ROADWORX 504973 Lighting Stand User Manual
- June 17, 2024
- ROADWORX
Table of Contents
ROADWORX 504973 Lighting Stand
Specifications
- Product Name: Wind Up 100-4 Lighting Stand
- Date: 30.10.2023
- ID: 504973
- Maximum Weight-bearing Capacity: 110 kg
- Maximum Height: 4.13 m
- Special Features: Crank tripod with four feet for stability, Two telescopes extendable by crank, 3/8 mount suitable for holding speakers with a 35 mm flange, Cross beam included, optional truss adapter available (Item no. 337351)
Product Usage Instructions
Safety Instructions
Ensure the following safety instructions are strictly adhered to:
- This lighting stand is intended for stable mounting and height-adjustable positioning of spotlights only.
- Do not use the device for any other purposes not described in the user manual to prevent personal injury or property damage.
- Only individuals with sufficient physical, sensorial, and intellectual abilities should operate the device. Others must be supervised by a responsible person.
- Remove any installed devices before moving the stand to avoid tipping and causing injuries or property damage.
Operation
Follow these steps for setting up and using the lighting stand:
- Unpack the product and carefully inspect for any transportation damage.
- Retain the original packaging to protect the product during transportation or storage.
- Ensure that no devices are installed on the stand before moving it to prevent tipping over.
FAQ
-
Q: What is the maximum weight this lighting stand can hold?
A: The maximum weight-bearing capacity of the Wind Up 100-4 Lighting Stand is 110 kg. -
Q: Can the stand be extended in height?
A: Yes, the stand has a maximum height of 4.13 meters and can be extended using the crank-operated telescopes. -
Q: Is it safe to transport the stand with devices installed?
A: No, it is not safe to move the stand with devices installed as it may tip over, causing injuries or property damage. Always remove installed devices before transportation.
Thomann GmbH
- Hans-Thomann-Straße 1 96138 Burgebrach
- Germany
- Telephone: +49 (0) 9546 9223-0
- Internet: www.thomann.de
- 30.10.2023, ID: 504973
General information
- This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document.
- Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de .
Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal
words that are used in this document.
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
CAUTION!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it is not
avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and environmental damage
if it is not avoided.
|
Warning signs| Type of danger
| Warning – danger zone.
Safety instructions
Intended use
- This light stand is intended to be used for the stable mounting and height-adjustable positioning of spotlights. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
- This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
- DANGER!
- Risk of injury and choking hazard for children!
- Children can suffocate on packaging material and small parts. Children can injure themselves when handling the product. Never allow children to play with the packaging material and the product. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use.
- Never allow children to use the product without supervision. Keep small parts away from children and make sure that the product does not shed any small parts that children could play with.
- CAUTION!
- Risk of injury due to tipping of the stand during loaded transport!
- If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage. Remove the installed devices before transporting the stand.
- CAUTION!
- Risk of injury due to tipping of stand on an unsuitable ground!
- When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid ground.
- CAUTION!
- Risk of injury due to tipping of the stand from excessive loading!
- In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the stand.
- CAUTION!
- Risk of injury due to tipping of the stand from excessive or one-sided loading of the truss beam.
- In case of excessive or one-sided loading of the truss beam the stand might tip over, causing injury and property damage. Never exceed the specified maximum load for the truss beam. Spread the weight of the mounted devices evenly on the truss beam.
- NOTICE!
- Possible staining due to plasticiser in rubber feet!
- The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.
Features
Special characteristics:
- Crank tripod with four feet for more stability
- Two telescopes, extendable by means of a crank
- 3/8″ mount (suitable for holding speakers with a 35 mm flange)
- Maximum weight-bearing capacity: 110 kg
- Maximum height: 4.13 m
- Cross beam included in delivery
- optional truss adapter: Item no. 337351
Operation
Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
- CAUTION!
- Risk of injury due to tipping of the stand during loaded transport!
- If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage.
- Remove the installed devices before transporting the stand.
- CAUTION!
- Risk of injury due to tipping of stand on an unsuitable ground!
- When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage.
- Install the stand only on even and solid ground.
- CAUTION!
- Risk of injury due to tipping of the stand from excessive loading!
