Kress KR172E Mission RTK Robotic Mower Automower Instruction Manual

Kress KR172E Mission RTK Robotic Mower Automower

Product Information

prevent
electric shock, fire, and serious injury. This appliance is not
intended for use by children or individuals unfamiliar with the
instructions.
Safe Operation Practices|

• Read the instructions carefully and be familiar with the
  controls and proper use of the appliance.

• Do not allow children or individuals unfamiliar with the
  instructions to use the appliance.

• The operator or user is responsible for accidents or hazards
  occurring to other people or their property.

Preparation|

• Ensure that the virtual boundary is established as instructed
  and regularly maintained.

• The virtual boundary specifies the work area where the machine
  is allowed to operate.

Operation|

• Never operate the appliance with defective guards or without
  safety devices.

• Avoid placing hands or feet near or under rotating parts.

• Do not pick up or carry the appliance while the motor is
  running.

• Use the disabling device before clearing blockages, checking,
  cleaning, or working on the appliance.

• Do not modify the original design of the robotic
  lawnmower.

• Start the robotic lawnmower according to the instructions and
  keep hands and feet away from the rotating blades.

• Do not lift or carry the robotic lawnmower while the power is
  on.

• Do not let individuals who are unfamiliar with how the robotic
  lawnmower works use it.

• Avoid placing anything on top of the robotic lawnmower or its
  charging base.

• Do not use the robotic lawnmower with a defective blade disc,
  body, blades, screws, nuts, or cables.

• Always switch off the robotic lawnmower when not in use.

Product safety

General safety warnings

• WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
• Carefully read the instructions for the safe operation of the machine.
• Save all warnings and instructions for future reference.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance contains batteries that are only replaceable by skilled persons.
• WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

IMPORTANT

READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE

Safe operation practices Training

• a) Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the appliance.
• b) Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the operator.
• c) The operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

• a) Confirm that the virtual boundary is established as instructed and the virtual boundary is regularly maintained. Before each working cycle, the machine goes around the working area to check whether the virtual boundary exists, if it does not exist, the machine will shut down. The virtual boundary specifies the work area where the machine is allowed to operate. The RTK antena in the machine senses when it is approaching the virtual boundary. When the machine hits an obstacle or approaches the virtual boundary the product selects a new direction.
• b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects.
• c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
• d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.
• e) WARNING! The lawnmower shall not be operated without the guard in place.

Operation

General

• a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place.
• b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• c) Never pick up or carry an appliance while the motor is running.
• d) Operate the disabling device from the appliance
  • Before clearing a blockage;
  • Before checking, cleaning or working on the appliance;
  • After striking a foreign object to inspect the machine for damage;
  • If the machine starts to vibrate abnormally, and check for damage before restarting.
• e) It is not permitted to modify the original design of the robotic lawnmower. All modifications are made at your own risk.
• f) Start the robotic lawnmower according to the instructions. When the power is on, make sure you keep your hands and feet away from the rotating blades. Never put your hands and feet under the mower.
• g) Never lift up a robotic lawnmower or carry it when the power is on.
• h) Do not let persons who do not know how a robotic lawnmower works and behaves use the mower.
• i) Do not put anything on top of the robotic lawnmower or its charging base.
• j) Do not allow robotic lawnmowers to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or cables.
• k) Always switch off the robotic lawnmower when you do not intend to use the mower. A robotic lawnmower can only start when the power is on and the correct PIN code has been entered.
• l) Keep your hands and feet away from the rotating blades. Never place your hands or feet close to or under the body when a robotic lawnmower is in operation.
• m) To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning.
• n) Not to touch moving hazardous parts before these have come to a complete stop.
• o) For machines used in public areas, warning signs shall be placed around the working area of the machine. They shall show the substance of the following text:
• Warning! Automatic lawnmower! Keep away from the machine! Supervise children!

Additionally when the appliance is operating automatically

• a) Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity.

Maintenance and storage

WARNING! When the mower is turned upside down the power must always be off. The power should be off during all work on the mower’s underframe, such as cleaning or replacing the blades.

• a) Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working condition.
• b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety.
• c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced.
• d) Ensure that only replacement cutting means of the right type are used.
• e) Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
• f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc.
• g) Servicing of the appliance should be according to the manufacturers’ instructions.

Recommendation
To connect the machine and/or its peripherals only to a supply circuit protected by a residual current device (RCD) with a tripping current of not more than 30 mA.
Residual risks
To avoid injuries, wear protective gloves when replacing the blades.

Transport

The original packaging should be used when transporting robotic lawnmower over long distances.
To safely move form or within the working area:

• a) Press the STOP button to stop the mower. You select the four digit PIN code when you start the mower for the first time.
• b) Always switch off robotic lawnmower if you intend to carry the mower.
• c) Carry the mower by the handle at the rear under the mower. Carry the mower with the blade disc away from the body.

