MOOER MVP2 Harmonier Vocal Processor Pedal Owner’s Manual
- June 17, 2024
- Mooer
Table of Contents
MOOER MVP2 Harmonier Vocal Processor Pedal
Specifications
- Power Supply: 9VDC, 1.5A
- Harmony Modes: 12 pitches with 11 different modes
- Reverb: High-quality reverb for vocal performance
- Special Features: Three unique vocal tones, guitar input/output with individual effects, dual-footswitch control, optional 48V phantom power
Product Usage Instructions
Power Supply:
Connect the designated AC adapter to an AC outlet of the correct voltage (9VDC, 1.5A). Unplug the adapter when not in use or during electrical storms.
Location:
Avoid exposure to conditions that may cause deformation or damage. Maintain a suitable distance from radios and televisions to prevent interference.
Cleaning:
Clean only with a soft, dry cloth. Avoid abrasive cleansers or chemicals that may damage the unit.
Features:
- 12 pitches with 11 harmony modes
- High-quality reverb for vocals
- Three unique vocal tone settings
- Guitar input/output with individual effects
- Dual-footswitch control for quick preset-recalling
- Optional 48V phantom power
Layout
Refer to the diagram for the location and function of each component.
Instructions:
- XLR balanced output jack connects to an amplifier/speaker
- Microphone input jack connects to the microphone/external microphone amplifier
- Power port connects to the power supply
- 6.35mm output jack connects to an amplifier/speaker
- INST connects to the instrument
Notes:
- Turn on LINE IN when connecting to an external microphone amplifier
- Turn on 48V phantom power when using a condenser microphone
- Use GND/LIFT switch if there is background noise in the XLR output
Adjusting Gain Level
Rotate the GAIN knob to adjust the microphone volume level. Start at the minimum value to avoid damage from noise during plugging.
Selecting Harmony Mode:
Use the MODE knob to select between 11 different harmony modes. Refer to the provided list for details on each mode.
Adjusting Volume Level:
Rotate the LEVEL knob to set the volume level of the harmony effect.
FAQ
Q: How do I connect the unit to an amplifier?
A: Use the XLR balanced output jack to connect to an amplifier or speaker.
Q: When should I use the 48V phantom power?
A: Turn on the 48V phantom power when using a condenser microphone for optimal performance.
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct
voltage. Be sure to only use an AC adapter which supplies 9V DC, 1.5A. Unplug
the AC power adapter when not in use or during electrical storms.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
- Direct sunlight or other heat sources
- Excessively dusty or dirty locations
- High humidity or moisture
- Magnetic fields
- Strong vibrations or shocks
Radio Frequency Interference
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.Do
not use abrasive cleanser, cleaning alcohol, paint thinners, wax,solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Feature
- 12 pitches with 11 different harmony mode
- High-quality reverb specifically designed for vocal performance
- Three unique vocal tones settings to choose from
- Guitar in/out with individual guitar reverb effect
- Dual-footswitch control, FAVORITE feature for quick preset-recalling
- Optional 48V phantom power
- Can be used as a microphone amplifier in the LINE IN, or a traditional stompbox with VP series pedals
- Two different output modes for mixed signal or individual signal from guitar and microphone
Layout
-
ON/OFF
Press to turn On/Off the pedal -
FAVORITE
Press to recall the presets quickly -
INST
Instrument inputjack -
OUTPUT
6.35mm unbalanced output jack -
SHARP
Semitone tone mode -
MODE
Rotate to select between 11 different harmony modes -
KEY
Scale selection -
LEVEL
Rotate to adjust the volume level of the harmony effect -
DC IN
Connect to the power supply -
48V
On/off of 48V phantom power -
LINE IN
Toggle to switch between different impedance values for the microphone signal -
MIC
Microphone balanced input jack -
GAIN
Rotate to adjust the gain level of the microphone signal -
XLR OUT
Balanced output jack -
GND/LIFT
Grounding switch for XLR balanced output signal
Instructions
- Notes: Please turn the LINE IN On, when connecting to the external microphone amplifier,
- Turn On the 48V phantom power while a condenser microphone is connected.
- If there is background noise in the XLR output, users can try turning the GND/LIFT to GND to reduce the noise caused by not grounding properly.
Adjust the gain level of the microphone input
Rotate the GAIN knob to adjust the microphone volume level. It is recommended
to rotate the GAIN to the minimum value before plugging a microphone to avoid
the damage caused by the noise during the plugging process.
