JUMBO 1203258 Digital Watch User Manual
- June 17, 2024
- JUMBO
Table of Contents
JUMBO 1203258 Digital Watch
INSTRUCTIONS FOR USE
Press the “LIGHT” button to turn on the pulsing multicolor light. The light
will switch off automatically after a while.
DISPLAYING THE TIME AND DATE
Normal display shows the time in hours and minutes format. To see month and
date, press B1 once.
To set the month, press immediately B1 again. Then press B2 and continue until
the required month setting is reached.
To set the date, press immediately B1 again. Then press B2 and continue until
the required date setting is reached.
To set the hour, press immediately B1 again. At this time the right side will
display the letter “A” or “P”, “A” for AM or “P” for PM. Then press B2 and
continue until the required hour setting is reached. In you want to switch
from “AM” to PM”, just continue pressing the B2 button until the required
setting is reached. To set the minutes, press immediately B1 again, then press
B2 and continue until the required minute setting is reached.
To resume normal time display, press B1 again. When displaying time press B2
once to show the month and date. Press immediately B2 once more to show the
seconds.
Press immediately B2 again to resume to the normal time display.
9AC00188-frozen
CAUTION BATTERY:
- Non-rechargeable batteries are not to be recharged
- Never mix different types of batteries
- Empty batteries are to be removed from the item. Do not mix them With the new ones.
- Never short-circuit the contacts. Follow the battery polarity indications.
- Change the batteries if they do not work properly or they have leak.
- Never put the batteries near the fire or heat sources, nor throw them into the fire.
- Please wash immediately if the skin or clothes touched the roquin from the battery.
- Changing of batteries to be done by datils. Keep away from children.
- In case of wallowing seek medir.al attention immediately!