ALEFEET C1 Water Scooter Accessories Instruction Manual
- June 1, 2024
- ALEFEET
Table of Contents
ALEFEET C1 Water Scooter Accessories
Specifications
Feature | Description |
---|---|
Product Name | KICKBOARD C1 Water Scooter Accessories |
Installation Method | Slide and click the attachment, with an orange button for |
the release
Operation| Left and right button press to start and stop
FAQ
How do I know the kickboard is properly attached to the main unit?
You should hear a click sound once the kickboard slot is aligned and fully inserted into the top rail of the main unit.
What should I do to start the water scooter?
Press the left and right buttons on the kickboard simultaneously after powering on the main unit to start the scooter.
How can I stop the scooter?
Releasing any of the buttons during operation will stop the scooter.
How can I detach the kickboard from the main unit?
Press the orange button located between the main unit and the kickboard and slide the control handle out in the opposite direction to detach it.
Installation Instructions
STEP 1
- Align the kickboard slot with the top rail of the main unit, and slide it until you hear a “click” sound to install it in place.
STEP 2
- Power on the main unit (see the Main Unit manual).
- Simultaneously press the left and right buttons on the kickboard to start the scooter. Release any button the scooter will stop.
- To remove the kickboard, press the orange button located between the main unit and the kickboard, and slide the control handle out in the opposite direction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>