Pyle PDBC70 Surge Protector Owner’s Manual
- June 15, 2024
- Pyle
Table of Contents
Pyle PDBC70 Surge Protector
INTRODUCTION
Thank you for purchasing the PYLE series 1 U Rack Mount Power Supply Conditioner, and congratulations on your choice. The Power Supply Conditioners feature excellent surge protection for all your systems， and they supply multiple outlets for your powering equipment. It not only protects anything plugged into them from spikes and surges but also has a built-in AC noise filter to rid the system of radio frequency and electromagnetic interference. And this allows all your equipment to function better and last longer.
-
SAFETY INFORMATION:
To obtain the best results from our Power Supply Conditioner Unit, please read the manual carefully before using it. -
WARNINGS:
To reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltage is present inside the enclosure. Do not remove the covers. Refer servicing to qualified personnel only. -
CAUTION:
These equipment shall be connected to a 20 Ampere-rated receptacle of the branch circuit. The total current drawn from the receptacles of this equipment is 15 Amperes maximum, and no individual receptacle shall draw more than 12 Amperes.
IMPORTANT SAFETY GUIDELINES
- Please pay close attention to the important operating and maintenance instructions in this manual.
- Read the instructions.
- Keep and follow all the instructions. Heed all warnings.
- To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not use this apparatus near water.
- Clean the unit with a damp cloth only, Do not use solvents or abrasive cleaners. Never pour liquid on or into the unit.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses ( including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding–type plug. A polarized plug has two blades one wider than the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for the placement of the obsolete outlet.
- Route the power cord and other cables so that they are not likely to be walked on, tripped over, or stressed. Pay particular attention to the condition of the cords and cables at the plugs, and the point where the Power Supply Conditioners. To prevent the risk of fire or injury, damaged cords and cables should be replaced immediately.
- Unplug the unit during lightning storms or when unused for long periods of time
- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF
- Once installation and wiring is complete power on all your equipment with the volume and level controls DOWN. Once all the equipment is ON slowly raise the volume or level controls to their proper positions.
- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, brackets, and associated equipment for damage. Any missing corroded, deformed, or non-load-rated component could significantly reduce the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware that is rated for the loading condition of the installation and any possible short-term, unexpected over-loading. Never exceed the rating of the hardware or equipment.
- Consult a licensed, professional engineer regarding physical equipment installation. Ensure that all local state and national regulations regarding the safety and operation of equipment are understood and adhered to.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way. Such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FEATURES
PCO850 FEATURES:
- 1U Rack Mountable
- AC noise filtering to reduce radio frequency and electromagnetic interference
- Spike & surge protection ensures equipment stays safe and your power stays clean
- The “Protection OK＂indicator
- 8 real panel outlets, and one front panel convenience outlet
- 15 amp rating with circuit breaker, and push to reset function with current protection
PCBC50 FEATURES:
- 1U Rack Mountable
- Spike & surge protection ensures equipment stays safe and your power stays clean
- 6 real panel outlets, and with 3 front panel convenience outlet
- ON/OFF power supply switch
- 15 amp rating with circuit breaker, and push to reset function with current protection
PCBC70 FEATURES:
- 1U Rack Mountable
- Spike & surge protection ensures equipment stays safe and your power stays clean
- 9 separate LED ON/OFF power supply switches on the front panel
- 9 separate power supply outlets on the back panel
- 15 amp rating with circuit breaker, and push to reset function with current protection
Front & Real Features:
PCO850
PDBC50
PDBC70
Specifications
- Maximum Output Current: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 amps
- Line Cords: . . . . . . . . . . . . . . . . . . . . . Captive 6 foot cord, 3X14 AWG
- Operating Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120VAC 60Hz
- Energy Dissipation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 joules
- Peak Impulse Current: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12000 amps
- Operating Voltage: . . . . . . . . . . . . . . . . . . . . . . . . 115V/60Hz (PCO850) 115-230V/50-60Hz (PBBC50 & PDBC70)
- Machine Dimension:
- PCO850: . . . . . . . . . . . . . . . . . . . . . . . . . . 485( L) X 100( D) X45( H)MM
- PDBC50: . . . . . . . . . . . . . . . . . . . . . . . . . 485( L) X 100( D) X45( H)MM
- PDBC70: . . . . . . . . . . . . . . . . . . . . . . . 485( L) X 170( D) X 45( H)MM
- Machine Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- PCO850:1.6KG
- PDBC50:1.7KG
- PDBC70:2.5KG
- Construction(PCO850): . . . . . . . Aluminum Front Panel, Steel Chassis, Black painted
- Construction(PDBC50 & PDBC70):. . . Steel Front Panel, Steel Chassis, Black painted
718. 535. 1800 718. 236.2400 (fax) 1600 63rd Street, Brooklyn NY 11204
FREQUENTLY ASKED QUESTIONS
What is the brand of the surge protector with model number PDBC70, and how many total power outlets does it have?
