amazon basics B07VVDHF9C Oscillating Digital Dual Blades 12 Speed Standing Pedestal Fan User Guide

: June 17, 2024
: amazon basics

amazon basics B07VVDHF9C Oscillating Digital Dual Blades 12 Speed Standing Pedestal Fan User Guide

Product Overview

A (1 x)
B (1 x)
C (1x)
D (1 x)
E (1 x)
F (1x)
G (1 x)
H (1x)
1 (1x)
J (1x)

IMPORTANT SAFETY INSTRUCTIONS

Reading Icon Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

WARNING Risk of injury! Avoid contacting moving parts. Wait until all components have completely stopped before touching them.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Ensure that the fan is switched off from the supply mains before removing the guard.
Never use the product without the safety guard or with a damaged safety guard.
Place the fan on a stable, level surface during use.
Unplug or disconnect the appliance from the socket outlet before servicing.

Battery Warnings

Always insert batteries correctly with regards to polarity (+ and -) marked on the battery and the product.
Exhausted batteries should be immediately removed from product and properly disposed.

Symbols Explanation

This symbol stands for “Conformity Euro penne”, which declares “Conformity with EU directives, regulations and applicable standards”. With the CE- marking, the manufacturer confirms that this product complies with applicable European directives and regulation.

This symbol stands for “United Kingdom Conformity UK Assessed. With the UKCA- marking, the manufacturer confirms that this product complies with applicable regulations and standards within Great Britain.

Intended Use

This product is intended to produce a cooling airflow.
This product is intended for household use only. It is not intended for commercial use.
This product is intended to be used in dry indoor areas only.
No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Inserting batteries (remote control)

Open the battery compartment.
Insert two 1.5 V batteries (not included) in accordance with the polarity markings inside the battery compartment.
Close the battery compartment.

Before First Use

Check the product for transport damages.
Remove all the packing materials.
Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product’s rating label.

DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Assembly

Step 1:

Connect the leg (F) with the base (G).
Secure the connection with the knob screw (H).

Step 2:

Loosen the knurled screw on the leg (F) by turning it anti-clockwise.
Extend the inner rod to its maximum length, then secure it with the knurled screw.
Connect the main unit (E) with the rod. Fasten both parts with the knurled screw on the main unit.

Step 3

Pull the large blade (C) off the plastic piece, which is attached to the center of the rear guard (B). Remove the plastic piece and discard it.
Unscrew the fixing ring from the main unit’s front.
Connect the rear guard (B) with the main unit (E). Align the rear guard’s small round holes with the 3 pins on the main unit’s front.
Secure the rear guard (B) with the fixing ring.

Step 4:

Place the large blade (C) on the shaft. The cross pin on the shaft must be aligned with the groove on the rear side of the large blade (C).
Hold the large blade (C) with one hand and attach the small blade (D) to the shaft. Rotate the small blade (D) anti-clockwise until it stops.

Step 5:

Connect the front guard (A) with the rear guard (D). The 8 grooves on the inside of the front guard’s collar must click into place at the edge of the rear guard (D).
The hook of the guard collar needs to be attached to the rear guard (D).
Fasten both guards with the hinged locking clip and secure the clip with the screw (J).

Operation

| Increase speed| | Turning on/off
---|---|---|---
| Decrease speed| | Timer setting
| Oscillation setting| | Mode setting

Turning on/off
To turn on the product on or off, press .

Timer
NOTICE The product features a timer, which allows you to set an automatic switch off time. You can choose from 1 to 18 hours.

To turn on the timer, press. The digit 1 appears on the screen.
To set a longer time, press repeatedly.

Airflow modes
NOTICE The product features 3 airflow modes: normal, nature and sleep.
Press to toggle between the airflow modes. You can choose from following modes:

Mode	Description
Normal	Constant airflow at the currently selected speed.
Nature	The product cycles through different speed modes to provide a natural

breeze airflow.
Sleep| Constant soft airflow.

Speed

NOTICE The product features different speed settings. You can choose from 1 to 12.