Edit the harmony effect
Select keynote
Selecting a correct keynote can help to get an accuracy harmony effect.
Harmonier provides 12 different keynotes.
Rotate the KEY to select the keynote from C. D. E. F. G. A. B. Press the SHARP
to get a sharp semitone (RED LED for SHARP Off; BLUE LED for SHARP On) from
C, #D, #E(F), #F, #G, #A, #BO.
Press the SHARP twice quickly to switch to minor scale, the LED will blink quickly; press SHARP once to switch to major scale, and the button LED will stop blinking.
Select harmony mode
Rotate the MODE to select between different harmony modes. Harmonier provides
11 different harmony modes, please refer to the list below for details:
| | |
---|---|---|---
Num
1
2
| Harmony mode
OCT-
5th L
| Num
7
8
| Harmony mode
OCT- & OCT+
5th L & 3rd H
3| 3 L| 9| 5 L & 5 H
4| rd
3 H
| 10| th th
3 L & 3 H
5| rd
5 H
| 11| rd rd
6| th
OCT+
| | 3rd H & 5th H
| | |
Below is an example of when a C keynote is selected.
Adjust volume level
Rotate the LEVEL to adjust the volume level of the harmony effect.
Preset saving and recalling
Saving: After the harmony editing is complete, press and hold the FAVORITE
footswitch for more than 1 second, the footswitch LED will blink quickly to
confirm saving. Harmonier has 7 preset slots, which can be distinguished by
the colors of the footswitch LED. Recalling: Press the FAVORITE footswitch to
scroll up in the 7 slots; press the FAVORITE footswitch twice quickly to
scroll down in the preset slots.
Adjust the vocal effect
Reverb: Harmonier has a specialized reverb effect for the microphone signal.
Press and hold the SHARP while rotating the LEVEL to adjust the volume level
of the reverb.
The vocal tone mode: Harmonier provides FLAT, WARM, and BRIGHT, three tone
modes for the users to have the best vocal performance.
Enter the hidden mode (Please refer to the footswitch control part for
details), press SHARP to select tone mode, button LED indicates the currently
selected mode: Off for FLAT, RED for WARM, BLUE for BRIGHT.
Footswitch Control
- Right footswitch (On/Off): When the Harmonier is Off, press the right footswitch, and the footswitch LED will turn GREEN as the harmony effect and reverb are both On (including instrument reverb and vocal reverb); press the right footswitch again to turn Off the harmony effect. Press and hold the right footswitch for 1 second to turn Off the harmony effect and the reverb simultaneously (including the instrument reverb). The tone setting of the vocal will not be affected.
- Left footswitch (FAVORITE): Press the left footswitch to scroll up through 7 preset slots; press the left footswitch twice quickly to scroll down through the presets; press and hold the left footswitch for more than 1 second to save the current setting, the footswitch LED will blink for a few seconds to confirm saving. Notes: If there are any changes are made in the current preset slot without saving (including harmony mode, keynote, scale, and volume level), the FAVOURITE footswitch LED will blink for a reminder.
- Enter/quit the hidden mode: Press both two footswitches simultaneously, the footswitch LEDs will blink in YELLOW as it is in hidden mode. Press any footswitch again to quit.
Output Mode
Harmonier has two output modes: mixed mode and individual mode.
- Mixed mode: Press and hold the right footswitch while plugging in the power supply, the footswitch LED will blink in GREEN as it is set to mixed mode. In this mode, the 6.35mm output jack and the XLR output jack output the mixed microphone signal and instrument signal.
- Individual mode: Press and hold the right footswitch while plugging in the power supply, the footswitch LED will blink in RED as it is set to individual mode. In this mode, the 6.35mm output jack only outputs the instrument signal; the XLR output jack only outputs the microphone signal.
Notes: The output mode setting will not be lost after the pedal is powered Off.
Specifications
- INST input impedance value: 1M ohm
- 6.35mm output impedance value: 100 ohm
- MIC input impedance value: 2.14k ohm
- XLR output impedance value: 300 ohm
- Response frequency: 20-20kHz
- Power requirements: 9V/1.5A
- Dimensions: 86.6mm (D) x 125mm (W) x 60mm (H)
- Weight: 0.37kg
- Accessories: quick guide, power supply
Disclaimer: Parameter updates will not be notified separately.
MOGER
www.mooeraudio.com
SHENZHEN MOOER AUDIO CO. LTD
6F, Unit D, Jinghang Building, Liuxian 3rd Road, Bao’ an 71 District,
Shenzhen, China. 518133
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>