LANCOM CPE Blackline Rack Mount Plus Instruction Manual
- June 17, 2024
- LANCOM
Table of Contents
LANCOM CPE blackline Rack Mount Plus
Mounting instructions
CPE Blackline Rack Mount Plus
Explanations
-
Use the enclosed mounting brackets and the M3x6 Torx combination screws with serrated lock washers to fix the LANCOM device in the CPE backline Rack Mount Plus(1 .2).
The front panel of the device is correctly positioned behind the rack mount cutout. -
Remove the blind caps with strong pressure from the rear side from the CPE blackline Rack Mount Plus, insert the sockets and, if necessary, an additional optical coupling (not included in the scope of delivery) from the rear into the cutouts of the CPE blackline Rack Mount Plus and screw the sockets and coupling from the front (3).
For mounting the optical coupling, use suitable, self-tapping M2.5 pan-head screws. Then connect the cables to the corresponding connectors on the device. -
Use the enclosed M618 pan-head screws with the corresponding rosettes for mounting in a 19″ rack.
Notes
- Always ensure sufficient ventilation and leave a distance to other 19” devices, if possible.
- The permissible operating temperature range for your LANCOM product can be found in the respective product data sheet.
© 2023 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 112280 07/2023
LANCOM Systems GmbH
Adenauerstr. 20/B2
52146 Wuerselen
Germany
[email protected]
www.lancom-systems.com