CLAYMORE CAPON 80C Rechargeable Cap Light User Manual
- June 17, 2024
- CLAYMORE
Table of Contents
CLAYMORE CAPON 80C Rechargeable Cap Light
Product Information
Specifications
- Model : 6TFS.BOVBM
- Dimensions : N/A
- Weight : N/A
- Water Resistance : Yes
Product Usage Instructions
Important Safety Instructions
- Do not use near high temperatures such as fires or heating equipment. It may cause explosion and ignition.
- This product is water-resistant. However, if left in the rain for a long time, it may cause malfunction. Do not disassemble or modify the product.
- Do not touch the connector with wet hands. There is a danger of electric shock.
- After use, be sure to turn off the power. If not, it may cause leakage.
- When adjusting the angle, please do not bend with force. It may cause damage to the product.
- Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.
Product Care
To ensure the longevity of your product, follow these care instructions:
- Avoid exposing the product to extreme temperatures or moisture.
- Clean the product with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners on the product.
Usage Instructions
Power On/Off
To power on the product, press and hold the power button for a few seconds. To power off, repeat the same process.
Adjusting the Angle
To adjust the angle of the product, gently rotate it to the desired position. Avoid bending with force to prevent damage.
Charging
Connect the product to a power source using the provided charging cable. The product will start charging automatically. Once fully charged, disconnect the cable.
FAQ
- Q: Can I use this product near high temperatures?
- A : No, it is not recommended to use this product near high temperatures such as fires or heating equipment as it may cause explosion and ignition.
- CLAYMORE CAPON 80C Rechargeable Cap Light
- Yes, this product is water-resistant. However, if left in the rain for a long time, it may cause malfunction.
- Q: Can I disassemble or modify the product?
- A : No, it is important not to disassemble or modify the product as it may result in damage or malfunction.
- Q: Can I touch the connector with wet hands?
- A : No, it is dangerous to touch the connector with wet hands as there is a risk of electric shock.
- Q: What should I do after using the product?
- A : After use, be sure to turn off the power to avoid leakage.
- Q: Can I drop or impact the product?
- A : No, dropping or impacting the product can cause damage to the inside and result in unexpected failures. Be careful not to apply impact to the body.
This portable light contains Li-Polymer batteries. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications of this product will void the warranty. Misuse of CLAYMORE products may cause user harm.
Caution
- Do not use near high temperatures such as fires or heating equipment. It may cause explosion and ignition.
- This product is water resistant. However, if left in the rain for a long time, it may cause malfunction. If the product gets soaked, please quickly wipe it off.
- Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
- Do not touch the light source directly as it may become very hot during use.
- Do not use if the product exceeds the operating temperature range (-10 °C to 40 °C).
- Do not look directly into the LED light source.
- Please do not place in the reach of infants. It may cause swallowing of parts or injury.
- Adult supervision is necessary when used by children. Misuse of the headlamp may cause injury or electric shock.
- Do not insert any metal parts into the terminal block of the connector. It may cause heat, explosion, or electric shock.
- Do not disassemble or modify the product.
- Do not touch the connector with wet hands. There is a danger of electric shock.
- After use, be sure to turn off the power. If not, it may cause leakage.
- When adjusting the angle, please do not bend with force. It may cause damage to the product.
- Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.
Components
Operation
- Press shortly to turn on the light. Repeat to turn off the light.
- When the light is ON, press and hold the button to increase brightness. Repeat to decrease brightness.
- Hold down the button and press button to sequence to adjust brightness in 5 steps.
- The light blinks once when Maximum and Minimum brightness are reached
Mode Change
Sensor Mode
When light is ON, press the button over 2 seconds to activate Sensor Mode. Repeat to inactivate Sensor Mode.
While the sensor operating, the sensor indicator will flash
- When the Sensor is ON, wave the hand by the sensor to turn the light on and off.
- Detection distances range: 1~5cm
Sensor mode automatic OFF function
- To reduce unnecessary power consumption, the sensor mode will automatically turn off after 5 hours when there is no movement.
- To prevent false sensor detection, turn off the sensor when storing after use.
- The sensor may not work under sunlight or in very bright places.
Charging Method
Instructions
- Attaching to a Cap & Hard Hat
- Fully insert the clip to the visor of the cap/hard hat and adjust the angle to use it properly.
- Angle adjustment
- Adjustable up to 180 degrees and easy to use focused and diffused light.
- Lantern Hook
- Compatible with a carabiner or hang-on string with the hook.
Specification
Contents
Caution for long-term storage
- For long-term storage, fully recharge the battery. (Repeat every six months)
- Please keep in mind that if stored below -10°C the battery life may be affected.
- Please keep it in a dry place without moisture.
- If the battery is completely drained, the battery indicator might not flash. If this happens, plug the USB cable back in or press the button to turn the battery indicator on again.
- To prevent false sensor detection, turn off the sensor when storing after use.
Warranty
- Thank you for purchasing the CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or an authorized service center on free of charge. Some shipping or handling charges may be involved.
- Warranty period : 1 year.
Charged Service
- Damage is caused when the warranty period is over.
- Damage is caused due to the user’s mishandling, abuse, or improper operation.
- Damage caused by arbitrary or personal repair or disassembly in an unauthorized service center.
- Damage from input electricity or cable defect.
- Damage caused by natural disasters.
101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36, Bucheon-si, Gyeonggi-do, Korea
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>