1| (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish
size, Unprinted 5oz. Black Soft Knit, sewn with silicone beading around
perimeter & pull tab in bottom right corner
MFY-GN-03-C-G| 1| (39.26 w X 60.59 h total size ) 35.26 w X 56.59 h finish
size Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″
NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
MFY-GN-03-D-G| 1| (39.26 w X 60.59 h total size ) 35.26 w X 56.59 h finish
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″
NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
MFY-GN-03-E-G| 1| (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner
MFY-GN-03-F-G| 1| (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish
size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2
silicone beading around perimeter & pull tab in bottom right corner