Worx WG737E Cordless Brushless Push Lawn Mower Instruction Manual

Worx WG737E Cordless Brushless Push Lawn Mower

SAFETY INSTRUCTIONS PRODUCT SAFETY GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
• Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories tool bits, etc. by these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause an explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

LAWNMOWER SAFETY WARNINGS

• Do not use the lawnmower in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
• Thoroughly inspect the area for wildlife where the lawnmower is to be used. Wildlife may be injured by the lawnmower during operation.
• Thoroughly inspect the area where the lawnmower is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Thrown objects can cause personal injury.
• Before using the lawnmower, always visually inspect to see that the blade and the blade assembly are not worn or damaged. Worn or damaged parts increase the risk of injury.
• Check the grass catcher frequently for wear or deterioration. A worn or damaged grass catcher may increase the risk of personal injury.
• Keep guards in place. Guards must be in working order and be properly mounted. A guard that is loose, damaged, or is not functioning correctly may result in personal injury.
• Keep all cooling air inlets clear of debris. Blocked air inlets and debris may result in overheating or risk of fire.
• While operating the lawnmower, always wear non-slip and protective footwear. Do not operate the lawnmower when barefoot or wearing open sandals. This reduces the chance of injury to the feet from contact with the moving blade.
• While operating the lawnmower, always wear long trousers. Exposed skin increases the likelihood of injury from thrown objects.
• Do not operate the lawnmower in wet grass. Walk, never run. This reduces the risk of slipping and falling which may result in personal injury.
• Do not operate the lawnmower on excessively steep slopes. This reduces the risk of loss of control, slipping, and falling which may result in personal injury.
• When working on slopes, always be sure of your footing, always work across the face of slopes, never up or down, and exercise extreme caution when changing direction. This reduces the risk of loss of control, slipping, and falling which may result in personal injury.
• Use extreme caution when reversing or pulling the lawnmower towards you. Always be aware of your surroundings. This reduces the risk of tripping during operation.
• Do not touch blades and other hazardous moving parts while they are still in motion. This reduces the risk of injury from moving parts.
• When clearing jammed material or cleaning the lawnmower, make sure all power switches are off and the battery pack is disconnected. Unexpected operation of the lawnmower may result in serious personal injury.

SAFETY WARNINGS FOR BATTERY PACK

• Do not dismantle, open or shred cells or battery packs.
• Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Do not expose the battery pack to heat or fire. Avoid storage in direct sunlight.
• Do not subject the battery pack to mechanical shock.
• In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Keep the battery pack clean and dry.
• Wipe the battery pack terminals with a clean dry cloth if they become dirty.
• The battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
• Do not maintain the battery pack on charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
• Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
• Do not use any battery pack which is not designed for use with the equipment.
• Keep battery packs out of the reach of children.
• Retain the original product literature for future reference.
• Remove the battery from the equipment when not in use.
• Dispose of it properly.
• Do not mix cells of different manufacture, capacity, size or type within a device.
• Keep the battery away from microwaves and high pressure.
• Warning! Do not use non-rechargeable batteries.

SYMBOLS

COMPONENT LIST

1. SWITCH LEVER
2. UPPER HANDLE
3. BAG HANDLE
4. SAFETY FLAP
5. GRASS COLLECTION BAG
6. LOWER HANDLE LOCK COVER
7. CUTTING HEIGHT ADJUSTMENT KNOB
8. FRONT CARRY HANDLE
9. BATTERY PACK COVER
10. REAR CARRY HANDLE
11. HANDLE KNOB, LOWER
12. LOWER HANDLE
13. CABLE CLIP
14. HANDLE KNOB, UPPER
15. LOCK-OFF BUTTON
16. GRASS BAG INDICATOR
17. MULCHING INSERT
18. BATTERY PACK* (SEE FIG. E)
19. POWER INDICATOR LIGHT(SEE FIG. F1)
20. BLADE BOLT (SEE FIG. L1)
21. BLADE (SEE FIG. L1)

Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL DATA

Type WG737E WG737E.X (7- designation of machinery, representative of Cordless Lawn Mower)

• X=1-999, A-Z, M1-M9 they are only used for different customers, there are no safe relevant changes between these models.
• Voltage measured without workload. The initial battery voltage reaches a maximum of 20 volts. The nominal voltage is 18 volts.

SUGGESTED BATTERIES AND CHARGERS

20V Battery

| WA3014| 4.0 Ah
WA3644| 4.0 Ah
20V Charger| WA3772| 2.0 A

We recommend that you purchase your accessories from the same store that sold you the tool. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

NOISE DATA

VIBRATION INFORMATION

WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on how the tool is used depending on the following examples and other variations on how the tool is used: How the tool is used and the materials being cut or drilled.

