DUCO L0004088-A DoorVent Non Mechanical Ventilation Installation Guide
- June 17, 2024
- Duco
Table of Contents
DUCO L0004088-A DoorVent Non Mechanical Ventilation
Product Information
Specifications:
- Product Name: DoorVent
- Model Number: L0004088-A
- Manufacturing Date: 16/10/2023
- Opening Size: 417mm x 48mm
- Tolerance: 2mm on the size 48mm, 3mm on the size 417mm
Product Usage Instructions
Mounting Instructions:
- Place the template on the door and mark the opening to be cut, OR make an opening of 417mm x 48mm on the door.
- Apply a layer of super glue on the pins of the end pieces (marked in red on the drawing).
- Push the two identical halves together through the opening until the feed-through vent is in place.
FAQ
Q: What should I do if the opening size on my door does not match 417mm x
48mm?
A: If the opening size on your door does not match the specified
dimensions, please contact customer support for further assistance.
Q: Can I use any type of glue for mounting the DoorVent?
A: It is recommended to use superglue specifically for this product to
ensure proper adhesion and durability.
Mounting instructions DoorVent
- Place the template on the door and mark the opening to be cut. OR Make an opening in the door of 417mm x 48mm. There is a tolerance of 2mm on the size 48mm. There is a tolerance of 3mm on the size 417mm.
- A layer of superglue is placed on the pins of the end pieces (marked in red on the drawing).
- The two identical halves are pushed together through the opening. The feed-through vent is in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>