EUPHREE X Plus Step Thru Electric Bike Instruction Manual

EUPHREE X Plus Step Thru Electric Bike

Specifications

• Model: City Robin X+
• Type: Step-Thru Electric Bike
• Manufacturer : EUPHREE
• Phone: 866-729-8075
• Website: www.euphree.com

HOW TO

ASSEMBLE YOUR CITY ROBIN X+

NOTICE: THE FOLLOWING STEPS ARE ONLY A GENERAL GUIDE TO ASSIST IN THE ASSEM-BLY OF YOUR EBIKE. THIS MANUAL IS NOT A COMPLETE NOR COMPREHENSIVE MANUAL OF ALL ASPECTS OF ASSEMBLY, MAINTENANCE AND REPAIR. CON-SULT A CERTIFIED, REPUTABLE EBIKE MECHANIC TO ASSIST WITH ASSEMBLY.

The City Robin X+
includes the following

• Ebike
• Pedals (2)
• Charger
• Front-wheel
• Tool Kit
• Keys
• Front headlight
• Thru-axle
• Front-wheel fender
• Seat post
• Saddle
• Reflectors & Phone mount
• Cafe Lock

INSTALLATION

Step 1: Survey components
Included in the shipment, if there are any missing parts, please contact Euphree

Step 2: Register your ebike
Register your ebike to activate the warranty and link it to your purchase by scanning the QR code or registering at www.euphree.com/pages/bike-registration

Handlebar features
The figure below shows the features of the handlebar

Mode Selector
The image and table below show the features and information of the Mode Selector.

Display: The image below shows the features and information of the full- color display.

Settings Menu
To change display settings and functions, press and hold the UP and DOWN buttons to open up the Settings Menu. Once in the Settings Menu press the UP and DOWN buttons to scroll through. Press the POWER to select

Settings Menu: The settings, bike information, language, colour themes, password, bluetooth and factory reset may be accessed from the settings menu

Display Settings

• The System menu is broken down into several sub-menus. Use the UP and DOWN buttons to cycle through them, and use the POWER button to select each individual sub-menu.
• An explanation of each sub-menu is on the following page.

measured in miles or kilometres
Auto Off| Off to 5 minutes| 5 Min| Determine how long the ebike stays on after last use
Trip Reset| ON / OFF| On| Resets the trip odometer after each use
Brightness| 30, 50, 75, 100%| 100%| Determines the screen brightness. 30% is the darkest and 100% is the brightest.
Bluetooth Signal Level| 1, 2, 3, 4, 5| 5| Determines the bluetooth signal strength
Start Strength| 1, 2| 1| Sets the program responsiveness. Start strength 1 is more moderate whereas 2 has a lot of pep and power.
Throttle| ON/OFF| ON| Turns on the throttle for engagement.
Drive Mode| Cadence or PAS Torque Sensor| Torque Sensor| Changes bike controller operating mode from a torque sensor to a cadence sensor

• Navigate to BACK to leave the menu.

Information

• The System menu is broken down into several sub-menus. Use the UP and DOWN buttons to cycle through them, and use the POWER button to select each sub-menu.
• An explanation of each sub-menu is following.
• The password to change settings is 1801

28 mph
Display info| N/A| –| N/A
Error Code| 1 – 9 codes| N/A| Various error codes

• Navigate to BACK to leave the menu.

Languages

• English
• German
• Dutch
• French
• Italian
• Spanish
• Czech

Themes
Themes change the display system colour scheme

• Theme 1
• Theme 2
• Theme 3
• Theme

Password

• The default password is 0000
• Set a start-up password that must be correctly typed to start
• Reset password to reset
• Bluetooth unlock for app start

Bluetooth: Scan QR Code to connect bluetooth

Factory Setting

• This menu is used to reset the bike back to the factory default settings.
• After resetting to factory default settings, please go through each menu listed above to ensure that everything is set correctly.

Navigate to EXIT to return to the home screen.

QR SCAN

FAQ

Frequently Asked Questions

• Q: How do I adjust the pedal assist level on the City Robin X+?
  • A: You can adjust the pedal assist level using the Mode Selector on the handlebar. Press the UP or DOWN buttons to increase or decrease the level.
• Q: What should I do if I encounter an error code on thedisplay?
  • A: If you see an error code on the display, refer to the manual for a list of error codes and their explanations. If needed, contact Euphree for further assistance.

CONTACT

• Phone: 866-729-8075
• Website: www.euphree.com

References

• High Quality Commuter Electric Bikes | Euphree Ebikes – euphree
• Euphree Electric Bike Registration | Protect & Secure Your E-Bike Today – euphree

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>