EcoSavers Timer Shower Coach Time User Manual
- June 17, 2024
- ECOSAVERS
Table of Contents
EcoSavers Timer Shower Coach Time
Product Information
Specifications
- Product Name: Showerhead LED
- Manufacturer: EcoSavers
- Connection: 1/2 inch screw connection
- Energy Source: Water pressure-powered internal turbine
- Minimum Water Pressure: 6.3 liters per minute
- Minimum Bar Pressure: 0.7 bar
- Power Source: No batteries required
Product Usage Instructions
Installation
- Release your existing showerhead from the shower hose by turning the connection between the showerhead and shower hose anticlockwise.
- Remove any existing rubber ring from the showerhead or shower hose. If there is no rubber ring, insert the supplied rubber ring into the shower hose connection.
- Connect your new Showerhead LED by screwing the water hose connector clockwise.
Maintenance
- To ensure proper functioning of the turbine, descale the showerhead every 3 months.
- This will help maintain the efficiency of the LED illumination.
End-of-Life Disposal
At the end of the product’s life, hand in the device for recycling at a designated recycling point. Proper disposal helps in environmental conservation.
Frequently Asked Questions (FAQ):
Q: How is the Showerhead LED powered?
- A: The Showerhead LED is powered by an internal turbine that is activated by water pressure, eliminating the need for batteries.
Q: What is the minimum water pressure required for the Showerhead LED to operate efficiently?
- A: The Showerhead LED requires a minimum water pressure of 6.3 liters per minute and a minimum bar pressure of 0.7 bar for optimal performance.
Q: How often should I describe the Showerhead LED?
- A: It is recommended to descale the Showerhead LED every 3 months to maintain the proper functioning of the turbine and LED illumination.
Showerhead LED
- EcoSavers makes water and energy-saving fun with the Showerhead LED.
Installation
- The Water Saving Shower Head has a 1/2” screw connection which is the standard for showerheads.
Step 1:
- Release your existing showerhead from the shower hose by turning the connection between the showerhead and shower hose anticlockwise.
Step 2:
- Release the existing rubber ring from the showerhead or shower hose. In some cases, no rubber ring is inserted.
- Now place the rubber ring supplied in this packing into the shower hose connection.
Step 3
- Now connect your showerhead by screwing the water hose connector clockwise.
- Now you are ready to save water and energy!
When you start showering, the showerhead will illuminate:
- 0 – 4 minutes green color
- 4 – 8 minutes blue color
- 8 – 12 minutes red color
- > 12 minutes red color flashing
- The energy needed to illuminate the LEDs is generated by an internal turbine which is powered by water pressure. No batteries are needed.
- Descale the showerhead every 3 months to ensure the proper functioning of the turbine.
- For proper operation, the showerhead requires a minimum water pressure of 6.3 liters per minute and a water pressure of at least 0.7 bar
- At the end of the product’s life, hand in the device for recycling at a recycling point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>