ECOSAVERS JQQ01PIR-01 Pir Sensor Socket Switch Instruction Manual
- June 17, 2024
- ECOSAVERS
Table of Contents
**ECOSAVERS JQQ01PIR-01 Pir Sensor Socket Switch Instruction Manual
**
INSTALLATION INSTRUCTION
Saving energy is easy with the EcoSavers PIR Sensor Socket Switch. Only when
the sensor senses moving, the connected device will be activated.
It can be used in various places like stairways, garage, or other places where
the need for electricity only is wanted when people are present.
Product features:
-
Light sensor
-
PIR (Passive InfraRed) movement sensor
-
Slide switch OFF | 24/7 | Night
Plug in the Sensor Switch and connect the device you want to control by
movement to the Sensor Switch. Move the slide button to the requested
position:
connected device permanent off
PIR sensor always active, in light and dark conditions
PIR sensor active in dark conditions only
Use movement sensor in dark and light conditions If you want to use in dark and light conditions (f.e. fans, airconditioners etc.), you need to slide the switch to the position. The connected device will switch on when movement is detected within the detection range. If no movement is detected within 3 minutes, the connected device will turn off.
Use movement sensor in dark conditions only Set the slide switch to to
activate the PIR sensor movement function. The sensor movement function will
only be active in dark condition. The integrated light sensor (1) will
activate the sensor movement function when it is getting dark. This is a
perfect solution for switching lighting, aif you only want to activate the
light in dark conditions. The Sensor Switch will switch the connected device
on when movement is detected within operation range.
If no movement is detected within 3 minutes, the connected device will turn
off.
Voltage: 230V / 50Hz
Maximum load: 16A / 3.680W
Operating angle: 100°
Operating distance: 8 meter max.
Power consumption: 0.8W
Size: 105 x 83 x 57mm
Art.nr. JQQ01PIR-01