HUSKY 50981 Floor Liner User Guide
- June 13, 2024
- Husky
Table of Contents
HUSKY 50981 Floor Liner
Product Information
- Product Name: Floor Liners
- Part Number: PT #50981
- Product Type: Custom Molded Front Floor Liners
- Manufacturer: Husky Liners
- Warranty: Lifetime Warranty (For more details, view the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty)
- Document: 50981 X-act Contour Front Floor Liner.docx
- Document Date: 5_10_2023
Product Usage Instructions
-
Move both front seats to their most rearward position.
-
Remove any existing floor mats from the vehicle.
-
Position the custom-molded front floor liners as shown above.
The left or driver’s side liner should be positioned on the left side, and the right or passenger’s side liner should be positioned on the right side. -
Ensure that the driver’s side liner is secured to the factory floor mat retention posts.
-
Once the liners are properly installed, move the front seats to their desired locations.
Note: It is recommended to refer to the product manual for any additional instructions specific to your vehicle model or for any maintenance guidelines.
ZCARE AND USE INSTRUCTIONS
Thank you for selecting an X-act Contour® Floor Liner from Husky Liners. Your
new front floor liners are custom molded to fit your specific vehicle. The
liners are made to take the place of your factory floor mats. For correct fit,
it is necessary to remove the factory floor mats before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and
extremely tough and durable. The easiest way to clean your liners is with a
damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use
of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products
make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR CUSTOM MOLDED FRONT FLOOR LINERS
TO EASE INSTALLATION OF YOUR FRONT LINERS, MOVE BOTH FRONT SEATS TO THEIR MOST REARWARD POSITION. NEXT, REMOVE ANY EXISTING FLOOR MATS AND INSTALL THE LINERS, POSITIONED AS SHOWN ABOVE. TAKE CARE THE DRIVER’S SIDE LINER IS SECURED TO THE FACTORY FLOOR MAT RETENTION POSTS. ONCE THE LINERS ARE INSTALLED, MOVE THE FRONT SEATS TO THEIR DESIRED LOCATIONS.
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-
warranty
50981 X-act Contour Front Floor Liner.docx
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>