- In case of excessive loading, the stand might tip over, causing injury and property damage.
- Never exceed the specified maximum load for the stand.
- CAUTION!
- Risk of injury due to tipping of the stand from excessive or one-sided loading of the truss beam.
- In case of excessive or one-sided loading of the truss beam the stand might tip over, causing injury and property damage.
- Never exceed the specified maximum load for the truss beam.
- Spread the weight of the mounted devices evenly on the truss beam.
- Comply with regulations
When installing and operating, make sure to follow the standards and regulations that apply in your country.
Setup
- Loosen safety screw [1] on the lower carriage and unfold stand feet [2] until safety bolt [10] engages in the desired position in main tube [3].
- Fix the position with safety screw [1] on the lower carriage to which the four cross beams are attached.
- Flange the truss beam onto the mount for the truss beam at the top end of stand [9] and tighten the safety screw of the mount. Attach the spotlights. Pay attention to an even weight distribution to reach a centric load of the stand. The maximum load capacity of 110 kg in total must not be exceeded.
- Loosen safety screw [4] on the tube clamp of square tube [7].
- Crank upper extension tube [5] clockwise with crank [8] until safety bolt [12] engages in the desired position in upper extension tube [5]. Fix the position of the extension tube with safety screw [4] on the tube clamp of square tube [7].
- Loosen safety screw [6] on the tube clamp of main tube [3].
- Crank out square tube [7] clockwise with crank [8] until safety bolt [11] engages in the desired position in square tube [7]. Fix the position of the square tube with safety screw [6] on the tube clamp of main tube [3].
- Turn crank [8] slightly anti-clockwise to avoid over-tensioning the wire rope.
Disassembly
- Pull out spring split pin [A] of safety bolt [11] and fold fixing [B] in the opposite direction with the maximum angle in order to pull the safety bolt out of square tube [7].
- Loosen safety screw [6] on the tube clamp of main tube [3] and crank square tube [7] all the way down with crank [8]. Fix the position of the square tube with safety screw [6].
- Pull out spring split pin [A] of safety bolt [12] and fold fixing [B] in the opposite direction with the maximum angle to pull the safety bolt out of upper extension tube [5].
- Loosen safety screw [4] on the tube clamp of square tube [7] and crank upper extension tube [5] all the way down with crank [8]. Fix the position of the extension tube with safety screw [4].
- Remove the spotlights. During disassembly, pay attention to an even weight distribution to reach a centric load of the stand.
- Loosen the safety screw of the mount and detach the truss beam.
- Pull out spring split pin [A] of safety bolt [10] and fold fixing [B] in the opposite direction with the maximum angle to pull the safety bolt out of main tube [3].
- Loosen safety screw [1] on the lower carriage, to which the four cross struts are attached, and fold up the feet of stand [2].
- Pack all parts of the system in their original package, as possible, and store the package in a dry place protected against moisture.
Technical specifications
| Height, max. | 4.13 m |
|---|---|
| Holder type | 3/8″ mount; flange, 0 35 mm |
| Tripod space, max. | 2.13 m |
| Load, max. (with centric load) | 110 kg |
| Transport size | 1.95 m |
| Weight | 28.8 kg |
| Dimensions cross beam | 1300 mm × 35 mm × 35 mm |
EU declaration of conformity
Name and address of manufacturer / EU-AR| Thomann GmbH Hans-
Thomann-Straße 1 96138 Burgebrach Germany
---|---
THIS DECLARATION OF CONFORMITY IS ISSUED UNDER
THE SOLE RESPONSIBILITY OF:
Name and address of| Thomann GmbH
manufacturer| Hans-Thomann-Straße 1
| 96138 Burgebrach
| Germany
Product identification| 504973 Roadworx Win Up 100-4
THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY
WITH:
EU Community Legislation| Machinery Directive
2006/42/EC
Harmonised standards| Safety of machinery
| EN 1005-3:2002 + A1:2008
| EN 13157:2004 + A1:2009
| EN ISO 12100:2010
SIGNED FOR AND ON BEHALF OF:
Place and date of issue Burgebrach, 18 November 2021
Protecting the environment
Disposal of the packing material
- Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner.
- Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging.
- Observe the disposal note regarding documentation in France.
