prescolite LFR-4RD Liteframe 4 Inch Round Downlight Owner’s Manual

prescolite LFR-4RD Liteframe 4 Inch Round Downlight

Product Information

Specifications

• Product Name: LFR-4RD
• Product Type: LITEFRAME 4 ROUND DOWNLIGHT
• Date: [Date]
• Type: [Type]
• Catalog #: [Catalog Number]
• Location: [Location]
• Project: [Project Name]
• Features:
  • Wet Location Rated (IP65)
  • CL Lens Option
  • Control Technology
  • Service Programs
• Construction: Non-IC, Direct Install
• Flange Type: Self-flanged

Product Usage Instructions

Installation

To install the LFR-4RD LITEFRAME 4 ROUND DOWNLIGHT, please follow these steps:

1. Ensure the power source is turned off before installation.
2. Select a suitable location for the downlight.
3. If necessary, create a hole in the ceiling with the appropriate dimensions.
4. Connect the wiring according to the provided electrical diagram.
5. Securely mount the downlight into the ceiling hole using the provided screws or brackets.
6. If applicable, attach the CL Lens Option to the downlight.
7. Turn on the power source and test the functionality of the downlight.

Maintenance

To ensure optimal performance and longevity of the LFR-4RD LITEFRAME 4 ROUND DOWNLIGHT, please follow these maintenance guidelines:

• Regularly clean the surface of the downlight using a soft cloth or non-abrasive cleaning agent.
• Inspect the wiring connections periodically to ensure they are secure and free from damage.
• Replace any damaged or worn-out components immediately to prevent potential hazards.
• Refer to the service programs included with the product for additional maintenance instructions.

Frequently Asked Questions (FAQ)

Q: Can the LFR-4RD be used in wet locations?
A: Yes, the LFR-4RD is rated for wet locations with its IP65 certification.

Q: What is the purpose of the CL Lens Option?
A: The CL Lens Option provides additional control over the light distribution, allowing you to customize the lighting effect according to your needs.

Q: Can the LFR-4RD be installed in insulated ceilings?
A: No, the LFR-4RD is designed for non-IC (Non-Insulation Contact) construction. It should not be installed in direct contact with insulation materials.

FEATURES

• 4″ LED downlight delivering 1000–6000 lumens
• Direct Install from below ceiling for New Construction or Remodel applications
• Optional housing accessories available
• Five beam distributions
• 2700K–5000K, 80+ and 90+ CRI (2 SDCM)
• Dimming protocols include 0–10V, Phase (Forward/Reverse), DALI, DMX,and Lutron EcoSystem
• NX Lighting Controls wired and wireless controls capability available

CONTROL TECHNOLOGY

SPECIFICATIONS

CONSTRUCTION

• Standard Fixture Module designed for Non-IC, Direct Install construction
• Optional Non-IC frame or IC housing available with pre-installed bar hangers
• Die cast aluminum fixture module support ring with spring steel clips for secure mounting to ceiling
• Driver J-Box can be installed and accessed from below the ceiling as direct install or easily snap on to optional housing frame/enclosure
• Light Engine connections use plenum rated (CMP) cable

OPTICS

• High purity spun aluminum reflector, self-flanged
• 57° visual cutoff to source image and 31° cutoff to source
• Specular or Semi-Specular anodized or White painted cone reflector finish/colors
• Painted flange options in White or Black
• Optional clear lens trim for wet location applications
• Wide Angle and Soft Focus lens filter/clip accessories available.

ELECTRICAL

• Chip-on-board LED with 2 SDCM
• Multiple CCTs, 80+ or 90+ CRI
• Long LED life: L90 at >50,000 hours (TM-21)
• Universal voltage 120–277V driver, 347V optional
• UL Class 2, inherent short circuit and overload protection
• Flicker-free dimming options in a wide range of protocols from 1% to <0.1% performance
• 0–10V, Phase (Forward/Reverse), DALI, DMX, and Lutron EcoSystem options
• Integral and remote emergency battery options available

INSTALLATION

• Accommodates ceiling thickness from 0.50″ to 2.50″
• Fixture Module including driver fully accessible from above or below the ceiling
• 10L Fixture Modules are inherently protected
  IC without the use of IC housing enclosure.
  (IC housing is still recommended when using loose-fill or spray foam insulation types.)

