kogan com H2 PRO Active Noise Cancelling Wireless Earphones User Guide

June 17, 2024
Kogan com

kogan com Logo USER GUIDE H2 PRO ACTIVE NOISE CANCELLING
WIRELESS EARPHONES
KAH2PROWHTHA

SAFETY & WARNINGS

User Safety Instructions

  • To avoid any possible hearing damage, keep the volume at a moderate level.
  • Avoid listening to music at loud volume levels for prolonged periods of time, as this may cause permanent hearing damage or hearing loss.
  • Aways be aware of your surroundings while operating and do not use the earphones while driving, cycling, running or jogging or when doing any activity which requires your attention and ability to hear.
  • Even if not using, charge the earphones and the battery case at least once every 6 months, for the good life cycle of the product.
  • Store in cool and dry place. Keep away from hot and humid conditions.
  • The battery is designed to last lifecycle of the product. It should only be removed by a recycling facility. And attempt to remove or replace the batteries will damage the product and void the warranty.
  • Bluetooth products can be affected by the environment. Do not use it in environments with large electromagnetic fields / high radiation levels. The Bluetooth signal will be impacted and less than optimal performance may occur.
  • Do not use these headphones in temperatures below 0°C or above 45°C.
  • Do not use equipment in the thunderstorm weather. Thunderstorms may cause abnormal equipment operation and increase the risk of electric shock.
  • Do not place the Bluetooth earphones in water or apply excessive force on it those may cause damage to the earphones, resulting in poor sound quality.

Product Safety Warning

  • Please use an AC adaptor with max output voltage current of SV/IA. If the output voltage end current of the charger exceeds the recommended power, it may cause severe damage to the product and void the product warranty.
  • Use original charging cable for charging the storage case.
  • Charge the earphones and the battery case at least once every 6 months, for the good life cycle of the product. Store in cool and dry place, keep away from hot and humid conditions.

OVERVIEW

kogan com H2 PRO Active Noise Cancelling Wireless Earphones -
Fig

  1. Multi-function button (MFB)
  2. Microphone
  3. Indicator (earphone)
  4. Reset button
  5. Indicator (charging case)

OPERATION

Power on/off

  • To power on the earphones, open the charging case lid, the earphones will automatically turn on.
  • To power off the earphones, place them back in the charging case and close the lid.
    Note: The headphones can also be manually turned on/off by pressing and holding the MFB for 5 seconds.
    ‘When the charging box has low battery/ flat, the earphones will not automatically power off when they are placed in the charging case. You need to manually turn off the earphones.

Inter-connect the Earphones.

  • Ensure that earphones are charged.
  • Firstly, remove both earphones from the charging case, earphones will turn on and enter the auto inter pairing mode. After a few seconds both earphones are inter connected. You will hear a prompt tone when the connection is successful.
  • To reactivate inter-pairing mode, simply put the earphones back in charging case and close the cap, wait few seconds and the follow the above procedure again.

Bluetooth Pairing
After the interconnection is successful, the earphones are ready to pair with your Bluetooth enabled device.

  • Turn on the Bluetooth function on your device and search for “R9 Pro” in the Bluetooth menu. Select “Kogan H2 Pro Earphones” and you will hear a prompt tone when pairing is successful.
  • Once the connection is successful, you can start using the earphones.
  • To disconnect, simply put the earphones back in the charging case and the earphones will automatically disconnect from any paired devices.
  • To reconnect the earphones with same device, simply remove the earphones from charging case and the earphones will automatically connect to device. (Make sure that the Bluetooth is turned on the device.) To stop the TWS earphones to auto connect to any device, delete the earphones from the Bluetooth menu of that device.
  • To enjoy calls, music and audio output from your device to the TWS earphones, make sure that the media connection for both calls and media files is activated in the Bluetooth menu.

Using the Multi-Function Button (MFB)

Function| Right earphone (L)|

Right earphone (R)

---|---|---
Play/Pause| Touch once| Touch once
Previous song| Touch twice| –
Next Song| –| Touch twice
Volume +| –| Touch and hold
Volume –| Touch and hold| –
Answer call| Touch once| Touch once
End call| Touch once| Touch once
Reject call| Touch and hold for 3 seconds| Touch and hold for 3 seconds
Voice assistant| –| Touch three times
ANC on/of| Touch three times| –

Resetting the Earphones

  • Open the lid on the charging case.
  • Long press the reset button at bottom of the charging case for 5 seconds.
  • The green indicator next to button blinks 3 times, then close the case lid and open again. The earphones will reset.

Charging the Earphones
Place the earphones in the charging case and close the lid, a red indicator will turn on inside each earphone when charging. The light will turn off when the earphones are fully charged.
Charging the Battery Case
Plug the USB-C charging cable into the USB-C port in the charging case. Connect the other end of the charging cable to

  • DC5V/1A power source (phone charger).
  • The indicators on the bottom of charging case will be solid red while charging. When charging is complete the indicators will turn off.

Power Save mode
The earphones will automatically turn off after 5 minutes if not connected to a device.
Low Battery
When battery level is below 5% you will hear an audio prompt “battery low”. The message is repeated every 2 minutes.
After approximately 5 minutes the earphones will power off autormnatically.

SPECIFICATIONS

Bluetooth version Bluetooth 5.3
Earphone battery 40mAhx2
Charging case battery 380mAh
Speaker diameter ©10mm (x2)
Charging time Earphones: 1.5 hrs
Earphone working time Charging case; 2 hrs
Charging case working time ANC off: Approx. 6 hrs based on 70% volume

ANC on: Approx. 5 hrs based on 70% volume
ANC Off: 18 extra hrs in the charging case
Earphone size| ANC On: 15 extra hrs in the charging case 31.5×23.4×15.8mm
Earphone weight| 3.9g each
Charge box size| 611×27.3×40.5mm
Weight| 279
Charging Port| Use-C

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Kogan com User Manuals

Related Manuals