The surge protector with model number PDBC70 is manufactured by Pyle, and it features a total of 9 power outlets.
What is the voltage rating of the Pyle PDBC70 Surge Protector?
The Pyle PDBC70 Surge Protector is rated for 120 Volts.
What special feature does the Pyle PDBC70 Surge Protector offer for added functionality?
The Pyle PDBC70 Surge Protector provides surge protection and is mountable for convenient installation.
What are the product dimensions of the Pyle PDBC70 Surge Protector?
The product dimensions of the Pyle PDBC70 Surge Protector are 19 x 6.5 x 1.75 inches.
How much does the Pyle PDBC70 Surge Protector weigh?
The Pyle PDBC70 Surge Protector weighs 5.04 pounds.
What level of surge protection does the Pyle PDBC70 Surge Protector offer in joules?
The Pyle PDBC70 Surge Protector features 150 joules of energy dissipation.
How does the Pyle PDBC70 Surge Protector protect equipment during voltage fluctuations or power outages?
The Pyle PDBC70 Surge Protector protects equipment by providing 1200 amp peak impulse current when voltage fluctuates, swells, or spikes during storms and power outages.
How many rear outlets does the Pyle PDBC70 Surge Protector have, and what can the front power switch be used for?
The Pyle PDBC70 Surge Protector is equipped with 9 rear outlets, and it has a front power switch that can be used to completely shut off electronics when not in use for power/energy saving.
What is the purpose of the built-in AC noise filters in the Pyle PDBC70 Surge Protector?
The built-in AC noise filters in the Pyle PDBC70 Surge Protector eliminate unwanted radio frequency (RFI) and electromagnetic interference (EMI) to improve equipment stability and prolong the service life of electronics at home or office.
How many individual power switches are present on the front panel of the Pyle PDBC70 Surge Protector, and what is their purpose?
The Pyle PDBC70 Surge Protector features 9 individual front panel power switches, providing a solution for controlling the power flow to any connected equipment.
What type of installation is the Pyle PDBC70 Surge Protector designed for, and what are the benefits of this design?
The Pyle PDBC70 Surge Protector is designed for 1U rack mount installation, offering hassle-free cable management.
What materials are used in the construction of the Pyle PDBC70 Surge Protector, and how durable is it?
The Pyle PDBC70 Surge Protector is made with a sturdy steel chassis and front panel, ensuring durability.
How long is the power cord of the Pyle PDBC70 Surge Protector, and what is its gauge?
The power cord of the Pyle PDBC70 Surge Protector is 6 feet long, and it is made of 3x14 AWG, capable of withstanding light tugging.
What is the intended purpose of the Pyle PDBC70 Surge Protector in terms of creating a mini-charging station?
The Pyle PDBC70 Surge Protector can convert any standard AC outlet into a mini-charging station for smartphones/laptops with bulky chargers.
Is there any warranty or replacement policy for the Pyle PDBC70 Surge Protector, and if so, what are the details?
Information about warranty or replacement policies for the Pyle PDBC70 Surge Protector is not provided in the given data. It's recommended to check the product documentation or contact the manufacturer for this information.
DOWNLOAD THE PDF LINK:Pyle PDBC70 Surge Protector Owner’s Manual
REFERENCE:Pyle PDBC70 Surge Protector Owner’s Manual- Device.Report