Keychron Q6 Max Wireless Custom Mechanical Keyboard User Guide
- June 17, 2024
- Keychron
Table of Contents
Keychron Q6 Max Wireless Custom Mechanical Keyboard
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Quick Start Guide
Connect 2.4 GHz Receiver
Connect Bluetooth
Connect Cable
The Layers
Adjust The Backlight Brightness
Warranty
The keyboard is highly customizable and easy to rebuild. If anything goes wrong with any of the keyboard components of the keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
The VIA Key Remapping Software
Please visit the usevia. app to use the online VIA software to remap the keys. If the VIA cannot recognize your keyboard, please reach our support to get the instruction.
- The online VIA software can only run on the latest version of Chrome, Edge, and Opera browsers yet.
- VIA only works when the keyboard is connected by wire to the computer.
The Backlight
Adjust The Backlight Speed
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Download the right firmware and QMK Toolbox from our website.
- Unplug the power cable and switch the keyboard to Cable mode.
- Remove the space bar keycap to tind the reset button on the PLB
- Hold the reset key first, then plug the power cable into the keyboard. Release the reset key after 2 seconds, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard by pressing fn + J + Z (for 4 seconds).
- Step by step guide can be found on our website.
Not Happy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>