PROAIM VI-PP-01 Pro Camera Vibration Isolator Instruction Manual
- June 17, 2024
- PROAIM
Table of Contents
PROAIM VI-PP-01 Pro Camera Vibration Isolator
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved. No part of this document may be reproduced, stored in a
retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may
be expressly permitted by the applicable copyright statutes or in writing by
the Publisher.
Vibration Isolator Setup
Begin by taking out the mainframe from the case.
- Attach DJI-QR Ronin plate with top plate ofVibration Isolator with the provided screws& allen key.
NOTE : Attach Isolator with Proaim Airwave Vibration Isolator Arm then
secure with provided screws
- Loosen the side lock lever & insert your gimbal then again lock the lever to secure it. If ronin plate look loose then tighten the side allen bolt.
- NOTE : The isolator can be fixed both Over Slung and Under Slung, as per your requirement
Assembling with 3-10kg/6.6-22lb Payload
NOTE : Vibration Isolator can also be customized with different payloads for using with lightweight setups from 5-15kg / 11-33lb.
- Loosen allen bolts on top Plate with the help of allen key and remove the plate. Your equipment will look as shown in image.
- Loosen all allen bolts with help of provided allen key as shown in images.
- Remove the Passive Plate from the Frame as shown in the image.
- Turn the Isolator upside-down & loosen the bolts to remove Square-O-Rings from the Isolator.
- Now reduce the rings set in center of the Vibration Isolator as per your payload requirement. Then similarly follow the back steps to assemble the Vibration Isolator.
- There are many different holes at the top and bottom side of vibration isolator plate to mount different accessories.
- 1/4”-20 hole is for DJI-QR Ronin Plate
- M4 or M3 hole is for MOVI Mount Be sure to mount your Gimbal Camera Setup securely.
YOUR PROAIM PRO CAMERA VIBRATION ISOLATOR FOR GIMBALS,
ALL DRESSED UP AND READY TO GO!
Warranty : We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability : We are not liable for damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of
care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>