VIMAR LINEA 30210.USBx Universale USB C Plug User Guide

: June 17, 2024
: VIMAR

Table of Contents

VIMAR LINE 30210.USBx Universal USB C Plug
Product Information
Product Usage Instructions
FRONT VIEW
FEATURES
INSTALLATION RULES
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIMAR LINE 30210.USBx Universal USB C Plug

Product Information

Specifications:
- Model Numbers: LINEA 30210.USBx, EIKON 20210.USB, PLANA 14210.USB
- USB Type: USB-C
- Input Voltage: 250 V~ 50/60 Hz
- Current Rating: 185 mA
- Efficiency: 82%
- Power Factor: 73%
- IP Rating: IP20

Product Usage Instructions

Connecting the Device:
- Locate the USB Type-C port on the device and ensure it is clean and free from obstructions. Insert the USB-C cable securely into the port.
Powering the Device:
- Plug the other end of the USB-C cable into a power source that matches the input voltage specifications of the device (250 V~50/60 Hz).
Using the Device:
- Once connected and powered, you can now use the device for data transfer or charging compatible devices that support USB Type-C connections.
Frequently Asked Questions (FAQ):
- Q: Where can I find more detailed information about the device?
- A: You can download device details and WEEE information in PDF format from the product data sheet on www.vimar.com.
- Q: What do the efficiency and power factor values indicate?
- A: The efficiency percentage indicates how much input power is converted into output power, while the power factor represents the efficiency of power usage by the device.
- Q: Is the device suitable for outdoor use?
- A: The device has an IP20 rating, which means it is suitable for indoor use only and should not be exposed to water or extreme environmental conditions.

LINE

30210.USB

Read the instructions before installation and/or use

FRONT VIEW

Graphic representation of the Linea series.
The position of terminals, wiring, and functions is also identical for Eikon, Arké, and Plana.

FEATURES

Power supply
- 250 V~ 50/60 Hz
Power consumption
- 185 mA
Output voltage
- 5.0 V d.c. (± 5%) ES1 e/o
Max output load
- 3,0 A
Output power
- 15.0 W
Average efficiency in active mode
- 82%
Efficiency with low load (10%)
- 73%
Power with no load
- 0.03 W
Protection degree
- IP20
Device in class II
Installation for CAT

INSTALLATION RULES

Installation must be carried out by qualified persons in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed. The device can be installed in a flush mounting box or surface mounting box and completed with Linea, Eikon, Arké, or Plana cover plates in dust-free places, protected from accidental impacts and away from heat sources.

IMPORTANT

An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply.
An SPD (surge protection device) must be installed upstream of the system to reduce the overvoltage category from III to II.
Install the device at a height of no more than 2 m

REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

DEVICE DETAILS AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE PRODUCT DATA SHEET ON www.vimar.com (the QR code opens the data sheet of art. 30210. USBB, which shares the same instructions sheet as art. 30210.USBx-20210.USB-19210.USB-14210.USB).