ideal lux STYLE PT H100 Floor Lamp Instruction Manual

June 17, 2024
ideal lux

Style PT H100

STYLE PT H100 Floor Lamp

Floor lamp REV 23/10/2023ideal lux STYLE PT H100 Floor Lamp - Fig
1

LED

LED 9W / 100~240V 50/60Hz

  • 8021696209906 ANTRACITE 4000K
  • 8021696246871 ANTRACITE 3000K
  • 8021696318707 BIANCO 3000 K
  • 8021696322483 BIANCO 4000 K
  • 8021696322452 COFFEE 3000K
  • 8021696322438 COFFEE 4000K
  • 8021696322384 GRIGIO 3000K
  • 8021696322353 GRIGIO 4000K
  • 8021696322230 NERO 3000K
  • 8021696322216 NERO 4000K

ideal lux STYLE PT H100 Floor Lamp - icon 1

FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION
THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIANideal lux
STYLE PT H100 Floor Lamp - Fig 2THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.

This product is provided with a light source with efficiency energy class of:

EAN Model Efficiency Class Light Source (mA) Light Source (V)
8021696246871 STYLE PT 3000K F 110 mA 72 V DC
8021696209906 STYLE PT 4000K F 110 mA 72 V DC
8021696318707 STYLE PT 3000K F 110 mA 72 V DC
8021696322483 STYLE PT 4000K F 110 mA 72 V DC
8021696322452 STYLE PT 3000K F 110 mA 72 V DC
8021696322438 STYLE PT 4000K F 110 mA 72 V DC
8021696322384 STYLE PT 3000K F 110 mA 72 V DC
8021696322353 STYLE PT 4000K F 110 mA 72 V DC
8021696322230 STYLE PT 3000K F 110 mA 72 V DC
8021696322216 STYLE PT 4000K F 110 mA 72 V DC

LEGENDA ICONE

| Replaceable light source by an end-user.
---|---
| Replaceable LED light source by an end-user.
| Replaceable light source by authorized personnel only.
| Non-replaceable light source. Upon end of life of the light source, Sorgente luminosa non sostituibile.
| Replaceable control gear by an end-user.
| Replaceable light source by authorized personnel only.
| Upon end of life of the control gear, the whole product will be replaced.

ideal lux STYLE PT H100 Floor Lamp - icon 10

SAFETY INSTRUCTIONS

  1. This fitting is produced and tested in accordance with the strictest European safety standards (EN 60.598-1).
  2. This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
  3. As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
  4. If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
  5. Always isolate power before commencing installation, maintenance or repair.
  6. The luminaire contains certain parts which can be very hot.
  7. Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
  8. Always tighten the screws firmly to avoid contact problems.
  9. This fitting should only be installed indoors.
  10. Luminaires not suitable for recessed on normally flammable surfaces.
  11. Luminaire not suitable for direct mounting on normal flammable surfaces.
  12. This fitting is only suitable for fixing to the ceiling.
  13. This fitting is only suitable for fixing to the wall.
  14. The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
  15. Only use lamps which do not exceed the maximum specified wattage.

IDEAL LUX s.r.l.
Via Taglio Destro 32
30035 Mirano (VE) Italy
www.ideal-lux.com
IDEAL LUX Warehouse
Via delle Industrie, 8/D
30036 Santa Maria di Sala (Venezia)
8.00 – 12.00 / 13.30 – 17.00

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals