CLAYMORE CAPON 120D Rechargeable Cap Light User Manual
- June 17, 2024
- CLAYMORE
Table of Contents
CLAYMORE CAPON 120D Rechargeable Cap Light
Product Maintenance
- Clean the product with a soft cloth and avoid using abrasive cleaners.
- Avoid exposing the product to direct sunlight for extended periods.
- Store the product in a cool and dry place.
- Regularly check and tighten any loose screws or connections.
Product Troubleshooting
- If the product does not turn on, check if it is properly connected to a power source.
- If there is no sound or distorted sound, check the audio settings and connections.
- If the display is not working, check the cable connections and adjust the brightness settings.
- If the product is not responding to commands, try resetting it or contacting customer support.
This portable light contains Li-Polymer batteries. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications of this product will void the warranty. Misuse of CLAYMORE products may cause user harm.
Caution
- Do not use near high temperatures such as fires or heating equipment. It may cause explosion and ignition.
- This product is water resistant. However, if left in the rain for a long time, it may cause malfunction. If the product gets soaked, please quickly wipe it off.
- Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
- Do not touch the light source directly as it may become very hot during use.
- Do not use if the product exceeds the operating temperature range (-10 ° C to 40 °C).
- Do not look directly into the LED light source.
- Please do not place in the reach of infants. It may cause swallowing of parts or injury.
- Adult supervision is necessary when used by children. Misuse of the headlamp may cause injury or electric shock.
- Do not insert any metal parts into the terminal block of the connector. It may cause heat, explosion, or electric shock.
- Do not disassemble or modify the product.
- Do not touch the connector with wet hands. There is a danger of electric shock.
- After use, be sure to turn off the power. If not, it may cause leakage.
- When adjusting the angle, please do not bend with force. It may cause damage to the product.
- Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.
Operation
Mode Change
[Sensor Mode]
Sensor mode automatic OFF function
To reduce unnecessary power consumption, the sensor mode will automatically
turn off after 5hours when there is no movement.
To prevent false sensor detection, turn off the sensor when storing after use.
warning: The sensor may not work under sunlight or in very bright places.
Charging Method
Open the rubber cover and connect the USB cable to charge the lantern.
Battery Level Check
When charging, the battery indicator will flicker in 3 steps to show the
battery remaining.
(To see the remaining battery, press power button)
This lantern contains a memory function that returns to the last setting when turned off and on.
Battery level indicator
Instructions
Attaching to a Cap & Hard Hat
Fully insert the clip to the visor of the cap/hard hat and adjust the angle to
use it properly
Please check if the clip is fully attached to cap bill before use.
Angle adjustment
Lantern Hook
Specification
Contents
Caution for long-term storage
-
To prevent false sensor detection, turn off the sensor when storing after use.
-
If the battery is completely drained, the battery indicator might not flash.
If this happens, plug the USB cable back in or press the button to turn the battery indicator on again. -
For long-term storage, fully recharge the battery. (Repeat every six months)
-
Please keep in mind that if stored below -10°C the battery life may be affected.
-
Please keep it in a dry place without moisture.
Warranty
- Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or an authorized service center on free of charge. Some shipping or handling charges may be involved.
- Warranty period: 1 year.
Charged Service
- Damage is caused when the warranty period is over.
- Damage is caused due to the user’s mishandling, abuse, or improper operation.
- Damage caused by arbitrary or personal repair or disassembly in the unauthorized service center.
- Damage from input electricity or cable defect.
- Damage caused by natural disaster
FAQ
- Q: Is this product compatible with other devices?
- A: Yes, this product is compatible with various devices such as smartphones, tablets, and computers.
- Q: Can I use this product while charging?
- A: Yes, you can use this product while it is charging. However, it may affect the charging speed.
- Q: How long is the warranty period for this product?
- A: The warranty period for this product is 1 year from the date of purchase.
Prism Co., Ltd.
101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36, Bucheon-si, Gyeonggi-do,
Korea www.claymorelight.com ·
www.prismlight.co.kr ·
info@prismlight.co.kr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>