RF exposure requirements
To satisfy RF exposure requirements, a separation distance of 200mm or more should be maintained between this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Safety Warnings for battery pack inside the tool

• a) Do not dismantle, open or shred the battery pack.
• b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• c) Do not expose the battery pack to heat or fire. Avoid storage in direct sunlight.
• d) Do not subject the battery pack to mechanical shock.
• e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• f) Keep the battery pack clean and dry.
• g) Recharge only with the charger specified by Kress. Do not use any charger other than that specifically provided for use with the equipment.
• h) Do not use any battery pack which is not designed for use with the equipment.
• i) Keep battery packs out of the reach of children.
• j) Retain the original product literature for future reference.
• k) Dispose of it properly.
• l) Do not mix cells of different manufacture, capacity, size or type within a device.
• m)Keep the battery away from microwaves and high pressure.

Symbols

• WARNING – robotic lawnmower can be dangerous if incorrectly used. Read through the Operator’s manual carefully and understand the content before using your robotic lawnmower.

• WARNING – Keep a safe distance from the machine when operating.

• WARNING – Operate the disabling device before working on or lifting the machine.

• WARNING – Do not ride on the machine.

• Class III appliance

• Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice.

• Li-Ion battery. This product has been marked with a symbol relating to a ‘separate collection’ for all battery packs and battery packs.

  • It will then be recycled or dismantled in order to reduce the impact on the environment. Battery packs can be hazardous for the environment and for human health since they contain hazardous substances.

• Do not burn.

• Batteries may enter water cycle if disposed of improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.

• Do not wash the machine with a high-pressure washer

• Read operator’s manual

• Detachable supply unit

Component list

1. Ultrasonic sensor
2. Charging Strips
3. Rear Driving Wheel
4. Rain Sensor
5. STOP Button
6. Display
7. Keypad
8. ON/OFF Key
9. START Key
10. Front Wheel
11. Blade Turning Disc
12. Battery Pack *
13. Handle
14. Cutting Blade
15. Charging Pile
16. Contact Pins
17. Charging Base
18. Power Adapter
19. Charging Base Fixing Nails
20. RTK Antenna
21. Hex Key
22. Wrench for RTK antenna
23. Magnetic Strip
24. Staples
25. Hexagon Screwdriver * (Only for KR174E)
26. Buckle

Not all the accessories illustrated or described are included in standard delivery.

Technical data

Type KR172E KR173E KR174E (100-199 – designation of machinery, representative of Robotic Lawnmower)

 | KR172E| KR173E| KR174E|
---|---|---|---|---
Rated voltage| 20V __  Max.*
No load speed| 2700/min| 2600/min
Cutting area| 2000m2| 3000m2| 5000m2
Cutting diameter| 20cm| 22cm
Cutting height| 30-60mm
Cutting height positions| 7
Battery type| Lithium-ion
Battery model| KA3024| KA3006
Charging time approx.| 180 min| 90 min| 72 min
Charger model| KA0200 / KA0201| KA3710/KA3711| KA3719/KA3819

Charger rating

| Input: 100-240V~50/60Hz,

38W,

Output: 20V, 1.5A

| Input: 100-240V~50/60Hz,

90W,

Output: 20V, 3.0A

| Input: 100-240V~50/60Hz,

190W,

Output: 28V, 5.0A

Machinery weight| 12kg| 12.2kg| 12.6kg
Protection degree| III
App| Y
Maximum slope within the work surface| 40%

Technical Data For Antenna

Noise data

(A), KpA= 3.0 dB(A)
A weighted sound power| LwA = 55.5 dB (A), KwA= 3.0 dB(A)| LwA = 58.3 dB (A), KwA= 3.0 dB(A)
Wear ear protection when sound pressure is over| 80dB(A)

A degree of noise from the machine is not avoidable. Route noisy work is to be licensed and limits for certain periods. Keep rest periods and they may need to restrict the working hours to a minimum. For their personal protection and protection of people working nearby, an appropriate hearing protection shall be worn.

Accessories

 | KR172E| KR173E| KR174E|

---|---|---|---|---
Screw for fixing disk| /| /| 3
Screw for fixing blades| 9| 9| 18
Charging base| 1| 1| 1
Charging base fixing nails| 6| 6| 6
Hex key| 1| 1| 1
Wrench for RTK antenna| 1| 1| 1
Magnetic strip| 1| 1| 1
Measurement gauge| 1| 1| 1
Blade| 9| 9| 18
RTK antenna| 1| 1| 1
Staples| 16| 16| 16
Hexagon screwdriver| /| /| 1
Battery pack (KA3024 / KA3006)| 1| 1| 1
Charger (KA0200/KA0201)| 1| /| /
Charger (KA3710/KA3711)| /| 1| /
Charger (KA3719/KA3819)| /| /| 1

We recommend that you purchase genuine accessories listed in the above list from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

Intended Use
The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better-looking lawn than ever before. Depending on the size of your lawn, MissionTM RTKn may be programmed to operate at any time or frequency. It is not intended for digging, sweeping or snow cleaning.

