RitFit HTM-800 Hip Thrust Machine User Manual
- June 17, 2024
- Ritfit
Table of Contents
HIP THRUST MACHINE
HTM-800
OWNER’S MANUAL & ASSEMBLY INSTRUCTIONS
SAFETY & PRECAUTIONS
IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT.
RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
-
In the event should you find this product has either a defective or a missing part, do not use substitute parts or try to use the unit in an incomplete form. Please contact RITFIT for a replacement.
-
Additional features on products may be added during seasonal production but may not be fea tured in line art diagrams at time of production. Changes of such will not affect the performance or assembly of the unit. If you would like further clarification during your assembly process please feel free to contact RITFIT for direction.
-
This product has been designed for light com mercial or home use only. Light commercial can be defined as a location with multiple users but not in a membership setting. Examples would be hotels, fire departments, high schools, etc.
Commercial use would include, but not limited to, locations that accept membership for use of equipment. -
This exercise equipment was designed and built for optimum safety. However certain operator precautions apply whenever you operate a piece of exercise equipment. Please note the following safety procedures:
- Keep children and pets away from this equipment.
- Always inspect equipment prior to assure the structu al integrity. Some parts may need occasional mainte nance due to wear and tear.
- One person at a time should use this equipment unless otherwise designed for safety (example: spot ter stand on some weight benches).
- If dizziness, nausea, chest pains, or any other abnor mal symptoms are experienced while using this equipment, stop the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
- Always use this equipment on a level surface. Do not use it outdoors or near water.
- Do not insert any object into any openings unless object is supposed to be inserted into a particular place (such as a pin in a weight stack).
- Before using this equipment, always do stretching exercise to warm up.
- Use this equipment only for its intended use as described in manual.
- Always wear appropriate workout clothing and shoes when exercising. DO NOT WEAR ROBES OR OTHER CLOTHING THAT COULD BECOME CAUGHT IN THE EQUIPMENT.
- BEFORE BEGINNING ANY EXERCISE PROGRAM, CON SULT YOUR PHISICIAN.
- If you have any question, please e-mail our customer service team at support@ritfitsports.com.
CARE AND MAINTENANCE
– Inspect and tighten all parts before using the equipment.
– The equipment can be cleaned using a damp cloth and mild non-abrasive
detergent. DO NOT use solvents.
– Examine the equipment regularly for signs of damages or wear.
– Replace any defective components immediately and/or keep the equipment out
of use until repair.
– Failure to examine regularly may affect the safety level of the equipment.
WARRANTY
HIP THRUST MACHINE WARRANTY
What’s Covered Under RitFit LLC’s Basic Warranty?
– Basic Warranty.
A. Who Is Covered?
You are covered by the Basic Warranty if you are a purchaser for use of the
RitFit Hip Thrust Machine.
B. What’s Covered?
The Basic Warranty covers the cost of all parts and labor needed to repair any
item on your Hip Thrust Machine that is defective in material workmanship or
factory prearation after leaving the manufacturing plant. These warranty
repairs or adjustments will be
made by RitFit at on charge, using new or remanufactured parts.
C. When It Begins?
The Basic Warranty begins on the day of order.
D. When It Ends?
The Basic Warranty lasts for 12 months from the date it begins.
E. What’s Not Covered?
Please note thar while the standard Basic Warranty applies to defects in
material and/or workmanship, it does not cover the Hip Thrust Machine matte
finish appearance. Maintaining the matte finish appearance is solely the
responsbility of the owner. Basic Warranty doesn’t cover damage caused by
environmental factors such as airborn fallout, insect damage, chemicals, salt,
and ocean spary. Nor do your warranty cover damage caused by hailstorms,
windstorms, tornadoes, sandstorms, lightning, floods, and arthquakes. Your
warranty does not cover conditions resulting from anything impacting the Hip
Thrust Machine.
