Jennov C.2023.090.E Home Security Outdoor Wireless Camera User Guide
- June 17, 2024
- JENNOV
Table of Contents
- Jennov C.2023.090.E Home Security Outdoor Wireless Camera
- Product Usage Instructions
- What’s included
- Product Overview
- Installation
- Installing Camera
- CloudEdge App Installation and Setup
- Camera Connection Steps
- FAQS
- Warranty
- Contact
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Jennov C.2023.090.E Home Security Outdoor Wireless Camera
Product Specifications
- Model: C.2023.090.E
- Max SD Card Storage: 128GB
- Reset Button: Press and hold for 5-8 seconds to restore factory settings
- File Format : FAT32
- Wifi Connectivity: Yes
- Solar Panel Angle: 30-45 degrees from horizontal
Product Usage Instructions
Inserting Micro SD Card:
Make sure to insert the Micro SD card following the directions shown in the picture to prevent it from getting stuck in the camera. The camera supports Micro SD cards up to 128GB, with 64GB cards being more compatible.
Resetting the Camera:
To reset the camera to factory settings, press and hold the Reset button for 5-8 seconds.
Camera Installation:
Select a height of 7-10 ft (2-3m) above the ground for optimal motion sensor detection range. Avoid direct sunlight exposure. Use the provided position stickers and screws for installation.
Testing Wifi Signal:
Prior to installation, test the Wifi signal quality at the chosen location using a cell phone to ensure good connectivity withthe Wifi router.
Solar Panel Installation:
Install the solar panel at an angle of 30-45 degrees from the horizontal. Connect the power cord to the Type-C port on the camera after opening the silicone cover at the bottom.
Frequently Asked Questions (FAQ)
- Q : How do I contact support for this product?
- A : You can reach out to support@jennov.com for any assistance or queries regarding this product.
- Q: What is the maximum storage capacity supported for the Micro SD card?
- A: The camera supports Micro SD cards up to 128GB, with 64GB cards being more compatible.
What’s included
Solar Camera
Battery Camera
WiFi Camera
Note : The package list should refer to the list of corresponding camera Models.
Product Overview
CAUTION : Please insert the Micro SD Card according to the direction shown in the picture. If it is not inserted correctly, it may get stuck in the camera.
SD card port
Support micro SD card for local storage (Max 128GB)
Note: 64G cards will be more compatible, TF card is also known as microSD
card
- Reset button: Used to restore the camera to factory settings (Press and hold on 5-8s) Card capacity requirements: 8-128 GB Read and write speed requirements: Class10 level File format: FAT32
CAUTION : Please insert the Micro SD Card according to the direction
shown in the picture. If it is not inserted correctly, it may get stuck in the
camera.
SD card port: Support micro SD card for local storage (Max 128GB)
Note: 64G cards will be more compatible, TF card is also known as microSD
card
- Reset button: Used to restore the camera to factory settings (Press and hold on 5-8s) Card capacity requirements: 8-128 GB Read and write speed requirements: Class10 level File format: FAT32
Installation
- Drilling according to position sticker, drill bit:15/64 (6mm)
- Insert the plugs
- Tighten the screw
What is required:
Installing Camera
Select height and location
Install the camera 7-10 ft (2-3m) above the ground. This height maximizes the
detection range of the motion sensor of the camera. Avoid placing the camera
in direct to sunlight.
Test the Wifi signal at the installation position
Use a cell phone to test Wifi signal quality at the installation position before installing a camera, make sure the Wifi router can provide a good Wifi signal.
Installation method of solar panels
- Please install the solar panel at approximately 30-45 degrees from horizontal, as shown in the diagram below.
- The installation between the solar panel and the camera is illustrated in the following diagram (open the silicone cover at the bottom of the camera and plug in the power cord to the Type-C port).
Panel installation tips:
- Please place the panel in a south-facing direction with good sunlight exposure.
- Install the solar panel in an appropriate location, avoiding obstruction from eaves, tree branches, etc.
Connection Tips
- Both the phone and the camera must be placed near the Wi-Fi router, within a distance of 2 meters.
Friendly reminder: Please fully charge the camera with a USB cable before connecting. The camera can only connect to a 2.4GHz Wi-Fi signal. 5GHz Wi-Fi is not supported.
CloudEdge App Installation and Setup
Search “CloudEdge” on apple store or Google Play to download the app.
- from Google Play
- from Apple store
- or Scan the following QR code
Download App ( IOS/ Android )
Tips: Please focus on 2 permissions below when this APP at the first time.
- Allow “CloudEdge” to access mobile cellular data and wireless LAN, or it will fail to add an IP Camera.
- Allow the “CloudEdge” APP to receive the pushed message, or the cellphone will not receive alarm push when motion detection or audible alarm is triggered.
Camera Connection Steps
FAQS
-
The camera can not connect to WIFI how to do it?
A: Reset the camera, press and hold the “RESET” for 10 seconds until the “ding” beep to indicate a successful reset and then connect again. Please note that the camera only supports 2.4G WiFi. -
How to watch the video playback?
A: Click “Replay” in the main interface to play back videos stored on the TF card. -
How to share with others and how many devices can I share at most?
A: Go to Settings, and click “Invite new member” to set up sharing. For the main account, you can share with 3 users, and support 3 users to watch at the same time. -
Why can’t I connect to the network? Firstly please try to reset the camera, then make sure your router is 2.4G, confirm and re-add the camera.
-
Can the camera record without a network? A: The camera can record video even when it is offline.
Warranty
Warranty Tips
Please fill in the following information or scan QR code to activate the free
12-month warranty from the order date on. After finish filling or scanning,
please take a picture and send it to the
email(support@jennov.com). Then your free
warranty will take effect! During the warranty period, if any parts of a
product are damaged, please contact us immediately and we will nrovide a
satisfactory solution
- Order Date:
- Order Number/ID:
- Buyer E-mail:
- Buyer Tel:
Scan the QR code above to access more detailed manuals and instructional videos.
- QR code for detailed manual
- QR code for connection guide
Notes:
- The manual is a quick guide. Please scan the QR code above to access the detailed manual and instructional videos, and save the QR code and the electronic document manual.
- If there are any issues, please contact our after-sales support for assistance.
Contact
- www.jennov.com
- support@jennov.com
- U.S Hotline: +1 3239021978
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>