MOOER S1 Intellingent Pedal Instruction Manual

: June 1, 2024
: Mooer

Table of Contents

MOOER S1 Intellingent Pedal
Product Usage Instructions
FAQs
Precautions
Features
Specifications
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOOER S1 Intellingent Pedal

MOOER-S1-Intellingent-Pedal-product

Product Usage Instructions

Precautions
- Ensure to follow the precautions mentioned in the manual to prevent any damage to the device and ensure user safety.
Power Supply
- Use a power supply that meets UL, CSA, VED, or CCC standards. Make sure to unplug the power supply during thunderstorms and adhere to the manufacturer’s power requirements.
Cleaning
- Clean the unit with a soft, dry cloth. If necessary, slightly moisten the cloth. Avoid abrasive cleaners, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Features
- The device features a guitar input jack, left/right main output jack, USB port, master volume level control, power switch, headphone output, charging indicator, battery indicator, side panel indicator, Bluetooth indicator, A/B/C/D footswitches, input level indicator, and display screen.
Layout
- The layout includes various indicators and controls for easy operation of the device.
Start-Up Instructions
- To power on the device, toggle the power switch to On. Use the master knob for volume adjustment. Use footswitches for preset patch and bank selection. Press the B+C footswitch to switch between preset control mode and looper mode.
Battery Management
- Monitor the battery indicator to know when to charge the device. Charge using the USB port and observe the indicator colours for status updates.
Drum Machine/Looper
- Utilize footswitches for switching between preset control mode and looper mode. Follow specific instructions for recording loops using the footswitches.

FAQs

Q: Can I use any power supply with the device?
- A: No, it is recommended to use a power supply that meets UL, CSA, VED, or CCC standards and adheres to the manufacturer’s requirements.
Q: How do I know when to charge the battery?
- A: The battery indicator will blink red when the battery is low. Connect the device via USB to charge it.

Precautions

PLEASE READ CAREFULLY BEFORE PROCEEDING

Power Supply

Please use a power supply that meets UL, CSA, VED, or CCC standards
Please use the power supply that meets the manufacturer’s power requirement
Please unplug the power supply when the device is turned off or a during thunderstorm
Please do not expose the device which has battery power to heat or let it overheat
If battery leakage occurs, please do not touch the liquid with your skin or eye. If you do come in contact, please see a doctor
The battery included with the device may cause fire or chemical burns if handled improperly

Location
To avoid deformation, discolouration, or other serious damage, do not expose this unit to the following conditions:

Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Magnetic fields
High humidity or moisture
Strong vibrations or shocks

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleaners, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Features

Light-weight and portable design
Integrated lithium battery with support of mobile power bank charging
126 guitar effects
Comes with a tuner, metronome (x10), drum machine(x40), looper (80 seconds)
USB/OTG function for directly recording via mobile device
Individual headphone output
Two main outputs allow users to set stereo connections
Preset switching, drum machine, and looper can be controlled via footswitch smoothly
Specialized App for mobile device
MOOER Cloud can help users to share and download tones easily
The S1 is an intelligent platform and can be transformed into other effect modules by downloading and installing different firmware
High-quality Bluetooth audio function

Layout

$MOOER-S1-Intellingent-Pedal-fig-1 $1$$ $MOOER-S1 -Intellingent-Pedal-fig-1 $2$$

Anleitung Start

Power On the S1, the 1/0 indicator will illuminate, please set up the connection according to the diagram.

$MOOER-S1-Intellingent-Pedal-fig-1 $3$$ Power On/Off and Battery management

Power On/Off: Toggle the power switch to On/Off to power On/Off the device.
Battery management: When the device is On, the battery indicator. When the battery is about to run out, the battery indicator will blink in RED, please charge the device via the USB port.
Charge: When the power supply is plugged in, the charging indicator will illuminate. When the charging is complete, the indicator will turn GREEN.

Output volume level adjustment

Please utilize the MASTER knob at the side panel to adjust the master volume level.

Preset patch selection

Display: The LCD screen shows the currently selected preset patch.
Preset bank selection: Press footswitch A + B to Bank Down, and press footswitch C + D to Bank Up.
Preset patch selection: Press footswitch A, B, C, and D to select a preset patch.

Drum machine/Looper

Press the footswitch B + C to switch between the preset control mode and looper mode. (Preset mode/drum machine + looper mode)

Looper

REC: Press the footswitch A (footswitch LED will blink slowly) to enter recording standby mode. S1 will start recording when the first note is detected, the footswitch LED will start to blink quickly. The screen will show the recording loop as well.
PLAY: When the looper is at REC/STOP status, press the footswitch A to playback, and the footswitch LED will stop blinking. The screen will show the recording loop as well.
DUB: At the playback status, press the footswitch A to start DUB (The footswitch LED will blink quickly), and the screen will show the recording loop as well. Press the footswitch A to playback or dub, then press the footswitch A again to stop the dub.
STOP: During REC/PLAY/DUB status, press the footswitch B to stop, footswitch LED will stop blinking, and the loop in the display screen will stop rolling.
DELETE: Press and hold the footswitch B to delete the recorded track (the LED of footswitch A & B will be Off). The “LD” will display on the screen.

Drum machine

Play/stop: Press the footswitch D to play/stop the drum machine.
TAP: Press the footswitch C to enter TAP mode (The footswitch LED will blink, and the blinking speed synths with the drum machine speed). Press the footswitch C for more than 3 times to set the drum machine speed. The TAP mode will quit automatically after being idle for 3 seconds.
Drum groove selection: Press and hold the footswitch C for 2 seconds, the footswitch C/D will start to blink. Press the footswitch C or D to switch between drum grooves. The groove selection mode will quit automatically after being idle for 3 seconds, the footswitch LED will stop blinking. The display screen will show the number of the selected drum grooves.

Sync mode

Sync Off: When the sync mode is Off, the loop and drum machine will not sync with each other. The looper will start to record when the input signal is detected, the drum machine will not start to play automatically.
Sync On: When the sync is On, press the footswitch A, and the drum machine will have 4 count-in beats according to the setting speed, then the looper start to record and the drum machine starts to play automatically; when the looper stops recording, the drum machine will stop simultaneously. The looper restarts and the drum machine will restart as well. The speed and groove settings need to be set up properly before the recording starts, as those settings cannot be changed during recording. (During recording, the drum machine can be muted, but it cannot be stopped)

Tuner

In the preset mode, press and hold any footswitch for 1 second to enter the tuner.

Bluetooth

Please open the Bluetooth menu of your mobile device, search for S1, and confirm connecting. Then the S1 can play the audio tracks from the mobile device via Bluetooth, and the Bluetooth indicator will illuminate.

Bluetooth

Prime S1 supports USB directly recording with mobile phone/tablet via OTG cable, users can monitor the audio track via the OUTPUT or the headphone output jack.
In the MIXER menu of the Prime S1 App, users can adjust the OTG recording output level, the audio playback output level, and the instrument input level.
It is recommended to use the USB-C to USB-A cable.