LANCOM CPE Blackline Rack Mount Instruction Manual
- June 17, 2024
- LANCOM
Table of Contents
LANCOM CPE blackline Rack Mount
Mounting instructions
CPE Blackline Rack Mount
Explanations
- The LANCOM CPE blackline Rack Mount is designed in such a way that device mounting is possible with either the front panel or the rear panel facing forward.
- Use the enclosed brackets and the M36 Torx combination screws with serrated lock washers to fix the LANCOM device in the CPE blackline Rack Mount.
- The front panel of the device is correctly positioned behind the rack mount cutout.
- Use the enclosed M618 pan-head screws with the corresponding rosettes for mounting in a 19” rack.
Notes
- Always ensure sufficient ventilation and leave a distance to other 19” devices, if possible.
- The permissible operating temperature range for your LANCOM product can be found in the respective product data sheet.
© 2023 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 112280 07/2023
LANCOM Systems GmbH
Adenauerstr. 20/B2
52146 Wuerselen
Germany
info@lancom.de
www.lancom-systems.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>