LOYOELE B0CBDRCMGX Solar Street Light User Manual
- June 17, 2024
- Loyoele
Table of Contents
LOYOELE B0CBDRCMGX Solar Street Light
Specifications
- Product: LOYOELE Solar Light
- Size: 21.6 Inch
- Package Includes:
- Solar light
- Open spanner
- Fixing arm pole
- Battery
- Backplate for pole mounting
- Wall mount bolts
- Backplate for luminaire mounting
- Long bolts for pole mounting
- Remote control
- Short bolts for luminaire mounting
Product Usage Instructions
Wall Mount Installation
- Mark the hole location on the wall.
- Drill 4 holes in the wall according to the position of the bracket’s hole.
- Knock the bolts into the wall.
- Mount the light, lock the screws, and tighten them.
Pole Mount Installation
- Secure the light to the pole with the long bolt and backplate.
- Tighten the long bolt securely.
Led Indicator Meaning
- Remote Control Receiver Power Display: Long press until the light turns on.
- Battery Capacity Indicators:
- 20% – Motion Sensor Mode
- 40%
- 60%
- 80%
- 100%
FAQ
- How does your solar-powered fixture work?
- The solar panel on the fixture absorbs sunlight during the day to charge the battery. The battery powers the light at night, and sensors may activate different brightness modes based on motion detection.
Warm Tips
- Step1: Turn on the switch (Long Press Button)
- Step2: Charging 2 hours under the sunlight
- Step3: Test the remote controller work or not
Note: Remote control is pointed at the receiver)
Follow the instructions when you received
-
Block the light sensor part (solar panel) and Turn on the switch (Long Press Button).
-
Charging for 2 hours under the sunlight.
The indicator light flashes to indicate that it is charging, the color of the fully charged indicator light is 2 red lights + 2 blue lights + 1 green light (Indicator no longer flashes) -
Test whether the remote controller works or not.
(Note: Remote control is pointed at the receiver)
Package
- Solar light
- Fixing arm pole
- Backplate for pole mounting
- Backplate for luminaire mounting
- Remote control
- Open spanner
- Battery
- Wall mount bolts
- Long bolts for pole mounting
- Short bolts for luminaire mounting
Installation
Wall Mount
ON THE WALL
- Step 1: Mark the hole location, Drill 4 holes in the wall according to the position of the bracket’s hole.
- Step 2: Knock the bolts into the wall.
- Step 3: Mount the light, lock the screws and tighten them.
Pole Mount
ON THE POLE
- Step 1: Secure the light to the pole with the long bolt and back plate.
- Step 2: then tighten the long bolt.
LedIndicator meaning
Power display meaning
When fully charged, all indicator lights will be on (2 red lights 2 blue lights 1 green light), the color of the battery indicator will not change.
Remote Control Buttons
Please insert the 2 batteries ((1.5 V AAA type). Make sure that the positive and negative ends are facing in the correct direction. the control distance of remote is 35ft.
-
When you press the button ON, the solar street light will be 100% bright.
-
When you press the button OFF, the solar street light will be turned off and cannot be turned on automatically until the next day. (Tips: You need to press ( )on the light body to turn off the solar street light completely.)
-
Motion Sensor Mode: When motion is detected, the brightness increases to 100%.
When there is no motion, it is stationary for about 10-20 seconds and the brightness returns to 30%. -
Timed Lighting: Timed 100% brightness Lighting 2/3/5/6/8 hours without radar sense motion function.
-
Brightness level: you can set up the brightness level ( 25% / 50%/ 75%/ 100%) of the light.
Motion Sensor Mode
How does your solar-powered fixture work?
-
During the day, the sun converts sunlight into electricity and recharges thebattery.
At night, the light turns on automatically using the electricity stored during that day. -
The number of hours the lights depends on your geographicallocations, weather conditions, and seasonal sunlight availability.Also. it depends on the lighting time you choose.
-
Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations should not be near lights. These may cause the solar light to turn off prematurely.
Precautions
-
First time of use, place the solar light in a location where it can receive a full hour of sunlight to allow the rechargeable battery to reach maximum capacity.
-
Then put the solar panel in the sun to charge
Please choose a position without any shelter for enough sunshine and the solar panel should be fully exposed to the sun. -
Keep the solar panel surface clean, this helps speed up charging. It is suggested to clean the solar panel for a while.
-
The light will turn off after running out of battery, especially in areas that lack sunlight, in cloudy winter, and during long rainy weeks. If such a problem occurs. first press OFF charge the solar panel for two days and then turn on .
-
Test light control: After blocking the solar panel, press the “ ” button, and the lighting; the solar panel is facing the sunlight, the light is off, then the light control is normal.
Troubleshooting
- If the light does not turn on at dusk after 8 hours of charging:*Ensure that the solar light fixture is in a bright sunny location and not ina shady area during the day.
- Make sure that the solar light fixture is turned on(Auto)
- Make sure that the remote control battery has power.
- If the above faults are eliminated, it may be that the solar battery needs to be replaced or the controller is faulty. Please contact me in time.
Warranty
We provide our customers with a warranty of 12 months from the date of purchase.
- Thanks so much for choosing our solar street light.
- For any further questions, please email us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>