CERTIFICATIONS

• cCSAus certified to UL 1598
• For ≥50L: Marked spacing required 36″ fixture center to center; 18″ fixture center to building member; 0.5″ above fixture
• Suitable for wet locations, covered ceiling when used with CL lens trim; all other configurations, suitable for damp locations
• CL Lens Option: IP65 rated (room side) when properly installed per installation instructions
• EM/EMR: Certified under UL 924 standard for emergency lighting and power equipment
• Approved for 8 (4 in/4 out) No. 12AWG conductors rated for 90°C through wiring
• ENERGY STAR® certified models available (For list and additional information, visit www.energystar.gov)

WARRANTY

• 5 year warranty

KEY DATA

Lumen Range| 1000–6000
Wattage Range| 8–54
Efficacy Range (LPW)| 105–135
Reported Life (Hours)| L90 / >50,000
Input Current (mA)| 66–450 (120V)

ORDERING GUIDE

FIXTURE MODULE

TRIM (Ships separately)

HOUSING OPTIONS (Ships separately)

Accessories

• SFL4 Soft Focus Lens and Clip, 4″ Round
• WAL4 Wide Angle 80° Lens and Clip, 4″ Round
• LiteGear LiteGear® Inverter, 125VA–250VA
• LPS Series LightPower Micro-Inverter, 20VA–55VA
• LF-FMR4-R Flush Mount Mud-in Ring, 4″ 13
• LF-MOR4-R-WH Metal Oversized Ring, 4″ Round, White (8.3″ outside diameter)
• LFR-SCA4-__ Sloped Ceiling Adapter, 4″ White14

Notes:

1. 50L and 60L require marked spacing. See line art for more details.

2. DM01, PDM, DMX, DALI available up to 50L. EDM available 15L–40L.

3. NX requires DM1 driver option.

4. 347V requires DM1 driver option; available 10L–40L; not available with Controls, DTS, EM, EMR.

5. CP not available with PDM, DMX, or Controls.

6. Module options not available in combination.

7. DTS available with DM1, DM01, DALI, or DM00.

8. WT not needed for WC.

9. CL lens and EM trim options not available in combination.

10. IC available up to 35L; 10L Fixture Modules are inherently protected IC without the use of
    IC housing enclosure. (IC housing is still recommended when using loose-fill or spray foam types.)

11. IC Housing not for use in combination with Controls or with Module Options CP, EM, EMR, DTS.

12. XW distribution is not available for Specular (S) reflector finish.

13. Flush Mount Flange (FM) requires FMR accessory (sold separately).

14. Specify slope angle 5°–35° in 5° increments. Not available with EM or FM options.

15. DM00 must be selected with AWNR Lutron Athena controls option.

CONTROLS

NX Lighting Controls:
Supports applications in a variety of deployment options. Integrates with and enables a wide array of luminaires including those with SpectraSyncTM Color Tuning Technology.

NX INTEGRATED CONTROLS REFERENCE

NX Option| Sensor| Networkable| Scheduling| Occupancy| Daylight Harvesting| 0–10V

Dimming

| On/off Control| Bluetooth® App Programming
NX Networked – Wired
NXE| N/A| Yes| Yes| No| No| Yes| Yes| Requires NXBTC 1
NX Networked – Wireless
NXW2| N/A| Yes| Yes| No| No| Yes| Yes| Yes

1. NXBTC needs to be plugged into an available NX SmartPort™ on the fixture network
2. Programming via App requires factory assistance

PERFORMANCE DATA TABLE

Performance data shown is 3500K 80+CRI with Specular reflector except Extra Wide distribution which is Semi-Specular.

