BRESSER 9070300 Funkwetterstation Transparent Instruction Manual

: June 17, 2024
: BRESSER

BRESSER 9070300 Funkwetterstation Transparent

Specifications

Product Name: RC Weather Station Transparent
Languages: DE, EN, FR, NL, ES, IT
Power Source: Batteries (not included)
Battery Type: Micro-Batteries (1.5V, Typ AAA/LR03)

Product Information

The RC Weather Station Transparent is a multi-functional weather station that provides information on indoor temperature, humidity, and time. It consists of a display unit (Basisstation) and a wireless sensor for monitoring outdoor conditions. The station is equipped with various buttons for setting alarms, snooze functions, and channel selection.

Usage Instructions

Powering the Base Station:

Remove the battery compartment cover.
Insert four Micro-Batteries (1.5V, Typ AAA/LR03) into the battery compartment, ensuring correct polarity.
Replace the battery compartment cover.

Powering the Wireless Sensor:

Remove the battery compartment cover of the sensor.
Insert the required batteries with correct polarity.
Replace the battery compartment cover.

Connecting Wireless Sensors:

Remove the battery compartment cover of the sensor.
Place the sensor near the base station to establish a connection.
Replace the battery compartment cover.

Automatic Time Setting:
If the station receives the time signal successfully, date and time will be set automatically with a reception symbol displayed. If no signal is received, manual time setting is required.

Manual Time Setting:
In case the automatic time setting fails, you can manually set the date and time using the provided buttons on the station.

FAQ

How often should I replace the batteries?
Battery replacement frequency depends on usage but it’s recommended to replace them when low battery indicators appear on the display.
Can I use rechargeable batteries with the weather station?
It is recommended to use non-rechargeable Micro-Batteries (1.5V, Typ AAA/LR03) for optimal performance.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions. www.bresser.de/P9070300

BRESSER-9070300-Funkwetterstation-Transparent-FIG-2

WARRANTY
www.bresser.de/warranty_terms

Imprint

Bresser GmbH
Gutenbergstr. 2 46414 Rhede Germany
www.bresser.de
For any warranty claims or service inquiries, please refer tothe information on “Warranty” and “Service” in this documentation. We ask for your understanding that unsolicitedreturns cannot be processed.
Errors and technical changes excepted.
© 2023 Bresser GmbH
All rights reserved.
The reproduction of this documentation even in extracts in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission ofthe manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, theEuropean Union and/or other countries.
© National Geographic Partners LLC. All rights reserved. NATIONAL GEOGRAPHIC and Yellow Border Design aretrademarks of National Geographic Society, used under license.
Visit our website: www.nationalgeographic.com

Validity note

This documentation is valid for the products with the following article numbers:

9070300
Manual version: 1223
Manual designation:
Manual_9070300_Weather-Station_de-en-fr-nl-es-itNATGEO
v122023a
Always provide information when requesting service.

Features

Graphical 12-hours weather trend display
Radio-controlled clock with DCF signal reception and display
Alarm with snooze function
Outdoor temperature alarm (frost warning)
Outdoor temperature (in °C or °F)
Indoor temperature (in °C or °F)
Relative humidity (indoor) in %
Highest and lowest value display
Up to 3 thermo remote sensors connectable (1 snsor included)
Control elements on the backside
Semi-transparent display
Can be placed on a flat surface

About this Instruction Manual

NOTICE
These operating instructions are to be considered a component of the device.

Read the safety instructions and the instruction manual carefully before using this device.
Keep these instruction manual in a safe place for future reference. If the device is sold or passed on, the instruction manual must be passed on to any subsequent owner/user of the product.

General safety instructions

DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
This product contains small parts that can be swallowed by children! Choking hazard!

DANGER
Risk of an electric shock!

This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.
Never leave children unattended when handling the device! Follow the instructions carefully and do not attempt to power this device with anything other than power sources recommended in this instruction manual, otherwise there is a danger of an electric shock!

DANGER Explosion hazard!

Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.
Do not expose the device to high temperatures. Use only the recommended batteries. Do not shortcircuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a shortcircuit, a fire or an explosion!

NOTICE
Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
Do not immerse the unit in water!
Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive humidity. This can result in malfunctions, shortcircuits or damage to the batteries and components.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or types or with different capacities. Remove batteries from the device if it is not to be used for a longer period of time!

NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

Parts overview and scope of delivery

BRESSER-9070300-Funkwetterstation-Transparent-FIG-4

Display (base station)
Base
[SNZ] button (snooze function)
[CH] button (channel selection)
[ALARM] button (alarm setting)
[DOWN] button (value setting downwards)
[UP] button (value setting upwards)
[SET] button (basic settings)
Battery compartment cover (base station)
Battery compartment (base station)
Display (wireless sensor) 12 Function indicator
Battery compartment cover (wireless sensor)
Wall mount hole
Battery compartment (wireless sensor)
[°C/°F] button
Slide switch for channel selection

Scope of delivery:

Base unit (A), wireless sensor (B)
Required batteries (not included):
4 pcs. micro batteries (1.5V, type AAA/LR03)

Screen display

BRESSER-9070300-Funkwetterstation-Transparent-FIG-5

AM/PM information in 12-hour time mode
Standard: Current time; Alarm: Alarm time
Symbol for active alarm
Symbol for active time zone
Symbol for active daylight savingtime (DST)
Current date
Graphical weather trend display
Symbol for radio signal
Battery level indicator (Base station)
Indoor humidity information
Indoor humidity value
Indoor temperature information
Indoor temperature value
Battery level indicator (Remote sensor)
Outdoor temperature value
Channel cycle
Selected channel for remote sensor
Outdoor temperature information
Symbol when snooze function is activated
Battery level indicator (Remote sensor)
Symbol for radio signal
Outdoor temperature value
Selected transmission channel
Highest (MAX) or lowest (MIN) Value (Outdoor)
Highest (MAX) or lowest (MIN)
Symbol for temperature alarm(highest or lowest value)

Setting up power supply

Base station

Remove the battery compartment cover.
Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
Replace the battery compartment cover.
Wait until the indoor temperature is displayed on the base station.

