PROAIM TRK-4P 8ft Track Aluminum Pipe Kit Instruction Manual
- June 17, 2024
- PROAIM
Table of Contents
PROAIM TRK-4P 8ft Track Aluminum Pipe Kit
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
4x 4ft Portable Track Sections
-
Storage Bag
8ft Track Aluminum Pipe Kit Setup
-
Interconnect the portable track sections.
-
Loosen the long thumbscrews of the track ends (Not included), insert the track rails into them and lock the thumbscrews to secure the track into position.
-
Place the dolly platform (Not included) onto the track. The handles part of the dolly platform (Not included) should be inside the track as shown.
Note: Make sure all wheels are aligned correctly on the track, and the dolly runs smoothly
-
Loosen the knob of the break bracket (Not included), mount it on the side of the dolly platform (Not included) & tighten the knob.
Note: Adjust the position of the break bracket so it goes under the track to prevent the platform from tilting.
Note: Track can be used in lengths of 4ft and 8ft, depending on your shot
requirements. Polaris and Flymate Dolly (Not included) Compatible with Track
as shown in the picture.
YOUR PROAIM 8FT TRACK ALUMINUM PIPE KIT ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.