10L

|

1000

| Very Narrow| 979| 7.6| 129
Narrow| 1023| 7.6| 135
Medium| 997| 7.6| 131
Wide| 995| 7.6| 131
Extra Wide| 947| 7.6| 125

15L

|

1500

| Very Narrow| 1471| 11.8| 125
Narrow| 1536| 11.8| 130
Medium| 1498| 11.8| 127
Wide| 1494| 11.8| 127
Extra Wide| 1422| 11.8| 121

20L

|

2000

| Very Narrow| 1937| 15.2| 127
Narrow| 1982| 15.3| 130
Medium| 1933| 15.3| 127
Wide| 1928| 15.3| 126
Extra Wide| 1835| 15.2| 121

25L

|

2500

| Very Narrow| 2465| 20.9| 118
Narrow| 2574| 20.9| 123
Medium| 2510| 20.9| 120
Wide| 2504| 20.9| 120
Extra Wide| 2384| 20.9| 114

30L

|

3000

| Very Narrow| 2938| 26.0| 113
Narrow| 3068| 26.0| 118
Medium| 2992| 26.0| 115
Wide| 2985| 26.0| 115
Extra Wide| 2842| 26.0| 109

35L

|

3500

| Very Narrow| 3571| 29.4| 121
Narrow| 3729| 29.4| 127
Medium| 3637| 29.4| 124
Wide| 3628| 29.4| 123
Extra Wide| 3454| 29.4| 117

40L

|

4000

| Very Narrow| 3982| 32.9| 121
Narrow| 4157| 32.9| 126
Medium| 4055| 32.9| 123
Wide| 4045| 32.9| 123
Extra Wide| 3851| 32.9| 117

50L

|

5000

| Very Narrow| 4844| 42.0| 115
Narrow| 5058| 42.0| 120
Medium| 4933| 42.0| 117
Wide| 4921| 42.0| 117
Extra Wide| 4684| 42.0| 112

60L

|

6000

| Very Narrow| 5778| 53.4| 108
Narrow| 6033| 53.4| 113
Medium| 5884| 53.4| 110
Wide| 5870| 53.4| 110
Extra Wide| 5588| 53.4| 105

DIMENSIONS

LFR-4RD-M

Fixture Module consists of Light Engine and Driver J-Box assemblies.
Overall dimensions for each are dependent upon configuration selected.
See the following pages for details.

DIMENSIONAL DATA

APERTURE| Ø4.00″ (101.6mm)
OVERALL| Ø5.37″ (136.5mm)

FLANGE WIDTH

| Standard| 0.69″ (17.5mm)
Flush Mount| 0.19″ (4.8mm)

FLANGE TO FLANGE

| Standard| Ø5.37″ (136.6mm)
Flush Mount| Ø4.38″ (111.2mm)

CEILING CUTOUT

| Standard| Ø4.75″ (120.7mm)
Flush Mount| Ø4.88″ (123.9mm)
CEILING THICKNESS| 0.50″ – 2.50″ (12.7 – 63.5mm)

LFR-4RD LIGHT ENGINE

OVERALL LIGHT ENGINE HEIGHT “A” *

LUMEN PACKAGE| FIXTURE MODULE| BEAM DISTRIBUTION
VNR| NR / MD/ WD| XW

10L–30L

| STANDARD| 6.24″ (158.5mm)| 5.45″ (138.5mm)| 5.1″ (129.5mm)
CP| 9.22″ (324.1mm)| 8.43″ (214.0mm)| 8.08″ (205.1mm)

35L–60L

| STANDARD| 7.82″ (198.6mm)| 7.03″ (178.6mm)| 6.68″ (169.7mm)
CP| 9.22″ (234.1mm)| 8.43″ (214.0mm)| 8.08″ (205.1mm)

Note: Add ½” minimum plenum clearance above overall Light Engine Height.

For ≥50L: Marked spacing required 36″ fixture center to center;
18″ fixture center to building member; 0.5″ above fixture.
Non-IC rating requires 3″ from insulation and combustible materials.

