HOME DECORATORS COLLECTION HD0547F Sumner 2 Light Matte Black Outdoor Tiffany Flush Mount User Guide

Item # 1008 547 474
Model # HD0547F
USE AND CARE GUIDE
2-LIGHT OUTDOOR FLUSH MOUNT

HD0547F Sumner 2 Light Matte Black Outdoor Tiffany Flush Mount

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

• For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
• Before touching any wire, use a voltage tester to make sure it is not live.
• When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove the cartridge fuses with a fuse puller.
• Use tools with insulated handles and ladders made of wood or fiberglass.
• To protect children, place a safety cover over any unused outlets.

DANGER: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS. Please reference the model and item numbers.

Warranty

FIVE (5) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and  service. If this product is found to be defective, the manufacturer’s only obligation and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS.

Pre-Installation

PLANNING INSTALLATION

• Read all instructions before installing.
• To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460.
NOTE: This product requires two 60W maximum medium base (E26) type “A” or 9W maximum medium base (E26) self-ballasted LED bulb (sold separately).
TOOLS REQUIRED (NOT INCLUDED) HARDWARE INCLUDED
NOTE: Hardware is not shown to actual size.

PACKAGE CONTENTS

NOTE: A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil. For general cleaning of Tiffany shades, use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently. If a white powder appears on the soldered joints of the Tiffany shade, this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.

Installation

1. Installing the crossbar assembly
   • Secure the crossbar assembly (AA) to the outlet box (not included) with the outlet box screws (BB). Tighten until snug.
   • Remove the flat washer (1) and the coupling (2) from the crossbar assembly (AA) and keep the flat washer (1) and the coupling (2) for later use.
   NOTE: The preassembled mounting nipple on the crossbar should protrude outward.
   

2. Making the electrical connections

• Use wire connectors (CC) to connect the wires.
  • Ground Wire:
  • Wrap the supply ground wire around the green ground screw on the crossbar assembly (AA), no less than 2 in. from the end of the wire. Tighten the ground screw.
  Connect the fixture ground wire to the supply ground wire with a wire connector (CC).
  • Supply Wire:
  • Connect the supply white wire to the white fixture supply wire with a wire connector (CC).
  • Connect the supply black (or red) wire to the black fixture supply wire with a wire connector (CC).
  • Wrap each connection with approved electrical tape and carefully insert all of the connected wires into the outlet box.

  3. Attaching the fixture body to the outlet box
     • Attach the fixture body (A) and the flat washer (1) to the crossbar assembly (AA).
     • Secure with the previously removed coupling (2).

  4. Preparing the shade
     • Remove the flat washer (3), the hex nut (4), the cap (5) and the finial (6) from the stem assembly (C) and keep the flat washer (3), the hex nut (4), the cap (5) and the finial (6) for later use.

  5. Installing the stem assembly
     • Thread the hex nut end of the stem assembly (C) onto the coupling (2).
     • Hand-tighten until snug.

  6. Installing the light bulbs
     • Install the correct bulbs (not included) referring to fixture markings and/or labels for maximum wattage.
     NOTE: Uses two 60W maximum medium base (E26) type “A” or 9W maximum medium base (E26) self-ballasted LED bulbs (sold separately).
     

  7. Installing the shade
     • Place the shade (B) and the previously removed flat washer (3) over the stem assembly (C).
     • Secure with the previously removed hex nut (4).
     • Hand-tighten until snug.

  8. Installing the cap
     • Place the previously removed cap (5) over the stem assembly (C) extruding from the shade (B).
     • Secure with the previously removed finial (6).
     • Hand-tighten until snug.
     

Care and Cleaning

• Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
• To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.

Troubleshooting

bulb.
The power is off.| • Ensure the power supply is turned on.
There is a faulty switch.| • Test or replace the switch.
There is a faulty wire connection.| • Check the wiring.
The fuse blows or the circuit breaker
trips when the light is turned on.| There are crossed wires, or the power wire is grounding out.| • Discontinue use of the light.
• Check the wire connections.
• Contact a qualified electrician or call the Customer Care
• Service Team at 1-800-986-3460.

Service Parts

MODEL: HD0547F

Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
Please contact 1-800-986-3460 for further assistance.

References

• Home Decorators Collection - Home Decor - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>