Maintenance

Your MissionTM RTKn works hard and needs to be cleaned and checked from time to time. Some parts will require replacement as they become worn. Never use your MissionTM RTKn with a defective on/off switch.
Switch off the machine before carrying out any service or maintenance. Here’s how to take care of your MissionTM RTKn.

Keep it Sharp

WARNING: Before cleaning, adjusting, or replacing the blades, turn your MissionTM RTKn OFF and put on protective gloves.
WARNING: When fitting new blades, make sure you replace ALL the blades. Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade-turning disc. Failure to use new screws could cause serious injury.
The MissionTM RTKn does not cut grass like other mowers. Its cutting blades are razor-sharp on 2 edges and rotate in both directions for maximum cutting capacity. Redesigned blade profile better prevents grass clippings from getting caught in the gap between the disc and the blade. And with new material, the service life of each cutting blade will be longer than that of other brands when it is programmed to mow every day. Always check to see if the blades are chipped or damaged and replace them if they are. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your MissionTM RTKn. Spare blades are also available at your nearest Kress retailer.

A. Replace the blades

Usually, your MissionTM RTKn’s blades need to be reversed each month and replaced every week, you can adjust the frequency of replacing the blade according to the cutting quality of the lawn. When replacing the blades, make sure to replace all of them at the same time. You can replace them with one of the spare blade kits and extra blade screws supplied with your MissionTM RTKn. Before attempting to replace your MissionTM RTKn’s blades, turn the power off and put on protective gloves and follow these steps:

1. Gently flip the MissionTM RTKn over.
2. Remove the battery cover and remove the battery.
3. Take the screws off the blades with a screwdriver.
4. Firmly screw on the new blades.
5. Refit the battery and the battery cover.

If your MissionTM RTKn has dual-layer blades, follow these steps to replace them:

1. Turn off and gently flip the MissionTM RTKn over.
2. Remove the battery cover and remove the battery.
3. Take the 3 screws for fixing the disk off with a hexagon screwdriver.
4. Remove the disk.
5. Take the 6 screws for fixing blades off with a screwdriver and remove the blades.
6. Firmly screw on the new blades and new screws for fixing blades.
7. Refit and firmly screw on the disk on the underside of MissionTM RTKn.
8. Refit the battery and the battery cover.

Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely.

Keep it Clean

WARNING: Before cleaning, turn your MissionTM RTKn OFF. Put on protective gloves before cleaning the blade-turning disc and do not rinse or flush with water.
WARNING! YOUR MissionTM RTKn can only be washed by using a hose! DO NOT use a high-pressure washer on your MissionTM RTKn. High-pressure water can go inside the sealings and damage electronic and mechanical parts.

A. Cleaning the Body

Your MissionTM RTKn will live a much happier and longer life if it is cleaned regularly. Since your MissionTM RTKn is an electric machine, you will need to take care when cleaning. Hose water clean is supported. It is best to use a spray bottle filled with water. When cleaning the machine body, use a soft brush or clean cloth and avoid using solvents or polishes. Lastly, remove all buildup of grass clippings and debris.

B. Cleaning the underside

Again, it is important that you power the MissionTM RTKn OFF and wear protective gloves before touching the blade-turning disc. First, flip your MissionTM RTKn upside down to expose its underside. Here you will see the blade disc, the chassis, and the front wheel and driving wheels. Clean everything thoroughly with a soft brush or moist rag. Hose water clean is supported. Rotate the blade disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions.
IMPORTANT: Remove any stuck debris so that it does not cause a crack in the blade disc. Even the tiniest crack can decrease your MissionTM RTKn’s mowing output.

C. Clean the contact pins and the charging strips
Clean the contact pins located on the charging base and the charging strips located on the MissionTM RTKn using a cloth. Remove any built up grass clippings or debris around the contact pins and charge strips periodically to ensure the MissionTM RTKn successfully charges each time.

Battery Life

The heart of the MissionTM RTKn is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully charged and kept in a cool dry place between (-20oC~+60oC).
NOTE: The recommended MissionTM RTKn operation temperature is between 0-55oC.
The life-span of the MissionTM RTKn’s battery depends on various factors, such as:

• The length of the mowing season in your region
• Amount of hours the MissionTM RTKn mows per day
• Battery maintenance during storage

MissionTM RTKn can be charged manually.