DRIVER J-BOX

OVERALL DRIVER J-BOX DIMENSIONS (ALL LUMEN OUTPUTS)

DRIVER/ CONTROLS OPTIONS| “B” (HEIGHT)| “C” (LENGTH)| “D” (WIDTH)| MINIMUM J-BOX PLENUM CLEARANCE
DM1 / DM01 / PDM / DALI| 2.67″ (67.8mm)| 5.34″ (135.6mm)| 3.23″ (82.0mm)| 3.50″ (88.9mm)
DMX| 3.07″ (78.0mm)| 8.68″ (220.5mm)| 3.23″ (82.0mm)| 5.00″ (127.0mm)
NX| 3.02″ (76.7mm)| 8.68″ (220.5mm)| 3.23″ (82.0mm)| 6.00″ (152.4mm)
EM/EMR| 2.73″ (69.3mm)| 5.34″ (135.6mm)| 3.23″ (82.0mm)| 4.00″ (101.6mm)
CP| 1.89″ (73.4mm)| 6.50″ (165.1mm)| 2.72″ (69.1mm)| 5.00″ (127mm)

EM/EMR OPTION
EM/EMR Driver J-Box Conduit (provided) connects to Driver J-Box
(see Driver J-Box for additional details)

OPTIONAL HOUSINGS

PHOTOMETRY

LFR-4RD-M-20L35K8VNR-DM1 / LFR-4RD-T-VNR-S

LUMINAIRE DATA

ZONAL LUMEN SUMMARY

LFR-4RD-M-20L35K8NR-DM1 / LFR-4RD-T-S

LUMINAIRE DATA

ZONAL LUMEN SUMMARY

LFR-4RD-M-20L35K8MD-DM1 / LFR-4RD-T-S

LUMINAIRE DATA

ZONAL LUMEN SUMMARY

LFR-4RD-M-20L35K8WD-DM1 / LFR-4RD-T-S

LUMINAIRE DATA

ZONAL LUMEN SUMMARY

LFR-4RD-M-20L35K8XW-DM1 / LFR-4RD-T-SS

LUMEN MULTIPLIER

ZONAL LUMEN SUMMARY

LUMEN MULTIPLIER

Photometrics are published below at a nominal 3500 Kelvin, 80+ CRI. This table may be used to approximate the lumen values at different Kelvin temperatures. Power consumption would stay the same.

LENS OPTION / LENS FILTER ACCESSORY MULTIPLIER (Based on Clear Specular)

Option| CL (Clear Lens)| SFL4 (Soft Focus Accessory)| WAL4 (Wide Angle Accessory)
---|---|---|---
Multiplier| 0.95| 0.96| 0.83

Multiply lumen/lens multipliers to calculate applicable combinations. Example: 30K8 with Clear Lens option (CL) = 0.96 x 0.95 = 0.91

TM-30 DATA

TEST RESULTS – 3500K

Value| 80+ CRI| 90+ CRI
Rf| 85| 90
Rg| 95| 99
CCT (K)| 3422| 3416
DUV| -0.0008| -0.0019
x| 0.4089| 0.408
y| 0.3906| 0.3877
CIE Ra| 85| 93
CIE R9| 16| 66

ELECTRICAL DATA

DRIVER DATA

Input Voltage| 120-277 V| 347 V
Input Frequency| 50/60 Hz| 50/60 Hz
Power Factor| ≥0.90| ≥0.90
THD| <20%| <20%
EMI Filtering (FCC 47 CFR Part 15)| Class A| Class A

Values for DM1 option shown, values for other dimming options may vary.

ADDITIONAL INFORMATION

Dimming Compatibility
For more details and recommended dimmer list, see Dimming Compatibility Information on currentlighting.com/prescolite.

DMX
See instruction sheet on currentlighting.com/prescolite for connection & installation information.

Central Inverters
For full fixture output in back-up mode, we recommend you visit currentlighting.com/dual-lite.com for your Central Lighting Inverter options.
Please contact your local Current representative for any assistance with proper sizing and loading of your inverter selection. Central lighting inverters must be ordered separately.

currentlighting.com/prescolite
© 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.

References

• Prescolite | Current - HLI Brands
• Homepage | ENERGY STAR

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>