Remote sensor

Remove the battery compartment cover.
Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
Push the CH button to set the desired transmission channel (setting CH1, CH2, CH3 or channel cycle) (onscreen display).
Push the °C/°F button to set the desired temperature format (setting °C or °F on screen display).
Replace the battery compartment cover.

Connecting remote sensors

The weather station can display the readings from up to 3 wireless sensors* of the same type. Each wireless sensor must be set to a separate channel. Proceed as follows to set the channel.

Remove the battery compartment cover of the wireless sensor.
Slide the channel selection slide switch to the position for the desired channel (1, 2 or 3). If only one sensor is used, we recommend channel 1.
Reattach the battery compartment cover.
Press the [CH] button on the base station several times to display the measured values for the individual channels. The selected channel is shown in the display.
Press [CH] button for about 3 seconds to reset the values and search for a wireless sensor (RF signal).
*one wireless sensor included, more optionally available

Automatic time setting

After the power has been restored, the unit automatically searches for the radio signal. It takes approximately 38 minutes for this process to be completed.
If the radio signal is received correctly, the date and time are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:
1. Press the UP button for approx. 2 seconds to initiate the reception of the radio signal again.
2. Press the UP button for approx. 2 seconds to initiate the reception of the radio signal again.
3. If still no radio signal is received, the time must be set manually.

Manual time setting

Press and hold SET button for approx. 2 seconds to change to time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next setting.
Settings order: Year > Month > Day > Time zone > 12/24 hour mode > Hours > Minutes
Finally press the SET button to save the settings and exit the setting mode.

Time zone setting

If this weather station is to be used in an area where the UTC time standard is used (e.g. parts of the UK and Portugal), the time zone can be set manually to 1h UTC. To do this, follow the next steps.

Press and hold the SET button for about 2 seconds to switch to time setting mode.
The year digits flash.
Sequence of settings: Year > Month > Day > Time zone > 12/24 hour mode > Hours > Minutes.
Press the SET button until the time zone setting flashes.
Press the DOWN button to change the value to 1.
Press the SET button repeatedly until the time setting mode is completed.

Alarm setting

Press Press ALARM button to show the alarm time.
Press and hold ALARM button for approx. 2 seconds to change to alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press ALARM button to confirm and continue to the next setting.
Settings order: Hours > Minutes
Finally press the ALARM button to save the settings and exit the setting mode.
Press SET button to activate the alarm. The symbol will be displayed. The alarm is activated.
Press SET button again to disable the alarm. The symbol will not be displayed. The alarm is disabled.

Snooze function

When the alarm sounds, press SNZ button to activate the snooze function. The alarm will sound again in 5 minutes.
Press any other button when the alarm sounds to interrupt the alarm until the alarm time will be reached again.

Receiving measurements automatically

Once batteries are installed, the base station will display the measurement readings. Readings from the remote sensor will be displayed within 3 minutes after powering it on.

Manual measurement display

Press UP button several times to display the saved values one after another.
Display order: Current values > MAX (highest values) > MIN (lowest values)
Press UP button for approx. 2 seconds during highest or lowest value display to irrevocable delete all saved values.
NOTICE! Saved highest and lowest values will be deleted automatically every day on 0:00!

Weather trend

The weather station will calculate a weather trend for the next 12 hours on basis of the measured values. It will be displayed as follows:

BRESSER-9070300-Funkwetterstation-Transparent-FIG-6

Sunny
Partly cloudy
Cloudy
Rain

Temperature alarm setting

In normal time display mode, press DOWN button for approx. 2 seconds to enter temperature alarm time setting mode.
Digits to be set are flashing.
Settings order: ON/OFF (Temperature alarm on/off) > Temperature highest limit > Temperature lowest limit > Exit
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next setting.
The temperature settings mode will be quit automatically after 30 seconds of inactivity. All settings done before will be saved.
When outdoor temperature reaches highest or lowest limit, the temperature alarm symbol will flash and an alarm will sound for approx. 3 seonds. This will be repeated with an interval of 1 minute until the temperature has fallen below the limit again.
NOTICE! Select temperature alarm OFF from the temperature settings mode to disabled the temperature alarm permanently.

Disposal

Dispose of the packaging materials according to its type. Information on proper disposal can be obtained from the municipal waste disposal service provider or environmental agency.
Do not dispose of electronic devices in the household garbage!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.
Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return them after use either at our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.
Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

Technical data

Base station

Batteries 2x AAA, 1.5 V
Radio controlled signal DCF
Maximum number of sensors 3
Temperature unit °C/°F
Time display HH:MM
Time format 12 or 24 hours
Dimensions 140 x 105 x 50 mm (W x H x D)
Weight 117 g (without batteries)

Wireless sensor

Batteries 2x AAA, 1.5 V
Transmission frequency 433 MHz
Maximum RF power under 10mW
Temperature unit °C/°F
Dimensions 65 x 71 x 23 mm (W x H x D)
Weight 54 g (without batteries)

Warranty

The regular warranty period is 2 years and starts on the day of purchase. To benefit from an extended voluntary warranty period as indicated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.

CE declaration of conformity

Bresser GmbH hereby declares that the radio equipment type with item number 9070300 is in compliance with Directive 2014/53/EU. The full text of the CE Declaration of Conformity is available at the following web address: www.bresser.de/download/9070300/CE/9070300_CE.pdf