F. How To Contact Us?
To ensure you receive the best technical support please visit
www.ritfitsports.com and register your
warranty. Customers with registered warranties are given a profile that allows
for easier support and for us to contact you with important product
notifications. If any parts are missing, worn, damaged or broken before the
assembly, or you ever need to replace the parts, please contact us at
support@ritfitsports.com.
BEFORE YOU BEGIN
Thank you for selecting the versatile RitFit® Hip Thrust Machine. RitFit® Hip
thrust Machine is designed and manufactured to optimize users’ workout
performance of hip muscle training.
For your benefit, read this manual carefully before using the Hip Thrust
Machine. If you have additional questions, please call our Customer Service
Department at +1315 636 0959, 9:00 am – 5:00 pm PST (Mon.-Fri.). To help us
assist you, please note the product model number and serial number before
calling. The model number is HTM-800.
BEFORE READING FURTHER, PLEASE REVIEW THE DRAWING BELOW AND FAMILIAR IZE
YOURSELF WITH THE PARTS THAT ARE LABEIJED.
PARTS LIST
Packed in the box
No. | Description | Quantity |
---|---|---|
1 | RLiegfhttBBeeaamm | 1 |
2 | Rubb Mat Support | 2 |
3 | Triangle Fixator (Right) | 1 |
4 | Triangle Fixator (Left) | 1 |
5 | Roller Pad | |
6 | Cross Beam With Handle | 1 |
7 | Cross Beam | 1 |
No. | Description | Quantity |
---|---|---|
190 | BackBPaackd PSaudpport | 1 |
11 | Roller Pad Support | 1 |
2 | Rubber Mat | 2 |
3 | 6 | |
14 | 5mm Allen Key | 1 |
15 | Open-ended Wrench | 1 |
No. | Description | Quantity |
---|---|---|
A | M180*60 Hexagon Socket Button Head Screw | 2 |
B | M8*35 Hexagon Socket Button Head Screw | 20 |
C | M6*20 Hex Bolt | 4 |
D | M10 Washer | 8 |
E | M8 Washer | 2 |
F | M6 Washer | 44 |
G | M8 Nut | 8 |
H | 20 |
ASSEMBLY
STEP 1
No. | Description | Quantity |
---|---|---|
3 | Rubber Mat Support | 2 |
7 | Cross Beam With Handle | 1 |
8 | Cross Beam | 1 |
C | M8*35 Hexagon Socket Button Head Screw | 4 |
F | M8 Washer | 8 |
H | M8 Nut | 4 |
STEP 2
No. | Description | Quantity |
---|---|---|
1 | Left Beam | 1 |
2 | Right Beam | 1 |
B | M8*55 Hexagon Socket Button Head Screw | 12 |
F | M8 Washer | 20 |
H | M8 Nut | 8 |
STEP 3
No. | Description | Quantity |
---|---|---|
45 | Triangle Fixator (Leigfth)t) | 1 |
9 | Back Pad Support | |
10 | Back Pad | 1 |
11 | R ller Pad Supp rt | 1 |
A | M10*60 Hexagon Socket Button Head Screw | 2 |
B | M8*55 Hexagon Socket Button Head Screw | 4 |
D | M6*20 Hex Bolt | 8 |
E | M10 Washer | 2 |
F | M8 Washer | 8 |
G | M6 Washer | 8 |
H | M8 Nut | 4 |
STEP 4
No. | Description | Quantity |
---|---|---|
B | M8*55 Hexagon Socket Button Head Screw | 4 |
F | M8 Washer | 8 |
H | M8 Nut | 4 |
No. Description Quantity
STEP 5
No. | Description | Quantity |
---|---|---|
6 | Roller Pad | 1 |
12 | Rubber Mat | 2 |
END
Congratulations!
You have assembled the HIP THRUST MACHINE!
Now, you can officially start your hip training!
www.ritfitsports.com
SUBSCRIBE WEBSITE AND GET
Free Exercise Ebook
Lastest Updates
GOT A PROBLEM? GET IN TOUCH
support@ritfitsports.com
GET SOCIAL WITH US
@ritfit. sports