The tool is in good condition and well-maintained. Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti-vibration accessories are used. And the tool is being used as intended by its design and these instructions.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not doing the job. This may significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk. ALWAYS use sharp chisels, drills, and blades. Maintain this tool under these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti-vibration accessories. Plan your work schedule to spread any high-vibration tool use across many days.

INTENDED USE

• This product is intended for domestic lawn mowing.

OPERATION INSTRUCTIONS

NOTE: Read the instruction handbook before operating this machine.

ASSEMBLY & OPERATION

Assembling the handlebar. NOTE: Choose the appropriate height and tighten the handle knobs.| See Fig. A1, A2, A3, A4
Assembling grass collection bag.| See Fig. B1, B2, B3
ACTION| FIGURE
---|---
ASSEMBLY|
Assembling the handlebar. NOTE: Choose the appropriate height and tighten the handle knobs.| See Fig. A1, A2, A3, A4
Assembling grass collection bag.| See Fig. B1, B2, B3
Adjusting the cutting height WARNING! Stop, release the switch lever, and wait until

the motor stops before adjusting the height. The blades continue to rotate after the machine is switched off, a rotating blade can cause injury. Do not touch rotating blades.

| See Fig. G
---|---
Grass Bag Filling Indicator

Empty status: flap floats (a)

Fully status: flap falls (b)

| See Fig. H1
Removing/emptying grass

collection bag.

WARNING! Always check

the safety flap close the discharge outlet before using. Never lift the safety flap when the mower is being used without a fitted grass collection bag.

| See Fig. H2
Storage| See Fig. I1, I2

BATTERY STATUS

• Before starting or after use, press the button beside the power indicator light on the machine to check the battery capacity.
• During operation, the battery capacity will be indicated automatically by the battery power indicator. The indicator constantly senses and displays the battery condition as follows.
• Charge the machine with 2 battery packs with different AH, the power indicator light displays the battery condition with the lower one of the two batteries.

charged condition.
Two, three, or four green lights are illuminated.| The two batteries have a remaining charge. The more lights are illuminated, the more battery capacity.
Only one green light ( ) is

illuminated.

| The battery level of at least one battery pack is very low. Please check and charge the battery pack.
---|---
No light is illuminated.| At least one battery is not fully installed or the battery may be defective.

Only one light is flashing twice per cycle.

| At least one battery is over-discharged (please refer to the battery charge condition), please recharge the two batteries at once before use again or storage.
Only one light is flashing three times per cycle.| At least one battery is hot, wait for them to cool down before starting again.
Only one light is flashing four times per cycle.| The machine is overloaded. Raise the cutting height or push slowly.

MULCHING MOWING TIPS

NOTE: ALWAYS INSPECT THE AREA WHERE THE MOWER IS TO BE USED AND REMOVE ALL STONES, STICKS, WIRE, METAL, AND OTHER DEBRIS THAT MIGHT BE THROWN BY THE ROTATING BLADE.

1. Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes. Do not mow excessively steep slopes. Always maintain good footing.
2. Release the switch lever to turn the mower “OFF” when crossing any graveled area (stones can be thrown by the blade).
3. Set the mower at the highest cutting height when mowing in rough ground or tall weeds. Removing too much grass at one time can cause a circuit breaker to trip, which stops mower.
4. If a grass bag is used during the fast-growing season, the grass may tend to clog up at the discharge opening. Release the switch lever to turn the mower “OFF”. Remove the grass bag and shake the grass down to the back end of the bag. Also, clean out any grass or debris that may be packed around the discharge opening. Replace the grass collection bag.
5. If the mower should start to vibrate abnormally, release the switch lever to turn the mower “OFF”. Check immediately for cause. Vibration is a warning of trouble. Do not operate the mower until a service check has been made.
6. ALWAYS RELEASE THE SWITCH LEVER TO TURN THE MOWER “OFF” WHEN LEAVING IT UNATTENDED EVEN FOR A SHORT TIME.

TIPS

1. It is recommended to mow your lawn more frequently, walk at a normal pace, and not to start/ stop the mower too often during operation. Please always use the same two batteries and charge the two batteries at the same time.
2. For best performance, please ensure to use 2 fully charged battery packs at the same time and always cut off 1/3 or less of the grass height.
3. Walk slowly when cutting long grass, to have more effective cutting and properly discharge the clippings.
4. Avoid cutting wet grass, otherwise, it will stick to the underside of the deck and the clippings cannot be collected or discharged properly.
5. A higher cutting height shall be applied to new or thick grass and it will extend the battery duration.

