CLAYMORE CAPON 200H Headlamp User Manual
- June 17, 2024
- CLAYMORE
Table of Contents
CLAYMORE CAPON 200H Headlamp
CLAYMORE Cap on 200H
CLP-2000
This portable light contains Li-Polymer batteries. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications of this product will void the warranty. Misuse of CLAYMORE products may cause user harm.
Caution
-
Do not use near high temperatures such as fires or heating equipments. It may cause explosion and ignition.
-
This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
If the product gets soaked, please quickly wipe it off. -
Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
-
Do not touch the light source directly as it may become very hot during use.
-
Do not use if the product exceeds the operating temperature range (-10 ° C to 40 °C).
-
Do not look directly into the LED light source.
-
Please do not place in the reach of infants. It may cause swallowing of parts or injury.
-
Adult supervision is necessary when used by children. Misuse of head lamp may cause injury or electric shock.
-
Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock. -
Do not disassemble or modify the product.
-
Do not touch the connector with wet hands. There is a danger of electric shock.
-
When adjusting the angle, please do not bend with force. It may cause damage to the product.
-
Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.
- Heat may occur when you use with maximum brightness in turbo mode.
- Do not cover the lens when focused light (Mode1,2) is on.
- The heat from focused light may cause damage to the object.
- Turn off the power when storing after use.
Components
Operation
Sensor Mode
Sensor mode automatic OFF function
To reduce unnecessary power consumption, the sensor mode will automatically turn off after 2hours when there is no movement.
Power automatic OFF function
If a human body or object continues to be close to the sensor over 20 seconds,
the power is turned off to prevent overheating.
To prevent false sensor detection, turn off the sensor when storing after use.
The sensor may not work under sunlight or in very bright places.
This lantern contains memory function that returns to the last setting when
turn off and on.
When plugging in the charging cable when fully discharged, the LED lighting
part flashes momentarily. This is normal and not a defect.
Instructions
Attaching to a cap
Fully insert clip to the bill of the hat and adjust angle to use properly.
Specification
Component
Caution for long-term storage
- To prevent false sensor detection, turn off sensor when storing after use.
- If the battery is completely drained, the battery indicator might not flash.
- If this happens, plug the USB cable back in or press the button to turn the battery indicator on again.
- For long-term storage, fully recharge the battery.
- Please keep in mind that if stored below -10°C the battery life may be affected.
- Please keep in a dry place without moisture.
Warranty
- Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge. Some shipping or handling charges may be involved.
- Warranty period: 1 year.
Charged Service
- Damage caused when the warranty period is over.
- Damage caused due to the user’s mishandling, abuse, or improper operation.
- Damage caused by arbitrary or personal repair or disassemble in unauthorized service center.
- Damage from input electricity or cable defect.
- Damage caused by natural disaster.
Prism Co., Ltd.
221, Pyeongcheon-ro, Bupyeong-gu, Incheon, Republic of Korea
www.claymorelight.com ·
www.prismlight.co.kr ·
info@prismlight.co.kr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>