1. Connect the charging base to a suitable power supply. The green light on the charging base will turn on.
2. Manually dock the MissionTM RTKn into the charging base while the MissionTM RTKn is powered off.
3. The green light on the charging base will be flashing and MissionTM RTKn will begin to charge.

Winter Hibernation

Your MissionTM RTKn will live longer and healthier if it is allowed to hibernate. So even though it is tough, we recommend storing your MissionTM RTKn in your shed or garage during the winter.
Before you prepare your MissionTM RTKn for winter hibernation, we recommend you:

• Thoroughly clean your MissionTM RTKn
• Fully charge the battery
• Turn the power off

To maximize the battery life, fully charge the battery before storage during winter.
WARNING: Protect the underside of MissionTM RTKn from water. NEVER store MissionTM RTKn upside down outdoors.
NOTE: When bringing the MissionTM RTKn back to work after winter hibernation, make sure the charging strips and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the app, make sure the date and time are correct and send MissionTM RTKn back to what it loves doing: mowing.

Replacing the battery

WARNING: Power off before attempting any adjustment, replacement or repair. Before replacing the blades, turn your MissionTM RTKn OFF and put on protective gloves.
If you need to replace the battery, follow these steps: (Only for KR172E & KR173E)

1. Gently turn your MissionTM RTKn upside down.
2. Remove the screws on the battery cover. Remove the battery cover.
3. Remove the screws on the sheet metal. Remove the sheet metal.
4. Press the latch and release the connectors as the picture shows. Lift out the battery box carefully.
   • NOTE: Do not pull by the cables. Hold the connectors and release the latch.
5. Open the battery box then lift out the battery carefully. Replace the old battery with the new one.
6. Put the battery box back in its position and plug the connectors. Refit the sheet metal.
7. Place the cover back in its position and tighten the screws.

If you need to replace the battery, follow these steps: (Only for KR174E)

1. Gently turn your MissionTM RTKn upside down.
2. Remove the screws on the battery cover. Remove the battery cover.
3. Remove the screws on the sheet metal. Remove the sheet metal.
4. Unplug the connector. Replace the old battery with the new one. Then plug in the connector.
5. Refit the sheet metal. Place the cover back in its position and tighten the screws.

Troubleshooting

If your MissionTM RTKn does not work correctly, follow the troubleshooting guide below. If the fault persists, contact your dealer.

Environmental protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice

Declaration of conformity

We, Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany On behalf of Positec declare that the product Description Robotic Lawnmower Type KR172E KR173E KR174E (100-199- designation of machinery, representative of Robotic Lawnmower) (Year, article number and month of serial number are placed on the back page. The complete serial number is clearly stated on the enclosure of lawnmower) with battery charger KA0200 / KA0201/ KA3710 / KA3711 /KA3719 / KA3819 and charging base KA0074 Function Cutting grass Complies with the following Directives, 2006/42/EC, 2014/30/EU, 2014/35/EU, 2011/65/EU&(EU)2015/863, 2000/14/EC amended by 2005/88/EC, 2014/53/EU

• 2000/14/EC amended by 2005/88/EC KR172E KR173E KR174E
• Conformity Assessment Procedure as per Annex V Annex V
• Measured Sound Power Level 55.5 dB (A) 58.3 dB (A)
• Declared Guaranteed Sound Power Level 59 dB (A) 61 dB (A)

KR172E KR173E KR174E

• The notified body involved
• Name: Intertek, Semko AB (notified body0413)
• Address: Torshamnsgatan 43164 22 Kista Sweden

GeoTrace:

• The notified body involved
• Name: TIMCO ENGINEERING, Inc (notified body CE1177)
• Address: 849 NW State Road 45, Newberry, Florida 32669, USA

Standards conform to,

• EN 60335-1:2012+A11+A13+A1+A14+A2:2019+A15:2021, EN 50636-2-107:2015+A1+A2:2020+A3:2021,
• EN 60335-2-29:2004+A2+A11:2018, EN 62233:2008, EN 55014-1:2017+A11:2020,
• EN 55014-2:2015, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, EN ISO 3744:2005,
• EN 300 328 V2.2.2, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN IEC 62311:2020,
• EN 55011:2016+A11:2020

The person authorized to compile the technical file,

• Name Marcel Filz
• Address Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany2022/09/02
• Allen Ding
• Deputy Chief Engineer, Testing & Certification
• Positec Technology (China) Co., Ltd.
• 18, Dongwang Road, Suzhou Industrial
• Park, Jiangsu 215123, P. R. China
• www.kress-robotik.com.

References

• Home - KRESS Robotic mower and professional garden tools

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>