STORAGE

Stop the mower. Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all grass and debris, especially from the ventilation slots. Turn the machine on its side and clean the blade area. If grass cuttings are compacted in the blade area, remove with a wooden or plastic implement. Store the machine in a dry place. Do not place other objects on top of the machine. To aid storage, release the handle knobs, and fold the upper handle as shown in Fig. I1 & I2.

MAINTENANCE

WARNING! Stop the mower before removing the grass bag.

NOTE: To ensure long and reliable service, perform the following maintenance procedures regularly. Check for obvious defects such as loose, dislodged, or damaged blades, loose fittings, and worn or damaged components. Check that the covers and guards are all undamaged and are correctly attached to the mower. Carry out any necessary maintenance or repairs before operating the mower. If the mower should happen to fail despite regular maintenance, please call our customer helpline for advice.

BLADE SHARPENING
KEEP THE BLADE SHARP FOR THE BEST MOWER PERFORMANCE.
WEAR PROPER EYE PROTECTION WHILE REMOVING, SHARPENING, AND INSTALLING BLADE.
Sharpening the blade twice during a mowing season is usually sufficient under normal circumstances. Sand causes the blade to dull quickly. If your lawn has sandy soil, more frequent sharpening may be required.

WHEN SHARPENING THE BLADE:

1. Make sure the blade remains balanced.
2. Sharpen the blade at the original cutting angle.
3. Sharpen cutting edges on both ends of the blade, removing equal amounts of material from both ends.

NOTE

1. Be sure the mower is turned off.
2. Place the mower in stand-up storage mode.

TO SHARPEN BLADE IN A VISE (SEE Fig. J)

1. Be sure the switch lever is released, the blade has stopped before removing the blade.
2. Remove the blade from the mower. See instructions for removing and attaching the blade.
3. Secure blade J-1 in a vise J-2.
4. Wear safety glasses and be careful not to cut yourself.
5. Carefully file the cutting edges of the blade with a fine tooth file J-3 or sharpening stone.
6. Check the balance of the blade. See instructions for blade balancing.
7. Replace the blade on the mower and tighten it securely. Refer to the instructions below.

BLADE BALANCING (See Fig. K)
Check the balance of the blade by placing the center hole in blade K-1 over a screwdriver shank K-2, clamped horizontally in a vise K-3. If either end of the blade rotates downward, file that end. The blade is properly balanced when neither end drops.

BLADE MAINTENANCE (See Fig. L1, L2)
Renew your metal blade after 50 hours of mowing or 2 years, whichever is the regardless of condition. Follow these procedures to remove and replace the blade. You will need garden gloves (not provided) and a spanner wrench (not provided) to remove the blade. Hold the blade (21) and unscrew the blade bolt (20) counter-clockwise using a spanner wrench, and then remove the blade. To re-assemble, position the blade (21) with the cutting edges towards the ground. Then securely tighten the blade bolt (20).

ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling advice.

FOR BATTERY TOOLS

• The ambient temperature range for the use and storage of tools and batteries is 0 °C-45 °C.
• The recommended ambient temperature range for the charging system during charging is 0 °C-40 °C.
• Details regarding safe disposal of used batteries
• At the end of the life of the appliance, remove the battery pack safely before disposing of the appliance. Do not throw batteries away or throw them in the normal trash can. Also, do not dispose of the battery with the machine.
• Remove the used battery pack from the appliance and dispose of it at the nearest or convenient dedicated recycling facility. If in doubt, consult your local environmental protection department. Batteries may enter the water cycle if disposed of improperly, which can be hazardous for the ecosystem.
• Do not dispose of waste batteries as unsorted municipal waste.

TROUBLESHOOTING

WARNING: SWITCH THE MACHINE OFF AND REMOVE THE BATTERY BEFORE ANY TROUBLESHOOTING.

Cordless Brushless Push Lawn Mower

switch lever to turn the mower off. Turn the mower over and check that the blade is free to turn. If not free, return to an authorized servicer. The blade should turn freely.

B.  Has the battery been fully charged? Plug in the charger and wait for the green light to come on.

2. Motor stops while mowing.| A. Release the switch lever to turn the mower off. Turn the mower over and check that the blade is free to turn. If not free, return to an authorized servicer. The blade should turn freely.

B.  Raise the cutting height of the wheels to the highest position and start the mower.

C. Has the battery been fully charged? Plug in the charger and wait for the green light to come on.

D. Avoid overloading the mower. Slow down the cutting pace by pushing the mower slower or raising the cut height. Or both.

