ideal lux 8I285061 Oracle Slim LED Pendant Light Instruction Manual
- June 17, 2024
- ideal lux
Table of Contents
ideal lux 8I285061 Oracle Slim LED Pendant Light
Product Specifications:
- Model: Oracle Slim SP D150 Round On-Off
- LED Power: 89W
- Input Voltage: 220~240V, 50/60Hz
- Color Temperature Options:
- Bianco 3000 K – 8021696265957
- Bianco 4000 K – 8021696285078
- Nero 3000 K – 8021696285061
- Nero 4000 K – 8021696304472
Product Usage Instructions
Installation:
- Ensure installation is done by a qualified electrician.
- Follow the assembly instructions in numerical order.
LED Driver:
The product is equipped with an LED driver for efficient operation.
Light Source and Energy Efficiency:
| Light Source | Energy Class |
|---|---|
| ORACLE SLIM D150 F ROUND 3000K | 1050 mA, 72 V DC |
| ORACLE SLIM D150 F ROUND 4000K ONOFF | 1050 mA, 72 V DC |
Legend for Light Source Replacement:
- Replaceable light source by an end-user.
- Replaceable LED light source by an end-user.
- Replaceable light source by authorized personnel only
Frequently Asked Questions (FAQ):
-
Q: Can I replace the LED light source myself?
A: Yes, the LED light source can be replaced by an end-user as indicated in the legend. -
Q: What are the safety instructions for this product?
A: The product complies with European safety standards. Installation should be done by a qualified electrician. Always disconnect power before installation or maintenance.
Oracle Slim SP D150 Round On-Off
Suspension lamp
LED 89W / 220~240V 50/60Hz
- 8021696265957 BIANCO 3000 K
- 8021696285078 BIANCO 4000 K
- 8021696285061 NERO 3000 K
- 8021696304472 NERO 4000 K
- IDEAL LUX s.r.l.
- IDEAL LUX Warehouse
30036 Santa Maria di Sala (Venezia) 8.00 – 12.00 / 13.30 – 17.00
- FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION
- QUALIFICATO. THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN
THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.
This product is provided with a light source with efficiency
energy class of:
SAFETY INSTRUCTIONS
- This fitting is produced and tested in accordance with the strictest European safety standards (EN 60.598-1).
- This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
- As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
- If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
- Always isolate power before commencing installation, maintenance or repair.
- The luminaire contains certain parts which can be very hot.
- Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
- Always tighten the screws firmly to avoid contact problems.
- This fitting should only be installed indoors.
- Luminaires not suitable for recessed on normally flammable surfaces.
- Luminaire not suitable for direct mounting on normal flammable surfaces.
- This fitting is only suitable for fixing to the ceiling.
- This fitting is only suitable for fixing to the wall.
- The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
- Only use lamps which do not exceed the maximum specified wattage.
- Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed.
- Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing.
- Cracked or broken safety glass has to be replaced immediately. Use only manufacturer approved parts complying with regulations.
- Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents.
- This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
- Class I Electrical safety guaranteed by the main insulation and an additional protective conductor (earthing) connected with the metal frame of the lamp. Earthing is obligatory.
- Class Il Electrical safety guaranteed by the main insulation and a double or reinforced insulation. Earthing not necessary.
- Class III Electrical safety guaranteed by very low power supply (less than 50 Volt). Earthing excluded.
- Not protected.
- Protected against solid objects greater than 50 mm.
- Protected against solid objects greater than 12 mm.
- Protected against solid objects greater than 2,5 mm.
- Protected against solid objects greater than 1mm.
- Dust protected.
- Totally protected against dust infiltration.
- Not protected.
- Protected against vertically falling water drops.
- Protected against water drops falling with a maximum angle of 15° to the vertical axis.
- Protected against rain.
- Protected against splashing water.
- Protected against water jets.
- Protected against strong water jets.
- Protected against temporary immersion.
- Protected against prolonged immersion.
- Luminaire not suitable for covering with thermally insulating material.
- Caution, risk of electric shock.
- Do not stare at the operating light source.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>