AVA UNI-A Mini Wireless Pen Instruction Manual

AVA UNI-A Mini Wireless Pen Instruction Manual

Machine List

1. Machine Cap
2. OLED Screen
3. Control Button
4. Adjustable Grip
5. Cartridge Needle
6. 18500 Battery
7. Battery Charger
8. Type-c Cable

Technical Data

• Model: UNi-A
• Material: Aircraft Aluminum
• Motor: AVA motor
• (Metal Brush DC Motor)
• Power intake: 5W
• Motor Speed: 10500(rpm)
• Storke: 3.5mm / 4.2mm
• Needle Protrusion : 0-5mm
• Battery Type: 18500 Lithium-ion
• Battery Voltage: 3.7V
• Rated Capacity : 1600mAh
• Charging Input: 5V / 2A
• Diameter: 33mm
• Length : 109mm
• Weight: 146g (without battery)

OLED Screen

1. Power Indicator
   
   It is suggested to use Panasonic Li-Ion 18500 Battery or don’t less than 1600mAh Li-Ion Battery

2. Working Voltage
   Working Voltage: 4.2V–12V

3. Working Frequency
   In Working Mode, display showing “V” In Pause Mode, display showing “D”

Control Button INSTRUCTIONS

1. Turn ON/OFF & Pause
   Hold button for 1 second to turn ON.
   Press Button to switch between Work and Pause Mode
   Hold button for 2 seconds to turn OFF.

2. Add Button
   Press + button increase the voltage by 0.1V
   Hold + button increase the voltage by +1V

3. Dce Button
   Press button decrease the voltage by 0.1V
   Hold button decrease the voltage by +1V

Needle Protrusion

• Turning clockwise to increase the needle protrusion length Max 5.0mm
  

• Turning anticlockwise to decrease the needle protrusion length Min 0.0mm
  

System

1. Connection Rod System
2. More powerful
3. Output more stability

WARNING

• BEFORE FIRST USE, CHARGE FOR A MINIMUM OF 3 CONSECUTIVE HOURS TO ENSURE THE MAXIMUM OUTPUT AND LIFE OF YOUR BATTERY.
• DO NOT DISASSEMBLE, PUNCTURE CRUSHHEAT OR BUAN.
• Protect the battery from heat such as from continuous sun exposure: fire and immersion into water. Do not store or operate the battery near hot or flammable objects. Them is a risk of explosion
• When not in use, keep the battery away from paper clips coins, keys, nails, screws or any other small metal objects that cause the contacts to be bridged
• A short circuit between the battery contacts may cause burns or result in a fre
• Do not place the charging unit and the battery near flammable materials, only charge the battery in dry state and at a fireproof location. There is a risk of fire due to the heat that builds up while charging
• The battery must not be charged unsupervised.

WARNING Battery installation

NOTICE

Warranty is void if machine is damaged due to incorrect battery installation.

WARNING BATTERY MAY EXPLODE OR CAUSE FIRE IF MISTREAT ED
DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE
DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION
DO NOT HEAT ABOVE 220°F. OR SHORT CIRCUIT
DO NOT CRUSH OR MODIFY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>