3. Mower runs but cutting performance is unsatisfactory, or does not cut the entire lawn.| A. Has the battery been fully charged? Plug in the charger and wait for the green light to come on.

B.  Release the switch lever to turn the mower off. Turn the mower over and check the blade for sharpness – Keep the blade sharp. Deck and discharge chute for clogging.

C. Wheel height adjustment may be set too low for grass condition. Raise

cutting height.

4. The mower is too hard to push.| A. Raise cutting height to reduce deck drag on grass. Check each wheel for free rotation.
5. The mower is abnormally noisy and vibrates.| A. Release the switch lever to turn the mower off. Turn the mower on the side and check the blade to ensure it has not been bent or damaged. If the blade is damaged, replace it with a replacement blade. If the underside of the deck is damaged return the mower to an authorized service center.

B.  If there is no visible damage to the blade and the mower still vibrates: Release the switch lever to turn the mower off, and remove the blade. Rotate the blade 180 degrees and retighten. If the mower still vibrates, return the mower to an authorized service center.

6. The battery charger LED is not on.| A. Check plug connection.

B.  Replace charger.

7. Battery charger LED does

not flip to green.

| A. Battery needs to be diagnosed. Take to authorized service center.
8. The mower not picking up clippings with the grass collection Bag.| A. Remove the mulch plate when bagging.

B.  Chute clogged. Release the switch lever to turn the mower off. Clear chute of grass clippings.

C. Too much cut grass. Raise the cutting height of the wheels to shorten the length of the cut.

D. Bag full. Empty bag more often.

9. When mulching there are clippings visible.| A. Too much cut grass. Raise the cutting height of the wheels to shorten the length of

the cut. Do not cut off more than 1/3 of the total length.

B.  Check the blade for sharpness. Always keep the blade sharp.

10. Low or diminished run-time after many uses.| A. Return to authorized service location – may need a new battery.
11. The battery charger LED flashes red and the battery can’t be charged.| A. The battery overheats after continuous use. Remove the battery from the charger and allow it to cool to 42 0C or less.

Cordless Brushless Push Lawn Mower

DECLARATION OF CONFORMITY

• We,

• Positec Germany GmbH

• Postfach 32 02 16, 50796 Cologne, Germany

• On behalf of Positec declare that the product

• Description Cordless Lawn Mower

• Type WG737E WG737E.X (7- designation of

• machinery, representative of Cordless Lawn Mower)

• Function mowing grass

• Complies with the following Directives,

• 2006/42/EC, 2014/30/EU

• 2011/65/EU&(EU)2015/863

• 2000/14/EC amended by 2005/88/EC

• 2000/14/EC amended by 2005/88/EC

• Conformity assessment procedure as per Annex VI.

• Measured Sound Power Level 92.4 dB(A)

• Declared Guaranteed Sound Power Level 96 dB(A)

• The notified body involved

• Name: TÜV Rheinland LGA Products GmbH

• (notified body 0197)

• Address: Tillystraße 2-90431 Nürnberg

• Standards conform to,

• EN 62841-1, EN IEC 62841-4-3, EN ISO 3744, EN

• IEC 55014-1, EN IEC 55014-2, EN IEC 63000

• The person authorized to compile the technical file,

• Name: Marcel Filz

• Address Positec Germany GmbH

• Postfach 32 02 16, 50796 Cologne, Germany

• 2023/08/28

• Allen Ding

• Deputy Chief Engineer, Testing & Certification

• Positec Technology (China) Co., Ltd

• 18, Dongwang Road, Suzhou Industrial

CONTACT

• Importer: KVT Expert LLC
• Address: Russia, Moscow, 119607, Michurinsky Avenue, building 31, building 7, room 40/2
• Phone: +7 (495) 107-02-72
• Email [email protected].
• Country of origin: China
• Manufacturer: Positek Technology (PRC) Co., Ltd.
• Address: Room 18, Dongwang Road, Suzhou Industrial Park, Jiangsu, China
• Product service life: 6 years
• Warranty period: 2 years
• Date of manufacture of the product: indicated on the product
• Authorized person to accept claims: LLC “POZITEK-EURASIA”
• Address: Russian Federation, 117342, Moscow, st. Butlerova, 17, floor 3 room 67
• Customer service phone number of LLC “POZITEK-EURASIA”: +7 (495) 136-83-96
• Email [email protected].
• www.worx.com.

Copyright © 2023 Positec. All Rights Reserved. V0-18L-WG737E WG737E.X-M-20231012

References

• Lawn & Garden Equipment | Innovative Power Tools | WORX

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>