MOUNTUP MU9132 Universal Speaker Stands Pair Instruction Manual
- May 15, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU9132 Universal Speaker Stands Pair
Product Specifications
- Weight Capacity: 10kg/22lbs
- Material: Wooden pallet
- Product Dimensions:
- Height: 31″ (785mm)
- Width: 1.8″ (46mm)
- Depth: 0.86″ (22mm)
Product Usage Instructions
Safety Caution
Before assembly, ensure all components and hardware are included and undamaged. Read the manual carefully before installation. Keep small parts away from children under 3 years old. Do not exceed the weight capacity or misuse the product to prevent injury.
FAQ
- Q: Can this stand to be used outdoors?
- A: No, this product is intended for indoor use only to prevent product failure and personal injury.
- Q: What is the weight capacity of this speaker stand?
- A: The weight capacity is 10kg/22lbs.
If you have any questions, please feel free to contact our customer support before returning.
Wight
Safety Caution
BEFORE ASSEMBLY
- Layout all components and hardware. Check all parts are included and undamaged.
- Should anybody intend to install or use this mount, please read and understand this manual carefully.
- If you do not understand these instructions or have any doubt about the safety instructions, assembly or use of this product, please contact our customer service.
WARNING
- This product contains small items that could be a choking hazard if swallowed.
- KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
- Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use.
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of the monitor or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
PACKAGE CONTENTS
Hardware
Hardware for stand assembly
Installation Instructions
STEP 1: Install the base foot pad
Choose rubber feet or carpet nails according to your floor type.
- Option One: If the stand is placed on wooden, cement, tile or other hard floor, install the foot pad (H) and adjust it to level if the base is not level.
- Option Two: If the stand is placed on the carpet, install the carpet (I) nails and adjust them to level if the base is not level.
STEP 2: Install the bottom tube
- Insert Bottom tube (3) into Base (2) then fasten Bolt M (C) by using Allen key (F).
- Insert Plastic cover (5) into Base (2).
STEP 3:Install the upper tube
- Insert Upper tube (4) into the bottom tube (3) then fasten Bolt (A) by using the Allen key (F).
STEP 4: Install the board
- Insert Board (1) onto Upper tube (4) then fasten Bolt (B) by using Allen key (F).
STEP 5: Install a non-slip mat
- Remove the film of the adhesive, and stick the non-slip mat (G) according to the size of the speaker.
STEP 6: Installing Speakers
- Insert the plug into the circular hole and pull it out from the hole under the base.
Product Dimensions
If you have any questions, please feel free to contact our customer support before returning.