To speed up the airflow, turn the control knob right (clockwise) on the main unit, or press on the remote.
To slow down the airflow, turn the control knob left (anti-clockwise) on the main unit, or press on the remote.

Oscillation

To turn on the automatic oscillation, press . To turn the oscillation off, press again

Height adjustment

Turn the knurled screw on the leg anti-clockwise.
Move the main unit up or down.
Secure the main unit by turning the knurled screw clockwise

Angle adjustment

The angle of the fan can be adjusted manually.
Simply tilt the guard up or down.

Cleaning and Maintenance

WARNING Risk of electric shock! To prevent electric shock, unplug the product before cleaning.

WARNING Risk of electric shock! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

To clean the product, wipe with a soft, slightly moist cloth.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
Regularly remove dust and dirt from the guards using a vacuum cleaner.

Maintenance

Store in a cool and dry place away from children and pets, ideally in original packaging.
Avoid any vibrations and shocks.

UK Plug Replacement

WARNING Read these safety instructions thoroughly before connecting this appliance to the mains supply.

Before switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This appliance is designed to operate on 220-240 V. Connecting it to any other power source may cause damage.

This appliance may be fitted with a non-rewireable plug. If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to damage, it should be cut off and a replacement fitted, following the wiring instructions shown below. The old plug must be disposed of safely, as insertion into a 13 A socket could cause an electric hazard.

The wires in the power cable of this appliance are coloured in accordance with the following code:

A. Green/Yellow = Earth
B. Blue = Neutral
C. Brown = Live

The appliance is protected by a 13 A approved (BS 1362) fuse.

If the colors of the wires in the power cable of this appliance do not correspond with the markings on the terminals of your plug, proceed as follows.

The wire which is cultured Green/Yellow must be connected to the terminal which is marked E or by the earth symbol or cultured Green or Green/Yello w. The wire which is cultured Blue must be connected to the terminal which is marked N or cultured Black. The wire which is cultured Brown must be connected to the terminal which is marked L or cultured Red.

Plug should be BS 1363/A approved fit a 13 A fuse.

The outer sheath of the cable should be firmly held by the clamp

Troubleshooting

Problem	Solution
The product cannot be switched on.	Check if the power plug is connected to

the power outlet. Check if the power outlet works. Wait for the product to cool down.
The product is too loud.| Tighten the blades.
The product vibrates.| Place the product on a level surface. Clean the blades.
For UK only: Fuse in the plug is blown.| Use a flat screwdriver to open the fuse compartment cover. Remove the fuse and replace with the same type (13 A, BS1362). Refit the cover.

Disposal (for Europe only)

The Waste Electrical and Electronic Equipment (WEEE) laws aim to minimize the impact of electrical and electronic goods on the environment and human health, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centres in order to conserve natural resources. Each country should have its collection centres for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Specifications

Rated voltage:	220-240 V~, 50/60 Hz
Power consumption:	28 W

Importer Information

| For UK
---|---
Postal| Amazon EU SARL, UK Branch, 1 Principal Place, Worship St, London EC2A 2FA, United Kingdom
Business Reg.:| BR017427
| For EU
Postal:| Amazon EU S.à r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg
Business Reg.:| 134248

Product Information

Description	Symbol	Value	Unit
Maximum fan flow rate	F	55.80	m³/min
Fan power input	P	30.80	W
Service value	Sv	1.81	(m³/min)/W
Standby power consumption	P SB	0.47	W
Off power consumption	P OFF	—	W
Fan sound power level	L WA	63.70	dB(A)
Maximum air velocity	C	2.82	m/s
Seasonal electricity consumption	Q	10.38	kWh/a
Measurement standard for service value	IEC 60879:2019EN 50564:2011EN IEC

60704-1:2021EN IEC 60704-2-7:2020
Contact detail for obtaining more information| For EU Amazon EU 38 avenue John F. Kennedy, L-1855 Luxembourg For Amazon EU SARL, UK Branch, 1 Principal Place, Worship St, London EC2A 2FA, United Kingdom